Eagle_Adam Posted June 30, 2016 Author Report Share Posted June 30, 2016 3ft wide(max they could print width wise) by whatever the proportional length came out to be(think 56in) I have the file on a thumb drive if it helps anyone else free to me = free to u 1 Quote Link to comment
Eagle_Adam Posted June 30, 2016 Author Report Share Posted June 30, 2016 Today's planned outings got sidelined And I diddnt really feel like fighting the wiring gremlin today so distracted myself until I could remedy the Chevy So I finally put up a much needed organizer :) Has potential Even better with my old organizer stacked ! And a few weeks ago I organized a bag that was all my electrical connectors into a clear plastic organizer but that quickly diddnt suffice so today I put em all into the new larger chest of bins I'd picked up and what do you know????? I burned a few hours without even trying ;) 2 Quote Link to comment
Eagle_Adam Posted June 30, 2016 Author Report Share Posted June 30, 2016 Bueno :D Did you know going thru 4 coffee cans of hardware can eat up another 4 hours minimum! 3 Quote Link to comment
Eagle_Adam Posted June 30, 2016 Author Report Share Posted June 30, 2016 But I was up at 5 so it was on to getting a lighting system on my new dolly so I can actually use it ;) Legally No finished pics but it will work :) Quote Link to comment
Eagle_Adam Posted June 30, 2016 Author Report Share Posted June 30, 2016 And cus it was dark now why not unpack the new stand light? Again no pics but I like it ;) 1 Quote Link to comment
hobospyder Posted June 30, 2016 Report Share Posted June 30, 2016 3ft wide(max they could print width wise) by whatever the proportional length came out to be(think 56in) I have the file on a thumb drive if it helps anyone else free to me = free to u I can use one but the file you have won't work for me. I have 73, 76 and 77 and I don't think they'll match up. Looking like you're moving along pretty well for being in the middle of a move though 1 Quote Link to comment
]2eDeYe Posted June 30, 2016 Report Share Posted June 30, 2016 I can scan the ones I have but they are haynes manual ones not service manual ones. 1 Quote Link to comment
Eagle_Adam Posted June 30, 2016 Author Report Share Posted June 30, 2016 I have more FSM's from other years, just gotta find the box they are in :) 2 Quote Link to comment
Eagle_Adam Posted June 30, 2016 Author Report Share Posted June 30, 2016 Trailer has lights!! The actual light will attach to the car via magnets Now to figure out ramps..... Ideas? 3 Quote Link to comment
]2eDeYe Posted June 30, 2016 Report Share Posted June 30, 2016 Wood blocks depending on how low the car is and one of these for dead ones should work well. 2 Quote Link to comment
Eagle_Adam Posted June 30, 2016 Author Report Share Posted June 30, 2016 And cus it was dark now why not unpack the new stand light? Again no pics but I like it ;) I'd say I have lights covered now 3 Quote Link to comment
Eagle_Adam Posted June 30, 2016 Author Report Share Posted June 30, 2016 Wood blocks depending on how low the car is and one of these for dead ones should work well. Already have a come along :D but it deff just got added to the trailer box! And wood blocks aren't a bad idea, I was thinking maybe a pair of the drive up/on ramps ppl use for oil changes and what not 1 Quote Link to comment
Eagle_Adam Posted June 30, 2016 Author Report Share Posted June 30, 2016 And the Chevy it back in action! Picked up a pair of lightly used tires and had em mounted Now I can do the car shuffle in the drive way and test the dolly lighting and do a dump run :D 3 Quote Link to comment
]2eDeYe Posted June 30, 2016 Report Share Posted June 30, 2016 Already have a come along :D but it deff just got added to the trailer box! And wood blocks aren't a bad idea, I was thinking maybe a pair of the drive up/on ramps ppl use for oil changes and what not Maybe just a couple 3ft long 2 x 6 boards. The drive up ramps would have to be modified a bit I would think. Loaded many a car on dollies and flatbeds with just a come along, slow but effective. 3 Quote Link to comment
Eagle_Adam Posted June 30, 2016 Author Report Share Posted June 30, 2016 Found this searching for ramp designs.... Doesn't help the tow dolly loading issue at hand but damn I want a set of these now that I've got a 2 car garage!! 3 Quote Link to comment
]2eDeYe Posted June 30, 2016 Report Share Posted June 30, 2016 Interesting... Not sure about using the particle board as a shear panel, seems to work though. 2 Quote Link to comment
Lockleaf Posted June 30, 2016 Report Share Posted June 30, 2016 The nicer sets of those, the center, between each front and rear wheel, pulls out so the car is just sitting on a set of stands. 3 Quote Link to comment
hobospyder Posted July 1, 2016 Report Share Posted July 1, 2016 The nicer sets of those, the center, between each front and rear wheel, pulls out so the car is just sitting on a set of stands. and now i want this..... i need to quit coming into this thread 1 Quote Link to comment
Eagle_Adam Posted July 1, 2016 Author Report Share Posted July 1, 2016 and now i want this..... i need to quit coming into this thread I know the feeling 1 Quote Link to comment
Eagle_Adam Posted July 1, 2016 Author Report Share Posted July 1, 2016 The nicer sets of those, the center, between each front and rear wheel, pulls out so the car is just sitting on a set of stands. Had to go look .... 1 Quote Link to comment
Eagle_Adam Posted July 1, 2016 Author Report Share Posted July 1, 2016 Then lost a couple hrs to these bad boys 2 Quote Link to comment
Eagle_Adam Posted July 1, 2016 Author Report Share Posted July 1, 2016 These seem to have tankers name written on em 2 Quote Link to comment
hobospyder Posted July 1, 2016 Report Share Posted July 1, 2016 That is a lot of stop. 3 Quote Link to comment
The Taterhead Posted July 1, 2016 Report Share Posted July 1, 2016 http://m.harborfreight.com/2-piece-steel-loading-ramps-44649.html https://www.cargogear.com/OneItemInfo.aspx?partnum=RMP07521 Sorry, tiny pic 2 Quote Link to comment
Eagle_Adam Posted December 14, 2016 Author Report Share Posted December 14, 2016 Ol, back to the datsun. Life took a detour and wrenching got pushed to the back of the list of important shit to do. Pic's in a day or two after I get all the x-mad shit cleaned outta my garage 3 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.