Anderson521 Posted August 2, 2016 Report Share Posted August 2, 2016 Man I wish mine looked this good! 2 Quote Link to comment
mrbigtanker Posted August 2, 2016 Report Share Posted August 2, 2016 Wow it's coming alive. 1 Quote Link to comment
Bory Posted August 2, 2016 Author Report Share Posted August 2, 2016 Fitting all the lokar cables on the MSD injection 4 Quote Link to comment
Bory Posted August 2, 2016 Author Report Share Posted August 2, 2016 The lokar gas pedal was tight, but I'm happy on how it came out. 4 Quote Link to comment
The Engine Room Posted August 2, 2016 Report Share Posted August 2, 2016 That Lokar cable put me in a ditch one time. Be really sure that the cable sheath is seated in the nut and that it can't pull out or bind when the engine moves around. I thought I had plenty of slack since the engine was solid mounted to the frame with engine plates but there was enough frame twist that it kinked the jacket around the cable at WOT. 2 Quote Link to comment
Charlie69 Posted August 2, 2016 Report Share Posted August 2, 2016 Looks good Bory. I think this one should be named "El Hoyo de Dinero" The Money Pit! LOL Quote Link to comment
Bory Posted August 2, 2016 Author Report Share Posted August 2, 2016 Haha, ya I got some serious fundage in this thing. 2 Quote Link to comment
mrbigtanker Posted August 3, 2016 Report Share Posted August 3, 2016 Haha, ya I got some serious fundage in this thing. I run them with no issues. The lokar's are very nice stuffed. 1 Quote Link to comment
Bory Posted August 7, 2016 Author Report Share Posted August 7, 2016 These are my cooling ines that sit in the engine bay, they are gonna be redone in aluminum with barb ends 6 Quote Link to comment
Bory Posted August 8, 2016 Author Report Share Posted August 8, 2016 Little too much diameter,so I got rid of the battery tray area, cus I had only 1/2 turning radius 4 Quote Link to comment
mrbigtanker Posted August 8, 2016 Report Share Posted August 8, 2016 You going to mold all those holes up to right. Don't look you will need them. 1 Quote Link to comment
Bory Posted August 8, 2016 Author Report Share Posted August 8, 2016 Ya all the wiring is gonna be under the Fender wells so it will hav all the holes filled 2 Quote Link to comment
Bory Posted August 8, 2016 Author Report Share Posted August 8, 2016 The 4 you see on the fire wall is for the heater and a/c lines 1 Quote Link to comment
Bory Posted August 8, 2016 Author Report Share Posted August 8, 2016 Also made this zipper pattern on the floor board to allow some more turning radius 3 Quote Link to comment
Bory Posted August 8, 2016 Author Report Share Posted August 8, 2016 I was able to stretch it out to this shape, I'll just do strips to fill the gaps, didn't want to shape a whole concave shape without an English wheel. 3 Quote Link to comment
Bory Posted August 8, 2016 Author Report Share Posted August 8, 2016 Wild hair weekend, picked up this 94 Corolla, for skid plate racin at Irwindale 5 Quote Link to comment
Bory Posted August 9, 2016 Author Report Share Posted August 9, 2016 Drivers side, panel modification 3 Quote Link to comment
mrbigtanker Posted August 17, 2016 Report Share Posted August 17, 2016 Hello, you don't get no days off from this site to post stuff. You give me inspiration. Keep it coming. 1 Quote Link to comment
AtomChurch Posted August 17, 2016 Report Share Posted August 17, 2016 Life goes all around! Sometimes I only have time to do what I would like without sharing it. Like replacing wiper blades. But I would like to see more of this as well! 1 Quote Link to comment
Charlie69 Posted August 18, 2016 Report Share Posted August 18, 2016 What happen to the progress Bory? Did you take a nap? LOL 1 Quote Link to comment
Bory Posted August 22, 2016 Author Report Share Posted August 22, 2016 You guys are funny, was waiting on a few parts, And headed over to Nashville for a wedding- but trust me I'm still hitting it hard. That's the just of the time off on this build. Thanks for checking in tho. 1 Quote Link to comment
Bory Posted August 22, 2016 Author Report Share Posted August 22, 2016 got some cool stuff coming up! 3 Quote Link to comment
Charlie69 Posted August 22, 2016 Report Share Posted August 22, 2016 A Bory sighting!!! LOL It is good to take a brake from a build, especially as hard as you have been working on this one. Quote Link to comment
Bory Posted August 23, 2016 Author Report Share Posted August 23, 2016 Thanks C6, No pics yet, cus PB is the worst! Pulled the bed back off last night and installed fill neck, sending unit and fuel pump in the Tanks Inc. fuel tank. Now that all that is done, back apart and it's ready for powder coating. Weird to think that I'm finally sending things for coating. 2 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.