mrbigtanker Posted December 24, 2013 Author Report Share Posted December 24, 2013 you must be a better powder :thumbup: :thumbup: :thumbup: :thumbup: mr big just email the motor I dont want the truck You got mail. Quote Link to comment
mrbigtanker Posted December 24, 2013 Author Report Share Posted December 24, 2013 ive done thousands of pulleys and harmonic balancers..never a issue I don't doubt you one bit,but the problem started I am sure is when he cut the front pulley off and welded a crank trigger wheel on it,so it was more then likely out of balance and I am thinking the powder coating just sealed the deal.shit happens. What you can do. Quote Link to comment
Eagle_Adam Posted December 24, 2013 Report Share Posted December 24, 2013 wait for parts from place far far away :rofl: Merry X-mas Mr Big :hug: 1 Quote Link to comment
mrbigtanker Posted December 24, 2013 Author Report Share Posted December 24, 2013 wait for parts from place far far away :rofl: Merry X-mas Mr Big :hug: I am buying myself another gun for christmas since i am sick of waiting. Quote Link to comment
mrbigtanker Posted December 24, 2013 Author Report Share Posted December 24, 2013 Shit i just noticed over 55000 views must be something going on in this thread. :rofl: Quote Link to comment
Eagle_Adam Posted December 24, 2013 Report Share Posted December 24, 2013 I am buying myself another gun for christmas since i am sick of waiting. whatcha getting? Quote Link to comment
Kirden Posted December 24, 2013 Report Share Posted December 24, 2013 We're all waiting impatiently to see your tuning guy get that 150hp out of the FJ and hear it out and about. I think it's funny that some people thought your numbers were low. IMO if you wanted huge number you would have went turbo from the begining or some SR/CA/blah swap, but what you ended up with is a beautiful, rare, engine that makes your truck very unique. However, I only visit cause I'm jealous that you and jrock have roof racks... 1 Quote Link to comment
mrbigtanker Posted December 25, 2013 Author Report Share Posted December 25, 2013 whatcha getting? whatcha getting? I don't quite now,maybe a 338 lapua.Barrett or a Nemo 300wind mag,but shit dude there big bucks. Quote Link to comment
mrbigtanker Posted December 25, 2013 Author Report Share Posted December 25, 2013 We're all waiting impatiently to see your tuning guy get that 150hp out of the FJ and hear it out and about. I think it's funny that some people thought your numbers were low. IMO if you wanted huge number you would have went turbo from the begining or some SR/CA/blah swap, but what you ended up with is a beautiful, rare, engine that makes your truck very unique. However, I only visit cause I'm jealous that you and jrock have roof racks... And thanks for the kind words,horse power is easy to make in my opinion,I did it more for a cool factor. 1 Quote Link to comment
mrbigtanker Posted December 25, 2013 Author Report Share Posted December 25, 2013 You know Adam I was thinking the Barrett is the 98b what the fuck I need it for I don't know,but check out the NEMO omen 300 mag bitching gun out of Montana but there about the same price I can get a price break but there in the ballpark of about 5200-5500.00 depending how you let's say go N/A or forced induction. Quote Link to comment
mrbigtanker Posted December 25, 2013 Author Report Share Posted December 25, 2013 Motivation to get my ass in school and start making some real money. saw a clean little 1200 in the parking lot yesterday when i went to go sign up for classes, got me excited Just so we can see it again in slow motion.lol 1 Quote Link to comment
skyblue Posted December 25, 2013 Report Share Posted December 25, 2013 Blah blah blah datsun. Quote Link to comment
mrbigtanker Posted December 25, 2013 Author Report Share Posted December 25, 2013 Blah blah blah datsun. WOW,i cant believe you said that.i will never get over that. Im over it.lol Quote Link to comment
datsunfreak Posted December 25, 2013 Report Share Posted December 25, 2013 the problem started I am sure is when he cut the front pulley off and welded a crank trigger wheel on it Seems like this would put way more heat into the rubber than powdercoating would? 1 Quote Link to comment
Busta Nut Posted December 25, 2013 Report Share Posted December 25, 2013 but shit dude there big bucks. Like that F'n matters......... .......just show us a picture of yours already..... Maybe even a video of some shit getting full of lead :devil: 2 Quote Link to comment
mrbigtanker Posted December 26, 2013 Author Report Share Posted December 26, 2013 you are to funny,it is big bucks,hard t hide that much money from the wife. 1 Quote Link to comment
skyblue Posted December 26, 2013 Report Share Posted December 26, 2013 Give us something. Quote Link to comment
Ranman72 Posted December 26, 2013 Report Share Posted December 26, 2013 you are to funny,it is big bucks,hard t hide that much money from the wife. buy her one too 1 Quote Link to comment
jrock4224 Posted December 26, 2013 Report Share Posted December 26, 2013 Powdercoating had nothing to do with your problems Quote Link to comment
thisismatt Posted December 26, 2013 Report Share Posted December 26, 2013 Powdercoating killed my father 1 Quote Link to comment
mrbigtanker Posted December 26, 2013 Author Report Share Posted December 26, 2013 Powdercoating had nothing to do with your problems Well i know you do it for a living but i beg to differ.But i really think the crank trigger wheel really caused it to fuck up,pretty sure it was not balanced.And i will say i will not get a balancer powdered coated again. 1 Quote Link to comment
jrock4224 Posted December 26, 2013 Report Share Posted December 26, 2013 right again you answered your question then blamed some irrelevant occurance .... it makes no sense ...... Quote Link to comment
mrbigtanker Posted December 26, 2013 Author Report Share Posted December 26, 2013 what makes no sense,the powder coating part or the crank trigger. Quote Link to comment
jrock4224 Posted December 26, 2013 Report Share Posted December 26, 2013 the its not the powder, but it is the powder when its not even the powder...your adding rotating mass and welding it so theres no real way to ensure your balancing the pulley to begin with , unless u had it balanced after that ...... Quote Link to comment
mrbigtanker Posted December 26, 2013 Author Report Share Posted December 26, 2013 No i did not even do the hack job to begin with,and as for the powder coating i am thinking that the heat sealed the deal[maybe].But i got a new one coming so the old ones goes in to the trash. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.