Blknight692 Posted September 30, 2010 Report Share Posted September 30, 2010 On the ride home yesterday my temp started climbing again. It hit about 220 or so before I had a chance to pull it over and let her sit for a bit. I'm at a complete loss now on what to do. Heres the laundry list of things I've done to it just about a month ago. Replaced thermostat, thermostat housing, upper and lower hoses, radiator cap and water pump. I don't have any water in my oil and or oil in my water so I don't know if its my head or not. Whats next? New radiator? Hahahaha, try and find one. Anybody have anything? Quote Link to comment
izzo Posted September 30, 2010 Report Share Posted September 30, 2010 did you flush the system out when you changed all this? are any of the lines crimped off? Quote Link to comment
Blknight692 Posted September 30, 2010 Author Report Share Posted September 30, 2010 I flushed everything with the hose when it was all open and it looked good. The only thing that was a little slow was the radiator. Filled it up, let it bubble for a few minutes, top it off, wait, top it off one more time and it was good. Should I take the radiator and have it boiled out? I need this truck as its my daily driver, but can't have it blow up on me either. Quote Link to comment
wayno Posted September 30, 2010 Report Share Posted September 30, 2010 If the radiator was out and you stuck the garden hose in th top, turn it on full blast, plug the upper hose outlet with your hand, the water should come out the bottom as fast as it is going in the top, period. wayno Quote Link to comment
Blknight692 Posted September 30, 2010 Author Report Share Posted September 30, 2010 Nope, it backed up when I flushed it. It was going through , but no where near what I was putting in. What options do I have then for the radiator? Is there a flush or do I take it out and have it boiled out? I've never done either. Quote Link to comment
420n620 Posted October 1, 2010 Report Share Posted October 1, 2010 if you're using straight water then thats prob you're prob, water has a lower boiling temp then antifreeze. When you installed a new thermostat, did it have a weep hole in it, if not then take it off and drill a 1/16" hole in it, this will allow all the air out of the block and keep from getting an air lock in the block when you put 50/50 antifreeze in the radiator. Quote Link to comment
MikeRL411 Posted October 1, 2010 Report Share Posted October 1, 2010 Sounds like a plugged up radiator core. By the way, to really be complete when back flushing the engine and radiator you really should locate the engine block drain plug, remove it and flush like crazy. You will most likely find a thick film of crud blocking the entry point to the block so may have to tap it out with a screwdriver before being able the flush the block. Installing a flushing Tee [Prestone makes a good one] in the heater line makes this simpler. Quote Link to comment
wayno Posted October 1, 2010 Report Share Posted October 1, 2010 There is a point when it's hot(warm weather), when a radiator that is pluged up won't cool the engine anymore, that is when you have it cleaned professionaly or have it recored. It's not worth ruining an engine by getting it super hot over and over. One day one might say to ones self, it's only one more mile. wayno Quote Link to comment
Blknight692 Posted October 1, 2010 Author Report Share Posted October 1, 2010 I'm running 50/50 in it. It got hot again on the way to work with the nice cool morning air so I know I'm in trouble this afternoon. Looks like I will be making a nature stop on the way home for a little bit. Will drain it and pull it this weekend and see what my options are. Thanks everybody. Quote Link to comment
Pacific coast Datsun Posted October 1, 2010 Report Share Posted October 1, 2010 Take the radiator to a shop & have it rodded out. & like the guys said flush the engine while its out to remove any & all crap. Quote Link to comment
banzai510(hainz) Posted October 1, 2010 Report Share Posted October 1, 2010 being cheap will kill this motor. Make sure the rad has flow!!!!!!!!!510 rads are the same if somebody near you has a good one Quote Link to comment
mike Posted October 1, 2010 Report Share Posted October 1, 2010 If you can find a good 620 rad take that and your 521 rad to a shop and have them swap the lower outlet so that it will still fit in your truck. Look for one out of a 76 and up 620 and make sure its a 3 core. It should bolt in with little to no modification. Snag the overflow tank and stuff too if you get one from a yard. I was quoted 40 bucks to swap the lower outlet here in town with out a good buddy deal or anything so it shouldnt cost too much where youre at... could be cheaper. Quote Link to comment
Blknight692 Posted October 1, 2010 Author Report Share Posted October 1, 2010 Has anybody tried taking the rad out, capping the end and pouring CLR in it? Anybody have a clue what the core is made out of? Copper or Aluminium? I'm trying to buy me some time to get money to fix it right before I blow my engine up. Quote Link to comment
bonvo Posted October 4, 2010 Report Share Posted October 4, 2010 if its the stock radiator it should be copper/brass construction if your trying to by time i would do this borrow a pressure washer from a friend or rent one and cap off the upper hose outlet and just blast away if possible hook it up to hot water and mix in a degreaser in the area for detergent or plan b get some cans of brake clean and spray them in there then slosh them around (rad cap in place and inlet/outlet facing up) make sure you give it a day to evaporate completely before you try putting it back together when you get some cash together you can replace the radiator with one out of a vw rabbit or v6 feiro these are popular 510 swaps i dont see why they wont work in a 521 they may be a tad wide for the headlight recesses though Quote Link to comment
dat521gatherer Posted October 4, 2010 Report Share Posted October 4, 2010 I've seen a lot of new thermostats stick. when the temp goes up tap on the thermostat housing lightly with a hammer. If the temp drops way down right away then you know it's the thermostat. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.