Dat Lurka Posted September 27, 2012 Report Share Posted September 27, 2012 So September has not been a good month for me. First my bike blew up. Then I lost my job. And my phone. Put the last of my money into insurance, tag, and gas. 0$ to my name. Just spent every last penny on my truck so I can have some transportation which leads to job, phone, money. And then this.... I followed directions. I swear I was doing it right. My cam towers were all even and flush. then BAM Cam explodes I fucked up somewhere and I guess there was a .5 mm difference in tower height I wasn't even mad. I looked at it for a second then immediately ran outside to throw up. I literally puked up my frustration. Dear Ratsun. I need a Cam for an L20B. I swear on my life that I will repay you as soon as financially possible. Please message me if you can send me a cam. I have till the 11th to make 125$ or I will have to cancel my insurance and return my tag. My only hopes of getting back on my feet are to get this truck on the road and get back to FL where I have friends and family. God Bless You. Quote Link to comment
MicroMachinery Posted September 27, 2012 Report Share Posted September 27, 2012 Pics no workie. Quote Link to comment
datzenmike Posted September 27, 2012 Report Share Posted September 27, 2012 :lol: He'll stop for an L20B cam.... So the picture isn't showing.... did it snap? Quote Link to comment
Dat Lurka Posted September 27, 2012 Author Report Share Posted September 27, 2012 Well there is TEXT Quote Link to comment
Farmer Posted September 27, 2012 Report Share Posted September 27, 2012 I may have one that ill give to you. I'll have to look tomorrow. But I'm not shipping it for free 2 Quote Link to comment
I'm BLUE Posted September 27, 2012 Report Share Posted September 27, 2012 I don't like this .. Hell ... If you were close and needed L24-L26-L28 stuff I would just donate it to you :pirate: sorry no L20b stuff :( Cam spin free after torqueing ? Quote Link to comment
MicroMachinery Posted September 27, 2012 Report Share Posted September 27, 2012 Well there is TEXT Pics or it didn't happen. Quote Link to comment
Dat Lurka Posted September 27, 2012 Author Report Share Posted September 27, 2012 Pics or it didn't happen. Oh it happened alright. 1 Quote Link to comment
metalmonkey47 Posted September 27, 2012 Report Share Posted September 27, 2012 I may have one that ill give to you. I'll have to look tomorrow. But I'm not shipping it for free If you have one, let me know and I'll pay shipping cost. Shouldn't be much 2 Quote Link to comment
Dat Lurka Posted September 27, 2012 Author Report Share Posted September 27, 2012 You're a true bro. 1 Quote Link to comment
metalmonkey47 Posted September 27, 2012 Report Share Posted September 27, 2012 You're a true bro. Ratsun ftw :thumbup: Just one day when someone's in similar need, pay it forward. Quote Link to comment
Dat Lurka Posted September 27, 2012 Author Report Share Posted September 27, 2012 Ratsun ftw :thumbup: Just one day when someone's in similar need, pay it forward. That's the way I live! I like to think it gives me good Karma. All the horrible things that happen to me are just lessons learned. Quote Link to comment
RedBanner Posted September 27, 2012 Report Share Posted September 27, 2012 Id throw down a few bucks for shippkng if i could use my paypal, its ben down for a month, but im asking around about a cam. Good luck man, ill try and come up with one. Quote Link to comment
Dat Lurka Posted September 27, 2012 Author Report Share Posted September 27, 2012 thank you thank you thank you It's all gonna be ok I'm ok I'm not ok I need a beer Quote Link to comment
HRH Posted September 27, 2012 Report Share Posted September 27, 2012 Where the fuck is riften? I have a shitload of spare 20b cams, but I'm in Spokane. Quote Link to comment
metalmonkey47 Posted September 27, 2012 Report Share Posted September 27, 2012 Where the fuck is riften? I have a shitload of spare 20b cams, but I'm in Spokane. Well sir, he's in SC. Want his addy? I'll send you $$ for shipping Quote Link to comment
Dat Lurka Posted September 27, 2012 Author Report Share Posted September 27, 2012 South Crackolina Not quite NC but a few miles south. Quote Link to comment
HRH Posted September 27, 2012 Report Share Posted September 27, 2012 There's not a single pull and save with a Datsun down there? Shit, a cam out here is about $15. Cheaper than shipping. Quote Link to comment
metalmonkey47 Posted September 27, 2012 Report Share Posted September 27, 2012 May be able to get you an L16 cam. Would work, but power would suck more ass then satan himself Quote Link to comment
jalen Posted September 27, 2012 Report Share Posted September 27, 2012 At first when I saw the threads I thought spam. Now that I realized its not. Good luck and i hope you get everything handled Quote Link to comment
squatches Posted September 27, 2012 Report Share Posted September 27, 2012 i may have one in my parts stash ill look tomorrow if not i have a junk yard down the road from the house that has a few l20s in it. where exactly are you located? Quote Link to comment
Phixius Posted September 27, 2012 Report Share Posted September 27, 2012 I thought riften was in the southeastern province of skyrim... 3 Quote Link to comment
djlotus Posted September 27, 2012 Report Share Posted September 27, 2012 If anything I know I have one in the garage right now so if nobody else can come through it is up for grabs. Quote Link to comment
squatches Posted September 27, 2012 Report Share Posted September 27, 2012 I thought riften was in the southeastern province of skyrim... according to google it is lol Quote Link to comment
Dat Lurka Posted September 27, 2012 Author Report Share Posted September 27, 2012 There's not a single pull and save with a Datsun down there? Shit, a cam out here is about $15. Cheaper than shipping. No sir... They just now opened a "pick-n-pull" in greenville and they dun hav any Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.