Javier 1111 Posted March 6, 2013 Report Share Posted March 6, 2013 thanks for helping Quote Link to comment
Eagle_Adam Posted March 6, 2013 Report Share Posted March 6, 2013 there is no kit, welcome to the world of datsuns! (that arent 510's or Z's) 1 Quote Link to comment
datzenmike Posted March 6, 2013 Report Share Posted March 6, 2013 Are you wanting to replace the old rubber bushings? or firm up the ride with stiffer springs? Perhaps lower? higher? This can be done but there is no 'kit' for it. Quote Link to comment
Farmer Posted March 7, 2013 Report Share Posted March 7, 2013 Rockauto.com is your friend 2 Quote Link to comment
Javier 1111 Posted March 8, 2013 Author Report Share Posted March 8, 2013 i just want to restore all the suspension but i dont really know what to get Quote Link to comment
Javier 1111 Posted March 8, 2013 Author Report Share Posted March 8, 2013 i just change the spark plugs and cables but still a little sound like is not getting enough power any ideas??? Quote Link to comment
bonvo Posted March 8, 2013 Report Share Posted March 8, 2013 points distributor or electronic ignition? Quote Link to comment
Javier 1111 Posted March 9, 2013 Author Report Share Posted March 9, 2013 whats the electronic ignition??? Quote Link to comment
datzenmike Posted March 9, 2013 Report Share Posted March 9, 2013 i just want to restore all the suspension but i dont really know what to get Don't fix what ain't broken. If the rubber is in good shape then leave it. I don't know what year yors is, maybe fill it in in your profile?, but pre '78s had sway bars and the links can rust away and the bushings fall out. Replacing them would be worthwhile. Maybe the tension rod bushings, but only with rubber. Rear leaf spring shackle rubber bushings? again only if needed. i just change the spark plugs and cables but still a little sound like is not getting enough power any ideas??? Sound and experience is all relative. To you it may sound like "not getting enough power" yet everything may be fine. Maybe you could elaborate on this? Quote Link to comment
graveltrapp Posted March 9, 2013 Report Share Posted March 9, 2013 There is defiantly a lot of love and excellent advice on the forum towards the 620, but It "sounds" like you should first invest some time on the forums, Youtube, and a Factory Service Manual before tearing into random projects without having a goal or reason. What area of the truck are these low powered noises coming from? There is a lot of good info on the forum, just spend a few evenings reading all you can and you can bet that if you can think it up it has already been answered in the search bar. You have just tapped in to the very powerful drug of Ratsun, Adjust your valves, set your timing and get a new fuel filter and enjoy the ride. 1 Quote Link to comment
HRH Posted March 9, 2013 Report Share Posted March 9, 2013 +1. You need a manual and some direction. Read three times, do once. Quote Link to comment
metalmonkey47 Posted March 9, 2013 Report Share Posted March 9, 2013 Oh god here we go..... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.