BigClur Posted July 7, 2015 Report Share Posted July 7, 2015 Noice! Awesome car.. I wish I had something more complete but I'm happy I found something, and I got mine dirt cheap so can't complain to much. 2 Quote Link to comment
Draker Posted July 7, 2015 Report Share Posted July 7, 2015 Right now, still trying to take off these stubborn ball joints, then I can move on. I need assistance tbh Separated in under 5 minutes each with this. http://www.harborfreight.com/3-4-quarter-inch-forged-ball-joint-separator-99849.html 2 Quote Link to comment
That4doorKiD Posted July 7, 2015 Author Report Share Posted July 7, 2015 I used a stupid puller ment only for tie rods and it wasn't the greatest, it kept slipping, but i'll choose the more easier route in the future :thumbup: 1 Quote Link to comment
Draker Posted July 7, 2015 Report Share Posted July 7, 2015 What's done is done. Good work. 2 Quote Link to comment
That4doorKiD Posted August 3, 2015 Author Report Share Posted August 3, 2015 Cable throttle made, fit and crypmed finally Bought some new suspension parts from autozone DONT BUY FROM CHEAPY DURALAST :devil: My tie rod ends didn't fit the sleeves so I returned em and bought some from Rare Parts :geek: 1 Quote Link to comment
That4doorKiD Posted August 3, 2015 Author Report Share Posted August 3, 2015 last month, I turned 17! so that's what got me new suspension parts. While, I was putting on some headers, I saw a cracked bolt in the block, and after taking off the cast iron headers, I also cracked a bolt. Happened so sudden. They were not sticking out enough to be easily taken out soo... I'm putting in a rebuilt L-16 previous owner had rebuilt it, not fresh but also not old! :devil: I wanted to paint the engine bay and rewrap the wires but my project has been taking too long, I just want it running now and then start to do the pretty :sneaky: Plus+ my Dad wanted me to get it running already too Haha! I agree tho It has the early 210 head, not the best for performance but it'll do for now until my L-20 comes :yawn: Oo goody, look at what's going on there. Dogleg 5speed short tail, (off a 200sx I was told) Clutch on with alignment thingy Dad was helping me and we should be putting it in today. tranny mount from an L-20b 5 speed that fit the 510? The rubber mount on the dogleg from a 200sx did not fit/adapt to the 510 tranny mount? wierd well luckily i found a L-20 5 speed that did adapt [510 to Rubber to Tranny] 2 Quote Link to comment
That4doorKiD Posted August 16, 2015 Author Report Share Posted August 16, 2015 Mazda B2200 filler neck upgrade :thumbup: drilled 510 ring holes, grinded 510 ring also Imma be loud, and low, so MIGHT AS Well BE SLOW! :devil: HAHAHAA get it L-16 took out my l18, put this junk in Learned my lesson from last time, so tapping the blind holes Clean as a whistle just need Comp. air in their For the dogled 5 spd, and just waiting on my 280zx tranny rubber mount to come in :w00t: TEST FIT Headers clear, mount is slotted for a reason, :rofl: bearly figured that out like a rookie My flange will need to be opened up a bit as I can see, THX to Dad for slicing its shape with torch Glasspack will make it deep toned rite? YUP + tail piper muffler Exhaust from previous 510, correct shape just hanging lobsided there 1 Quote Link to comment
That4doorKiD Posted August 16, 2015 Author Report Share Posted August 16, 2015 So I did assemble my tie rods, and ball joints, bushings, new everything etc.. :geek: HAD to upgrade to 69' and up steering knuckles cause of the flipping ball joint 14mm size. 69' and up tie rod sleeves also junkyard found -32/36 DGV Wibber fartuletor gonna put on 1 Quote Link to comment
That4doorKiD Posted August 20, 2015 Author Report Share Posted August 20, 2015 Finished ggas tank +fuel filler neck upgrade :rofl: MAZDA B2200 truck fuel neck FYI got idea from the popular how-to write up 1 Quote Link to comment
banzai510(hainz) Posted August 20, 2015 Report Share Posted August 20, 2015 YOur not going to put that muffler on right?????? get s stock looking turbo case type. they got straight thru versions. 2 Quote Link to comment
That4doorKiD Posted August 20, 2015 Author Report Share Posted August 20, 2015 YOur not going to put that muffler on right?????? get s stock looking turbo case type. they got straight thru versions. Yeah, I really like the look of this muffler :thumbup: ?!! You no fan of this, 1 Quote Link to comment
banzai510(hainz) Posted August 20, 2015 Report Share Posted August 20, 2015 Yeah I know. Its your car Im just preventing you from looking lLAME later. As a stock type(small 13in case) turbo you can tuck it up so it dont hit goig into driveways and the such. When I was young having a playboy Rabbit sticker on the car was cool also Then Local Motion stickers DG then Monster ect ,Double wiper blades. Wire wheels that stick out. Gabrial HiJacker shocks BIG Wings , Spinner wheels, ect.... Converting Datsun trucks to Square headlights(lame now) Wings on Subarus, these look lame now. Ok I boxed flair my 1st 510, Now looking back BIG MISTAKE cool at the time 2 Quote Link to comment
That4doorKiD Posted August 21, 2015 Author Report Share Posted August 21, 2015 I'll keep your advice in mind an just use the expansion+u bolt method to put it on, that way I'll be able to interchange mufflers!. BTW my taste for 510's has shaped up alot,for ex..bre spooks only go with fender mirrors and my taste for only classic rims, ssr and hayashi I may change my style of the muffler probably soon hahaa I don't like dimes flared,at all unless bre slammed with 13" libres 1 Quote Link to comment
rusty12ver Posted August 21, 2015 Report Share Posted August 21, 2015 Nice work, might want to change those couplers on the fuel filler. The fuel will break it down and turn them to mush. AutoZ can get fuel filler hose. Edit: summit sells a magnaflow round body 2" in/out for 85.00, it fits nice and tucks under. 2 Quote Link to comment
That4doorKiD Posted September 14, 2015 Author Report Share Posted September 14, 2015 Got my car running, with a huge exhaust leak, my header flange or exhaust hose down there :rofl: Just need to tune it right http://vid1293.photobucket.com/albums/b600/h7030/VID_26451208_073644_zpsqmvgom06.mp4 1 Quote Link to comment
Jester Posted September 14, 2015 Report Share Posted September 14, 2015 Cool car man. Keep it up kid! :thumbup: What year is your 620? That looks like the color of my '79. A pretty rare color for the '79 trucks. 2 Quote Link to comment
That4doorKiD Posted September 14, 2015 Author Report Share Posted September 14, 2015 Cool car man. Keep it up kid! :thumbup: What year is your 620? That looks like the color of my '79. A pretty rare color for the '79 trucks. Thx! IT IS A 79' Haha 1 Quote Link to comment
Jester Posted September 14, 2015 Report Share Posted September 14, 2015 Could I talk you into taking a pic of the color in the interior. Somewhere where the paint isn't faded? And what is the code on your core support? Mine was removed when the PO painted it baby blue. :sick: 2 Quote Link to comment
banzai510(hainz) Posted September 14, 2015 Report Share Posted September 14, 2015 put a nice exhaust on there.with a Superturbo Dynomax, small case 2 inch The stock exaust manifold is the best most headers suck, they warp and crack and fitting issues 1 Quote Link to comment
That4doorKiD Posted September 15, 2015 Author Report Share Posted September 15, 2015 My video, yes I said it doesn't misfire alot, cause I was just so stoked and excited haha! :sweat: 5 degrees and 900 rpm idle, my first time tuning a car by myself SOUNDS awesome with a glass pack and WITHOUT a turbo muffler :fu: 1 Quote Link to comment
That4doorKiD Posted September 15, 2015 Author Report Share Posted September 15, 2015 Could I talk you into taking a pic of the color in the interior. Somewhere where the paint isn't faded? And what is the code on your core support? Mine was removed when the PO painted it baby blue. :sick: yeah I'll make a video tomorrow and sadly the paint code is scratched off too. Sorry Quote Link to comment
Ranman72 Posted September 15, 2015 Report Share Posted September 15, 2015 sounds pretty good to me great job 1 Quote Link to comment
Jester Posted September 15, 2015 Report Share Posted September 15, 2015 sadly the paint code is scratched off too. Sorry :no: Oh well. Don't worry about it then. I was just reeeeeaaallly wanting the correct paint code. Car sounds good by the way. :thumbup: 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.