71DIMER

Thanks guys. Yeah I'm not looking to split them so if someone just wants 2 they have to buy all 4 then sell the other pair off themselves or come with the buyer for the other pair.

Four (4) Panasport wheels (with center caps) with mounted/balance tires (all 4 tires are barely worn, lots of thread depth left, see pics below for condition) Bolt Pattern 4x114.3 (4" x 4.5") (2) are 15x7 with 205/50R15 Cooper Cobra GT tires (2) are 16x7 with 225/50R16 Cooper Cobra GT tires Came off a 240Z Will be sold as a set of 4, not selling off as pairs unless you line up a buyer for the other 2 wheels. PRICE: $700 Not parting them out, if you only want a specific pair you have to buy all 4 then you can resell the other 2. LOCATION: Sunnyvale, CA 94086

Well sounds like there's more guys from San Jose than out here and Ben's in Milpitas so why not meet at McCarthy Ranch near the In-N-Out and then hit 880N on the way to meet up Clay in Fremont and head on from there? I say let's plan on meeting there at 9:15am ish.

I really really like those VW wooden slat roof racks BUT the only thing is that if you put one of those on a Datsun it will look funny sitting so high. VW's have a more pronounced 'bubble' roof than our more squared off Datsun roofs, so it wouln't need to be so high to clear our roofs. Oh and not to mention that they're expensive. Even well used and beat up they sell for at least $150 and up.

Here's a old aftermarket roof rack I have that was on a 1200

Yeah that grill has been on craigslist for a while, still at $500. He'll be holding onto that one for a while at that price, especially now with people having less jobs/money to toss at 510s.

I'll be PMing those that I know are interested in going from down here in the Southbay to organize a rolling thunder picking up more ratsun guys along the way up. If you're interested in going and want to roll up PM me or just post that you're going. I'll be taking soda (cans) and something to grill. :) Those that I'll be PMing to set up a place to meet or to meet up on the way there so far include: thatsoon510 69FJWagon BoostinBen N0RCALDIME datlove zhiguli510 GUS-GUS pl521sss and a few others that don't frequent/post in here.

PM'ed you both. I still have plenty of them :).

Hey Greg, here's a pic I found online, not the best but you basically install all 4 corner brackets then the flat mat in the middle is anchored to each of the 4 corner bases. The 'flat slat mat' has a metal piece that goes left to right and the ends have notched ends, if I remember correctly they are what are held onto the sides of the 4 corner bases. Sorry for the poor description but that's how I remember taking that sucker apart. You gonna post pics of your fancy 68 yet? I took some pics of it while Aaron was monkeying around with it at Cameron's place. Oh and FYI you owe me a new old rag that I had to let Aaron have since he was getting dirty on it. :lol:

Bluebird Coupe Tail Light emblem Bluebird Coupe Supersonic side square emblem C-Pillar Vent SSS Emblems Just need to paint them so it'll look like the 2nd pic below.

You should PM PL521SSS, he has one of those NIB NOS locking gas cap too and I don't think he's asking $200+ for it. Or you can PM 69FJWagon (Clayton) since he also has a 1969 510 Wagon to ask him what he's using and if can tell you anything about any aftermarket gas filler caps. Good luck.

Will do Ben. Norcaldime & Dimelover (and anyone down here in the SouthBay) hit me up with a PM and let me know if you guys want to meet at my place in Sunnyvale then head on over to Fremont to gather with anyone else.

Do you need the whole assemblies or just the lenses/trim?

C'mon Skib surely you have something to trade me for a kit? :P I didnt know you just needed a front.

What the what? Is there a sudden surge of for sale 1968 wagons? Nice ride for sure...what are your plans for it? Oh and I really like that indoor/outdoor green turf carpet going on in there! :cool:

Yeah you might want to post pics of the engine goodies incase they do strip it and try to sell off parts. Makes me want to engrave all the parts in my 510 after reading this. I had a set of 14" wheels stolen out of my back seat of my 510 a few weeks ago. The only good thing was they didn't mess up my locks or break my windows getting to them. Damn dirty thieves!

Doh! Oh well...didn't think of that. Sorry Ben, hope you can still find it.

Here's his thread where he shows what he had made: http://www.the510realm.com/viewtopic.php?f=27&t=10313&hilit=whitebird

There's a guy on the realm that can probably help you. I forget his handle but if you do a search for WHITEBIRD you'll find him. He had custom fender emblems made that said well "WHITEBIRD" for his white JDM 510. He may have the font he used or knows what it's called.

So is it a done deal with AZhitman? I noticed he lists a 68 510 on his signature on the realm. :P If so, man that little 68's getting tired of the back and forth between CA and AZ, it says just pick a state will ya! :lol:

What? Aren't you going to roll over there? Man you've been MIA on here! Give me a call when you can.

Funny when I read 'little red wagon' I thought of this! You have a great start there, looks to be nice and clean, especially that interior!

Sounds good to me, I'll start gathering the guys who'll make it from down here and get back to you amigo.

Hey nice to see another 68 goon on here! Congrats on the score and welcome to Ratsun. Oh and btw, incase you haven't figured it out yet, we all LOVE (read: NEED) pictures, as mundane as they may be, the more pics the better around here!!! I vote for a resto but keeping it stock. Check out my 1968 wagon here: http://community.ratsun.net/topic/8106-i-also-scored-a-510-wagon

They're revolution wheels...if you get them looking like this (below) they'd probably be worth $5 so let me know if you want to get rid of them :P Haha j/k, good score buddy!