bananahamuck Posted November 5, 2013 Report Share Posted November 5, 2013 I read that the British(?) never got the 2door or the wagon, but i don't know if true. Quote Link to comment
datsunfreak Posted November 5, 2013 Report Share Posted November 5, 2013 I read that the British(?) never got the 2door Sadly, this was common with a LOT of Datsun models... Quote Link to comment
datzenmike Posted November 5, 2013 Report Share Posted November 5, 2013 As I recall the A10 had three different length transmissions. So plan carefully. Early 4spd, late 4spd, auto. L20B and Z20 are same I think. 4spd and 5spd used same driveshaft I think. Early 4 speed would be L series, late 4 speed would be Z series. Both are F4W63L and should be 26" long The dogleg 5 speed should also be early L series and late Z series but the same 26" length. There would also be L and Z series automatics that were 31.5" long. It would seem the 4 and 5 speeds could share the same driveshaft and the automatic driveshaft would be shorter... probably allowing the use of a 31.5" 71-B 5 speed swap? I don't know the A10 that well. Quote Link to comment
ggzilla Posted November 5, 2013 Report Share Posted November 5, 2013 Or maybe not ... Quote Link to comment
datzenmike Posted November 5, 2013 Report Share Posted November 5, 2013 I should have said I haven't worked with one, so part of this is a good guess. The 710 is all L series but the 4 speed is short and the auto long. I swapped a 5 speed zx tranny in by using the shorter auto driveshaft. Seems like this would work in the A10. Quote Link to comment
datsunaholic Posted November 5, 2013 Report Share Posted November 5, 2013 The A10 automatic was longer than the manual transmission. I've had all flavors of A10 transmissions the US got except the (possibly a typo in the manual) the 60-series 5-speed that was supposedly used in the 1981 wagon. The automatic driveshaft is shorter. The sedan and hatchback driveshafts are the same length- dunno about the wagons, as oddly I've never had problems with them (in my hatchbacks and 2-doors, I have). 1978-79 A10s were available in 4 body styles, all had the L20B engine: 2-Door Sedan (HLA10): These came with 4-speed manual STANDARD, and had an Automatic AND the 5-speed as an option. 4-door Sedan (also HLA10): These also came standard with a 4-speed, and an Automatic as an option. I've heard, but cannot verify, that the 5-speed was an option on those. 3-door hatchback (KHLA10). These came with a 5-speed STANDARD and an Automatic OPTIONAL, though I've heard of but never seen ones with 4-speeds. 5-door wagon (WHLA10): These came with a 4-speed standards and an Automatic optional. 5-speeds were not available from the factory, and were not presented as an option at all. There is very little difference between a 78 and a 79. The only differences I know of are, the 78 used a remote-ignitor ignition, 79 used a matchbox. The idiot lights on the dash had a slightly different font. The dash facia had extra cutouts for the illumination warning system, the clock was digital instead of analog (at least on some), and the console gained an armrest. 1980-81 was also available in 4 body styles. The only one that changed was the 3-door hatchback was replaced with a 5-door hatchback. The 3-door continued to be built for non-North American markets but was dropped in the US. The big change in 1980 was the engine, which switched from the L20B to the Z20S in the US. 49-State engines had 4 spark plugs in 1980. California 1980 and all 1981 Z20S engines had 8 plugs. The 5-speed may or may not have become an option on Wagons, but was always optional on everything else. The 4-speed was standard on all models and an automatic was optional was well. Body changes were cosmetic- no sheet metal changes to removable panels, but the grille was changed to a flat, horizontal bar grille with square headlights. The sedan taillights were redesigned. The bumper "pushers" were made much smaller. There were minor changes to the lens housings for the front turn signals (not the wiring plugs were totally different). Wagon taillights remained the same. Interior differences was a major redesign of the instrument cluster and dash facia. eliminating the "pod" type gauges for a single "cluster (though behind it they didn't change much at all). The tach became standard (it was a vary rare option in 78-79), and the cluster added an oil pressure gauge and a voltmeter. eliminating the oil pressure idiot light. There's other small stuff, and plenty of cars have become mutts over the years so finding 5-speed wagons, L-series square headlight or Z-series round headlight cars isn't that uncommon. 1 Quote Link to comment
alexmeans Posted November 9, 2013 Report Share Posted November 9, 2013 Time has come to try and change steering wheels, Ran into an issue but my thought was.. The plastic piece that is part of the steering hub, how do I remove that so I can remove the three prong adapter? I ask Yee, Gods, Help a poor human in his conquest of his car! Quote Link to comment
datsunfreak Posted November 9, 2013 Report Share Posted November 9, 2013 Time has come to try and change steering wheels, Ran into an issue but my thought was.. The plastic piece that is part of the steering hub, how do I remove that so I can remove the three prong adapter? 1. Remove the big nut in the center, then use a puller to remove the hub itself. 2. What the heck is a "three prong adapter"?? Quote Link to comment
flatcat19 Posted November 9, 2013 Report Share Posted November 9, 2013 Ugh. I'm glad mine didn't come with that style of wheel. I had the 3 spoke one. What wheel ya switching to? Quote Link to comment
alexmeans Posted November 9, 2013 Report Share Posted November 9, 2013 That's what I thought, The prong I meant as the 3 bolt hub there (tri hole center) *not smart with words* Where can I get a puller at? O'Reilly? Autozone? Quote Link to comment
alexmeans Posted November 9, 2013 Report Share Posted November 9, 2013 A no name Ebay for now.. I need a litter Meteor (ar ar) wheel for me to grab on to. Quote Link to comment
flatcat19 Posted November 9, 2013 Report Share Posted November 9, 2013 You don't need a puller. It will come off by hitting it back and forth. Just need to get that nut off first. Then remove the steering wheel nut. Quote Link to comment
alexmeans Posted November 9, 2013 Report Share Posted November 9, 2013 I can get the nut and bolts off just fine to get the wheel off, I'll try tomorrow with a rubber mallet to hit the hub a bit and see what happens.. I ran into a metal shavings near the threaded part of the hub, I'm excited... :blush: Quote Link to comment
flatcat19 Posted November 9, 2013 Report Share Posted November 9, 2013 Need/want a complete round eye grill swap for yours, Alex? Quote Link to comment
alexmeans Posted November 9, 2013 Report Share Posted November 9, 2013 Depends how much, but got any pics? Quote Link to comment
flatcat19 Posted November 9, 2013 Report Share Posted November 9, 2013 I paid $100 so you pay $100. There are pics a few pages back. I have actually never seen it myself. Robopineapple bought it from a yard where he lives-it got sent to bananahamuck's house-from there to Wayno. From Wayno to Banner who is holding it for me. Maybe pineapple or hamuck still have a pic of it? I don't have the A10 anymore so I do not need the grill. $100 plus shipping at it's yours. Quote Link to comment
ggzilla Posted November 9, 2013 Report Share Posted November 9, 2013 Oreillys rents the puller for a fee bucks. Saves knocking yourself out. Quote Link to comment
Fat510 Posted November 9, 2013 Report Share Posted November 9, 2013 why wouldnt you use a puller? Quote Link to comment
flatcat19 Posted November 9, 2013 Report Share Posted November 9, 2013 Because I have never had to. I bought one years ago. Still sitting in the box unused. Quote Link to comment
Fat510 Posted November 9, 2013 Report Share Posted November 9, 2013 i used one on mine... just sayin Quote Link to comment
flatcat19 Posted November 9, 2013 Report Share Posted November 9, 2013 No problem with using one. Most of the time jarring it loose with quick whack will loosen them up enough. I don't use pullers on new cars either. Quote Link to comment
mhub91 Posted November 9, 2013 Report Share Posted November 9, 2013 I've never had to use a puller. Ever. Pussies use pullers. Quote Link to comment
flatcat19 Posted November 9, 2013 Report Share Posted November 9, 2013 Bwahaha Owned mine for 6 years. Used it twice to remove crank pulleys. Quote Link to comment
mhub91 Posted November 9, 2013 Report Share Posted November 9, 2013 You know what's weird... I've only removed mate 3-4 crank pulleys, but they always come right off no problem for me Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.