Jump to content

little miss. to-do list pg 38 and first post


hobospyder

Recommended Posts

  • Replies 876
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

so this happened

 

20150703_094021.jpg
 
20150703_094124.jpg
 
still no headlights after install this morning, next up is turn signal switch but that'll wait until after tonight since i plan on driving to a bbq this afternoon, might get figured out there who knows.
 
went to the beach though
 
20150703_141350.jpg
  • Like 3
Link to comment

took her to the dump yesterday and lost my keys because i had them on top of the cab and they got tangled up in the ratchet straps. luckily i didn't have to go fishing in the pile. went to start her up and the ignition switch ran away 

 

20150708_164451.jpg

 

so held onto the back end of it and got home, tightened the little plastic ring thing back on at the house instead of sitting in the dump building any longer. weird ass dump. i'll have to take a picture next time i go. then i headed down to the shop to get some cleaning done, put together my extra engine stand to throw the z22 motor that denmarkboy brought up for me when he brought up the canby truck and realized i didn't have any bolts to hold it on there....

 

20150708_173557.jpg

 

so tear down commenced in place

 

20150708_175628.jpg

 

here's the pile of parts at the end

 

20150708_190952.jpg

 

bare-ish block

 

20150708_190956.jpg

 

that hammer came in handy btw, #2 and #3 pistons didn't want to come out without some effort

 

20150708_191059.jpg

 

20150708_191057.jpg

 

20150708_191055.jpg

 

20150708_191052.jpg

 

all lined up even though i don't plan on using them or the block

 

20150708_191028.jpg

 

l20b crank above, z22 below

 

20150708_191026.jpg

 

and i can tell you the z22 crank weighs more. also, after removing the lower end and internals, found out i could pick up and move around the block by myself which was nice. gonna get it pressure washed and cleaned up and it'll probably be a table after a fashion if nobody decides they want it. now to get all the parts together and info from my mechanic for his machine shop guy that lives up in sedro and get some money and i'll send it all out to get done up. hoping this is all worth it in the long run. need to get around to figuring out the five speed i got sitting in the back of toolbox too. 

  • Like 2
Link to comment

deception pass, can't wait to get back down to ocean shores again

 

my daughter enjoyed a wonderful day at deception though, even took a canoe out for about half an hour with her, gonna have to do it again

 

 

Thought it looked familiar, spent many a day on that beach :)

  • Like 1
Link to comment

Engine block table base. Sounds pretty cool. Glass top?

that's what I'm thinking. Pressure wash, sandblast, pressure wash maybe a spray of clear or blue rattle can on the thing. Clear down the cylinders and across the mating surface, blue everywhere else if I go that route and find a chunk of glass to cover the mating surface
  • Like 1
Link to comment

Love this little girl. She's been taking me to work and back with no issues since last week. Did another dump run today.

 

20150716_163701.jpg

 

At the weird ass dump that I just don't understand

 

20150716_165643.jpg

 

You go inside this building and throw the trash on the floor. So weird.

 

Will update with average gas mileage over the past 3 or 4 weeks later. Been taking pictures of pump and odometer at every fillup

  • Like 2
Link to comment

got home from hanging out with qtip at griots yesterday and felt like doing a thing, so i did

 

20150717_220912.jpg

 

20150717_220903.jpg

 

20150717_221033.jpg

 

20150717_221125.jpg

 

average gas mileage over the past 1557.3 miles is 22.46. best tank got 23.9mpg worse tank got 20.3mpg. could probably do better with a 32/36 and less of a heavy foot but yaknow....

  • Like 4
Link to comment

^^ also likin the Datslocos baby ! Lil miss representing up in flip flop land !

 

dude i wear my hoodie when i ride. may not be in a datto but still representing. i figured the winshield is staying in for a while and probably won't get replaced so why not just pull the trigger and put it there. still need a blue one to match my wheels, i'm so picky aren't i?

 

I don't know why but that purple hood looks really good on there :)

 

that's what qtip was saying yesterday. it's kinda growing on me actually. will be repainted when the truck gets done but probably not going to be touch until then. had an idea come up for the panel on the bottom side too. qtip mentioned airbrushing it when i get it off to fix the dent in the middle. i already have an idea of what i want under there just need to find a good airbrusher and save up some money for it

  • Like 2
Link to comment
  • 2 weeks later...

I have a reliable vehicle to daily so I ain't been dailying little miss. Try to preserve some life yaknow? Drove her to work today and

20150731_134310.jpg

 

They were either trying to protect the older and smaller or trying to intimidate her but she plays with a bigger truck constantly. Just didn't have time to find him this morning

  • Like 6
Link to comment
  • 3 weeks later...

no real update as i haven't had money to work on her after the charge light came on but i think i just need to replace the battery cables. one of the two has been rubbing on the inner fender and i'm thinking it might've worn through or my battery is bad. hoping it's that simple. made myself broke picking up ducky chan but i got these today

 

20150821_181539.jpg

 

they may end up on little miss at some point in place of the ratsun ones since i don't have the car i want to put them on yet..... but it will show up eventually

  • Like 1
Link to comment
  • 1 month later...

Had a couple extra hours so headed down to hoboland today to play with little miss. Pulled her out, drove around the neighborhood and pulled her back in to put her on jack stands and see about starting the disk brake swap.

 

20150928_165628.jpg

 

And then in the process of getting the drum off this happened

 

20150928_165656.jpg

 

Didn't get the drum off yet... kinda upset about that. Will go back to beat on it with my bfh next chance I get

 

Video later. Had to take one since her engine is still going strong without the alternator working

  • Like 1
Link to comment

had to skip a day due to the dentist fucking up my face but got back to poking around in the shop. not complete, only mocked up

 

20151001_175558.jpg

 

20151001_175626.jpg

 

and now with a couple pairs of rims i know will fit

 

signature:

20151001_180048.jpg

 

and the hippies

 

20151001_180651.jpg

 

IMG_20151001_180954.jpg

 

probably gonna keep my kmcs on there, don't see the rotors or calipers as much but i kinda like it like that. the enkeis are just a little too flashy for me right now

  • Like 3
Link to comment
Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.