sick620 Posted July 30, 2011 Author Report Share Posted July 30, 2011 you make it back? i wanna see this... ?? The trucks sitting In front of my house go check it out :) .... it took the 2 hour drive like a champ :).... Quote Link to comment
sick620 Posted July 30, 2011 Author Report Share Posted July 30, 2011 Plans for now.... New seats. Grant steering wheel( free from the same junk yard) New mirrors (already on) Have an almost mint dash and tach for it New tires(all four are miss matched) Need to clean up the center console and re install it Paint wheels, grill, and some other crap.. More wax :) Gotta pop those ugly dents out And...... Moarr lowwwwrrr (farmer joe? ;) ) Quote Link to comment
sick620 Posted July 30, 2011 Author Report Share Posted July 30, 2011 Right before the 2 hour drive.... damn datsuns rock, it sat for 7 years... in a junk yard... and I just put water in it, and oil changed it, than drove it 150 miles.. I love you nissan :) Quote Link to comment
sick620 Posted August 2, 2011 Author Report Share Posted August 2, 2011 well I got some honda accord seats for it, Got an adapter for the grant steering wheel. Got some stock wheels with good tires. im going to get some energy when it cools off this evening and im going to work on it.... Quote Link to comment
Wide14u Posted August 3, 2011 Report Share Posted August 3, 2011 it does look good Quote Link to comment
Farmer Posted August 3, 2011 Report Share Posted August 3, 2011 Now that is a great find. Looks really clean. Larry Quote Link to comment
Farmer Joe Posted August 4, 2011 Report Share Posted August 4, 2011 take a toilet plunger to the front fenders to pull the dents... youve shined it up enough now for that to work.. ive got a 3in set of blocks.. your old ones if i remember correctly... it still need a tranny? im gonna be pullin mine to replace it, but its prolly a rebuilder.. Quote Link to comment
sick620 Posted August 4, 2011 Author Report Share Posted August 4, 2011 farmer joe is there u bolts to them blocks? ive already done the fenders... just waiting to get more progress before i post... :) Yes I want the tranny.... not for the blue truck but for the red one, Im going to use the longbeds tranny in the blue one... what do you want for it and them blocks? Quote Link to comment
fivetenguy Posted August 5, 2011 Report Share Posted August 5, 2011 Great find! I love this truck. It has sooooo much potential. Quote Link to comment
Farmer Joe Posted August 5, 2011 Report Share Posted August 5, 2011 mkay... i can swing it by one day after work when i get the shit out... it should be rebuildable... i needs new bearings.. well talk in person about that.. you need to buy some u bolts my friend... put those chrome wheels i gave ya on it... those would look good with the right size tire... Quote Link to comment
sick620 Posted August 9, 2011 Author Report Share Posted August 9, 2011 so far ive.... Installed grant wheel. repainted back bumper, tail light housings, and grill. (silver) replaced shitty motorola am fm with delete plate... hit the dents out of fenders as good as I could. painted the frame flat black Pictures of all of that tomorrow..... ... still alot to do going to get to work tomorrow... Quote Link to comment
sick620 Posted August 9, 2011 Author Report Share Posted August 9, 2011 scored 2 6in speakers at a garage sale ( $1 a piece) and they're blueish Going to make some wood adapters and install them... Quote Link to comment
sick620 Posted August 9, 2011 Author Report Share Posted August 9, 2011 And a teaser of what im working on tonight..... all about the details haha ;) Quote Link to comment
sick620 Posted August 9, 2011 Author Report Share Posted August 9, 2011 teaser 2 Quote Link to comment
sick620 Posted August 10, 2011 Author Report Share Posted August 10, 2011 Where the 620 currently sits.... Its so hot out ive only been motivated to work on her in the mornings and evenings.... I hope to get it in the garage soon so more progress can get done :) Haha redneck owned I assume :) fenders looking alot better :cool: still could use a little work from someone who has the right touch Painted grill going to install a datsun badge when I get one cleaned up.... been working on cleaning up the dash area new wheel, dash carpet, delete plate, etc... Quote Link to comment
sick620 Posted August 10, 2011 Author Report Share Posted August 10, 2011 another grill pic painted the back bumper and tail light housings I NEED YOUR HELP I dont like my bumper because its bent. BUT it says this on it ^^ I was even born in twin falls idaho.... Should I keep the cool but ugly bumper?... Cleaned out the nasty ass junk yard bed... found some surface rust going to clean up the metal and spot treat it soon Frame painted flat black scored some sweet swag, need to install soon.... Also need to stick my deluxe emblems back on trucks cleaning up slowly but surely Quote Link to comment
sick620 Posted August 10, 2011 Author Report Share Posted August 10, 2011 moar lower coming soon, How low should I go? just some 3 in blocks? what do you think? also if I keep stock wheels what color should I do? silver? should I pull off the cool but ugly stock bumper? Quote Link to comment
justin 620 Posted August 10, 2011 Report Share Posted August 10, 2011 3inch in back, maybe a lil more in the front. And paint the wheels that blue!! with the dishes all polished up, it would look sick an half. Pull the bumper an hang it somewhere, haha :D Quote Link to comment
yello620 Posted August 10, 2011 Report Share Posted August 10, 2011 Pull the bumper, Dont color match the wheels to the body(looks terrible), and 3" blocks are a good starting point. Quote Link to comment
Jester Posted August 10, 2011 Report Share Posted August 10, 2011 My opinion......lower it the 3" and loose the bumper. As for the wheels, I would paint them a light cream or off white. Would look sick with the white walls. I agree with Yello, definitely not color matched. Quote Link to comment
Rhapakatui Posted August 11, 2011 Report Share Posted August 11, 2011 I've got one of those bumpers that had Beaumont TX on it. I'm thinking about cutting out the stamped part and making a roll pan out of it. Just an idea I'm throwing around. Nice truck.. Quote Link to comment
Wide14u Posted August 12, 2011 Report Share Posted August 12, 2011 I've got one of those bumpers that had Beaumont TX on it. I'm thinking about cutting out the stamped part and making a roll pan out of it. Just an idea I'm throwing around. Nice truck.. i think his is just a sticker but that is a great idea for a stamped one Quote Link to comment
sick620 Posted October 12, 2011 Author Report Share Posted October 12, 2011 Update: as you know if you have payed attention to this thread I got the truck from the junkyard. Well guess what the title finally fawcking cleared. Its on its way soon :D now im motivated to work on this turd :cool: Just got a l20B for it. :) Quote Link to comment
]2eDeYe Posted October 12, 2011 Report Share Posted October 12, 2011 Congrats :thumbup: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.