the510keeper Posted November 12, 2010 Report Share Posted November 12, 2010 Hey Ratsuners, Victory and I wanted to bumrush a 2 door 510 for the BBQ get together this last weekend, so here is the story. We bought this car a few months ago in San Rafael. The owner before us did alot of work to the car, but the car still needs a lot of work. The engine bay was mostly stripped, the inner fender wells were stitch welded from the under side instead of the inside of the engine bay. Battery tray was removed, but not smoothed out, and count less holes were already welded close. Now that the rains are here I knew it would just sit and rust. Victory was excited to do some sandblasting. 500 pounds of sand and a raw canvas later we had something to work with. Bare metal looks pretty Quote Link to comment
fisch Posted November 12, 2010 Report Share Posted November 12, 2010 Another bit of awesomness from you guys! Can't wait to see where it goes! Quote Link to comment
the510keeper Posted November 12, 2010 Author Report Share Posted November 12, 2010 Victory got her hands dirty on this one. Grinding and some filler work. Yes this is a nice pic Filler work DP40LF, this is a great epoxy primer, and works well when you do not want to sand the entire area again. You can spray over this primer without sanding for 7 days. I don't wait that long but a day or 2 is great. I sand the DP with 320 dry to eliminate sand scratches from the filler work. BANG Here you have it a painted engine bay in less then a week I sprayed the base then added red metal flake and 3 coats of clear. The red is a color i will be painting a 2 tone on a wagon with and wanted to see it sprayed. Now maybe someone will see potential and buy this lost pup and put him back on the road. Quote Link to comment
fisch Posted November 16, 2010 Report Share Posted November 16, 2010 Man wouldn't this look swell in there! I wish you guys were closer! Quote Link to comment
the510keeper Posted November 17, 2010 Author Report Share Posted November 17, 2010 that valve cover is sweet, very nice Quote Link to comment
dennis Posted November 17, 2010 Report Share Posted November 17, 2010 nice color choice, I bet you cant hide any flaws with that color. Quote Link to comment
WAGON JON Posted November 18, 2010 Report Share Posted November 18, 2010 So, after all that work, are you gonna make it run? Quote Link to comment
the510keeper Posted November 18, 2010 Author Report Share Posted November 18, 2010 So, after all that work, are you gonna make it run? We don't make things run we just make things pretty to look at. Quote Link to comment
WAGON JON Posted November 19, 2010 Report Share Posted November 19, 2010 We don't make things run we just make things pretty to look at. Yeah I know how you do.... Quote Link to comment
victory Posted November 22, 2010 Report Share Posted November 22, 2010 Well we can't seem to get enough of these Datsuns, especially with really nice paint ideas in mind. The work must come before the paint. Here are some pic of where we are with this one. Quote Link to comment
68Datsun510 Posted November 22, 2010 Report Share Posted November 22, 2010 So how hard would it be to clean up and seal this??? My schedules all jacked up right now due to turkey day. Maybe the week after you can come get the 68??? For you guys, its definitely project worthy. Ill keep in touch. By the way, way to go Vicky! I had no clue how involved she was in the 510 'process'!!!! Quote Link to comment
cosmo Posted November 22, 2010 Report Share Posted November 22, 2010 haha this will be a sick 510. i need to get rid of one of my 521's and get a dime! Quote Link to comment
Icehouse Posted November 22, 2010 Report Share Posted November 22, 2010 OOOOOOOOOWWWWWWWWWW Dude you guys are amazing!!! Quote Link to comment
WAGON JON Posted November 22, 2010 Report Share Posted November 22, 2010 Does the dust in the air in hanse any features? Quote Link to comment
the510keeper Posted November 23, 2010 Author Report Share Posted November 23, 2010 Yes Cody we can take care of that ding, no biggy I sometimes think about leaving a car alone, then Victory comes along a says "hey this would look nice done and painted, I'll help" and off we go. It's like a drug, but it's very cool when you see something on the road that could of been in a scraper. Quote Link to comment
DISLEXICDIME Posted November 23, 2010 Report Share Posted November 23, 2010 some one stole your vents :lol: Quote Link to comment
xvi00 Posted November 23, 2010 Report Share Posted November 23, 2010 Hey the 510keeper great work mate well done wish I lived nearby I would spend my weekends at yours and help you and vicktory built some serious datto's. Quote Link to comment
the510keeper Posted November 23, 2010 Author Report Share Posted November 23, 2010 Hey the 510keeper great work mate well done wish I lived nearby I would spend my weekends at yours and help you and vicktory built some serious datto's. Thanks, Datsun folks are always welcomed. Pillar vent were shaved, thought about cutting them back open, but there are other things shaved also, all done by previous owner and all done well, so we decided to leave it Quote Link to comment
NICKLE&DIME Posted November 25, 2010 Report Share Posted November 25, 2010 Are you going to fix the sunroof? Quote Link to comment
the510keeper Posted November 26, 2010 Author Report Share Posted November 26, 2010 Are you going to fix the sunroof? don't know yet, still thinking about reskinning it Quote Link to comment
WAGON JON Posted November 26, 2010 Report Share Posted November 26, 2010 "My name is Bondo, James Bondo" I like it shaken not stirred. Oh, what is that Miss Penny Money?-need more pictures? Ok, I'll get right on it! Quote Link to comment
the510keeper Posted November 27, 2010 Author Report Share Posted November 27, 2010 Jon is my friend, be in be in be in, more pics to cum Quote Link to comment
WAGON JON Posted November 28, 2010 Report Share Posted November 28, 2010 Jon is my friend, be in be in be in, more pics to cum Yeah, well we are all waiting....? Quote Link to comment
the510keeper Posted November 29, 2010 Author Report Share Posted November 29, 2010 Update So Victory just wants to see this car done, WOW. OK So that means alot of work for both of us. However we are not attempting to take a year or create a $5000 paint job. Something clean and enjoyable. On with random parts, hood next, here is what we started with. Ugly rusty, but very straight. Check out Atom airline off with his prop Using lacquer thinner and a scotch bright to finish off all the crevices. Truck lid time, Vic cleaning the underside after sanding with 320 on a DA sander Using a dent puller to shrink low spots, from somebody's big ass sitting on the truck lid sometime long ago. Spread the mud Sand lots of sanding, most all filler gets hand sanded, along with most primer, actually most the sanding i do is by hand. Unless it doesn't have to be perfect. On with the primer filler Quote Link to comment
the510keeper Posted December 14, 2010 Author Report Share Posted December 14, 2010 So new news, Tiki has taken another 510 off our hands. We have to make it somewhat good for exterior conditions. We will be spraying it low sheen black and finishing the interior of the hood and trunk lid. When you open the hood, all u will c is pretty, sleeper. Painted and ready to mount Victory has been sanding the shell getting it ready for BLACK Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.