datrod Posted December 28, 2008 Report Share Posted December 28, 2008 Yes - This year I won my Division & the June Sprints at Road America. I finished second at the Runoffs.:mad: I missed the tripple crown by 5 seconds! Good year though! Wow That's fantastic. What do you drive? Quote Link to comment
Bob3 Posted December 28, 2008 Author Report Share Posted December 28, 2008 Wow That's fantastic. What do you drive? Honda S2000 in T3 (Touring 3) [/img] [/img] [/img] Quote Link to comment
thisismatt Posted December 29, 2008 Report Share Posted December 29, 2008 My poor tiny workspace: Quote Link to comment
Icehouse Posted December 29, 2008 Report Share Posted December 29, 2008 My poor tiny workspace: At least you have a work space, Frank is nice enough to let me work on my rigs at his place, which is actually really small for just what he does. Besides that I build most my parts at work. Hopefully I don't loose my job anytime soon :confused: haha :D Quote Link to comment
lynchfourtwenty Posted December 29, 2008 Report Share Posted December 29, 2008 yea, i gotta find a local place to do my sr20ve swap on my se-r soon :( Quote Link to comment
thisismatt Posted December 29, 2008 Report Share Posted December 29, 2008 At least you have a work space, Frank is nice enough to let me work on my rigs at his place, which is actually really small for just what he does. Besides that I build most my parts at work. Hopefully I don't loose my job anytime soon :confused: haha :DYeah...I suppose. I poured the slab myself and ran the ghetto electrical. That pic pretty much shows it all, though. There's only about 18" from the door to the rotisserie that you can't see. Quote Link to comment
datrod Posted December 29, 2008 Report Share Posted December 29, 2008 honda s2000 in t3 (touring 3) [/img] [/img] [/img] nice. :D Quote Link to comment
slodat Posted December 29, 2008 Report Share Posted December 29, 2008 Hey Matt, I bet you will have a very nice finished product, despite the cramped working conditions. I have finally (well in a couple days) got my dream shop. It's as much as I will ever really need. **want** is another story. I currently rent two bays of an 8 bay wide shop. I have 24x20. On Wednesday, I get two more bays adjacent to mine. So, I'll have 24x40 with a wall splitting it in half. I can't wait. I'll have room to slowly work on my 521 chop project AND my two daily rigs (510 & 620KC) at the same time. Quote Link to comment
Icehouse Posted December 29, 2008 Report Share Posted December 29, 2008 Hey Matt, I bet you will have a very nice finished product, despite the cramped working conditions. I have finally (well in a couple days) got my dream shop. It's as much as I will ever really need. **want** is another story. I currently rent two bays of an 8 bay wide shop. I have 24x20. On Wednesday, I get two more bays adjacent to mine. So, I'll have 24x40 with a wall splitting it in half. I can't wait. I'll have room to slowly work on my 521 chop project AND my two daily rigs (510 & 620KC) at the same time. That will be awesome! When I rented a big shop I loved being able to lay everything out on the floor, ton's of room for mock ups. I could leave it there as long as I wanted, maybe one day I will have another one :D Quote Link to comment
mklotz70 Posted December 29, 2008 Report Share Posted December 29, 2008 Bob......I've got the Uhaul reserved and I've started packing the boxes.....I figure it's first come, first adopted!!! :) I'll be there by monday!!! ....sorry Driven(was going to move up there)....I see a heater in Bob's place!! :) Quote Link to comment
mklotz70 Posted December 29, 2008 Report Share Posted December 29, 2008 oh wait....tomorrow is my friday, but actually monday....I guess it will be more like wednesday! :) Quote Link to comment
qwik510 Posted December 29, 2008 Report Share Posted December 29, 2008 I wish I had a nice workshop like some of you. Here is my space: I work half inside and half out. I roll the car out into the driveway when I need more space. It makes winter work fun. LOL! If I could get rid of some junk, I would have alot more space. Quote Link to comment
Bob3 Posted December 29, 2008 Author Report Share Posted December 29, 2008 Bob......I've got the Uhaul reserved and I've started packing the boxes.....I figure it's first come, first adopted!!! I'll be there by monday!!! Sounds good Mike. I could use a great machinist! :thumbsup: If you look close at my shop pics, you'll see that I have an upstairs in the main shop. We'll just finish that off for you! :lol: Quote Link to comment
DRIVEN Posted December 29, 2008 Report Share Posted December 29, 2008 I understand, Mike. He has heat. How can I compete with that?:( Did I mention the stripper pole next to the pool table? Quote Link to comment
mklotz70 Posted December 29, 2008 Report Share Posted December 29, 2008 Sounds good Mike. I could use a great machinist! :thumbsup: If you look close at my shop pics, you'll see that I have an upstairs in the main shop. We'll just finish that off for you! :lol: SAWEEEEET!!! :) I understand, Mike. He has heat. How can I compete with that?:( Did I mention the stripper pole next to the pool table? Oh man! That sure makes the choice a bit harder!!!! .......um....wait.......who's the stripper pole for......me or hot chicks??? ....cause if it's for me, I'm gonna have to go with Bob!! :) Once I got all oiled up and workin' the pole...I'd never get any work done!! :) Maybe the 3 of us should converge on a common city and start up a shop!! We need to get Datrod in on it too....then we'd have a real machinist!! :) .....okay......I'm gonna start searching the web for adoption paperwork!!! Seriously.....Bob....at the rate you're going, I'd better get off my rear and check into that grill! Quote Link to comment
datrod Posted December 29, 2008 Report Share Posted December 29, 2008 SAWEEEEET!!! :) Oh man! That sure makes the choice a bit harder!!!! .......um....wait.......who's the stripper pole for......me or hot chicks??? ....cause if it's for me, I'm gonna have to go with Bob!! :) Once I got all oiled up and workin' the pole...I'd never get any work done!! :) Maybe the 3 of us should converge on a common city and start up a shop!! We need to get Datrod in on it too....then we'd have a real machinist!! :) .....okay......I'm gonna start searching the web for adoption paperwork!!! Seriously.....Bob....at the rate you're going, I'd better get off my rear and check into that grill! O.K. Let me know when & where to have my machines delivered :lol: Quote Link to comment
LAYEDOUTB2K Posted December 29, 2008 Report Share Posted December 29, 2008 Bob3: thats a nice shop you got there. i noticed all the kart bodywork on the walls:D. ive done quite a bit of karting over the years. heres my dads shop that ive been able to use over the years until recently when his projects became too big and needed the space so booted me out. recently this has been my workplace :( but now im in the process of buying this Quote Link to comment
mklotz70 Posted December 30, 2008 Report Share Posted December 30, 2008 O.K. Let me know when & where to have my machines delivered :lol: LOL! Heck....as long as I'm dreaming...I'm getting new ones!!! :) Quote Link to comment
Bob3 Posted December 30, 2008 Author Report Share Posted December 30, 2008 mklotz70 Quote:Seriously.....Bob....at the rate you're going, I'd better get off my rear and check into that grill! mklotz70 Quote:LOL! Heck....as long as I'm dreaming...I'm getting new ones!!! I'm sure we could dream up one hell of a shop! This forum is just so much fun, I love it! As far as the grill - just let me know!:thumbup: Bob Quote Link to comment
Madness Posted May 13, 2009 Report Share Posted May 13, 2009 I've got my own little corner at a buddy's shop. It's not bad but i wish it wasn't so packed all the time. Right now the toyota is blown apart, the frame over here, the cab over there and the bed right there... Before my monthly rent is was the back yard at my buddy troy's "hack shack" Quote Link to comment
LAYEDOUTB2K Posted May 13, 2009 Report Share Posted May 13, 2009 here is my workplace now. this was an old pic before i got much unpacked. there is about 4 feet cut off on the right of the pic. if i ever need to do any major work, i have 24/7 access to this shop too. Quote Link to comment
610SSS Posted May 16, 2009 Report Share Posted May 16, 2009 Not the biggest but it will have to do, for now anyway. Quote Link to comment
purple Posted May 17, 2009 Report Share Posted May 17, 2009 Right now I work outside next to my father-in-laws shop. I have 6 bikes inside his shop and another 20 or so at my mother-in-laws. But like my car they are mostly old school cruisers. My most expensive one is a purple Dyno with billet grips, 4 speed internal shifter and drum brakes. Quote Link to comment
hessianben Posted May 17, 2009 Report Share Posted May 17, 2009 TYPHOOOOON!!!! lets see some more of THAT thing!!! :eek: rare and tasty bird you have there my friend! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.