q-tip Posted May 14, 2013 Report Share Posted May 14, 2013 I would test the alternator.... Quote Link to comment
Tristin Posted May 14, 2013 Report Share Posted May 14, 2013 I should test my own alternator.... Quote Link to comment
q-tip Posted May 14, 2013 Report Share Posted May 14, 2013 It charges just fine, its whatever the hell else it does that is a problem. :lol: Quote Link to comment
akawes Posted May 15, 2013 Report Share Posted May 15, 2013 I went to a local pull and pay and found a 3.9 viscious lsd off of a 91 legacy turbo. Quote Link to comment
akawes Posted May 15, 2013 Report Share Posted May 15, 2013 It'll definitely come in handy later on in my cars life. I'm gunna go the KA route with her. Quote Link to comment
DatMo Posted May 15, 2013 Report Share Posted May 15, 2013 well i bought a quick release form a friend for super cheap. trying to get some 280zx struts. and saving up to get a nrg hub lock that SHOULD fit onto my momo hub adapter form what I've been told/read. hopefully at least. or ill cry. . anyone drive with a momo hub adapter? does the wheel come out too far? Quote Link to comment
DatMo Posted May 15, 2013 Report Share Posted May 15, 2013 oh. and i replaced the battery attachments. I'm not sure what they're called? the plugs onto the battery. Quote Link to comment
q-tip Posted May 15, 2013 Report Share Posted May 15, 2013 I had a grant on my dime, about the same offset as the momo, it want too bad for me but I gave the seat all the way back and with some lean to it so I can actually drive the car Quote Link to comment
danfiveten Posted May 15, 2013 Report Share Posted May 15, 2013 Went through all the stuff i got with the blue car. Art had kept everything for that car, even a big folder of gas receipts...Just amazing. I got to much to go through LOL. Quote Link to comment
DISLEXICDIME Posted May 15, 2013 Report Share Posted May 15, 2013 oh. and i replaced the battery attachments. I'm not sure what they're called? the plugs onto the battery. I think phillcas1987 has a momo on a quick release for sale . Pm him Quote Link to comment
DatMo Posted May 16, 2013 Report Share Posted May 16, 2013 i have a qr and wheel already. Quote Link to comment
dattoboy70 Posted May 16, 2013 Report Share Posted May 16, 2013 So today i went into my garage and looked at my dime thats all i did. i was supposed to go out to a car meet tonight but its finals week and because of that its been since Sunday that Ive driven my 510 :crying: . Quote Link to comment
hang_510 Posted May 16, 2013 Report Share Posted May 16, 2013 replaced the front windshield and the rear seal. lets see if the new DLSC seals are all that they should be. redid the rear axle nuts, now @ the proper torque. made a big difference. still has a klunk... almost ready for a road trip to Canby! Quote Link to comment
dattoboy70 Posted May 16, 2013 Report Share Posted May 16, 2013 ^thats going to be a fun drive. i wish i could go im sure my 510 would make it. Quote Link to comment
DatMo Posted May 16, 2013 Report Share Posted May 16, 2013 what are the differences in seals? there`s like cali look or something? Quote Link to comment
q-tip Posted May 16, 2013 Report Share Posted May 16, 2013 The Cali look doesn't take the trim that's around the window Quote Link to comment
edekalil Posted May 18, 2013 Report Share Posted May 18, 2013 Found a couple of dash gage setups. One with white neddels One with red neddels Eddie Quote Link to comment
freekwonder Posted May 19, 2013 Report Share Posted May 19, 2013 Fixed my losse top hats, so front suspension isn't as noisy, and removed the little cover off the heater box since it vibrated, made a lot of noise and I'll never use the heater. Also discovered this. Don't suppose anybody has some retaining pins, clips and brake pads for the rear calipers of a 79-81 280zx? Quote Link to comment
Rollover_Red Posted May 19, 2013 Report Share Posted May 19, 2013 pulled my motor and trans to get ready for the lz22. 1 Quote Link to comment
DatMo Posted May 19, 2013 Report Share Posted May 19, 2013 tried to put the momo nrg thin quick release and nrg wooden steering wheel together but failed. anyone done this? Quote Link to comment
q-tip Posted May 19, 2013 Report Share Posted May 19, 2013 Hub on steering shaft, tighten nut in shaft. Bolt qr to mono hub then steering wheel to qr 1 Quote Link to comment
Rollover_Red Posted May 19, 2013 Report Share Posted May 19, 2013 tried to put the momo nrg thin quick release and nrg wooden steering wheel together but failed. anyone done this? just get the "boss" hub on ebay, works amazingly. then just slap a quick release on top of it. Quote Link to comment
DatMo Posted May 19, 2013 Report Share Posted May 19, 2013 Hub on steering shaft, tighten nut in shaft. Bolt qr to mono hub then steering wheel to qr I really did that but none of the bolts are long enough from the steering wheel to attach to the second part of the qr. lol. not only that, the qr should be universal but even that on the momo hub isn't working too well. just get the "boss" hub on ebay, works amazingly. then just slap a quick release on top of it. I was thinking about it last night but I already have the hub wheel and qr so why not try to make em work? if it truly does fail in the end, I prob will. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.