73Datsun620 Posted June 21, 2012 Report Share Posted June 21, 2012 Hey guys I am working on getting the title for the truck I originally bought for parts, and so I am going to part out the old truck. If you need any parts please message me on this post or private message me to let me know what you need and I will get pictures for you of what those parts look like. Thanks guys. Link to comment
Eagle_Adam Posted June 21, 2012 Report Share Posted June 21, 2012 where are you located? Link to comment
73Datsun620 Posted June 21, 2012 Author Report Share Posted June 21, 2012 Shady Point, Oklahoma Link to comment
jbirds510 Posted June 21, 2012 Report Share Posted June 21, 2012 Id be interested in the hood latch mechanism and ill pm you with another request. Link to comment
nthedrk71 Posted June 22, 2012 Report Share Posted June 22, 2012 Might you have a pair of the plastic pieces (thier about 18 inches long by about three inches wide, I think they just block you from seeing under the seat) that bolt to the floor board that go along the side of the seat rails. Not sure what they are called. please let me know. Thanks Darin Link to comment
Radiant-Designer Posted June 22, 2012 Report Share Posted June 22, 2012 Ive been looking for Tach (same as everyone), bumperettes, smaller mirrors (not the original 620 mirrors, but lots of 620s have some).... probably forgetting a LOT of stuff i want. Link to comment
73Datsun620 Posted June 22, 2012 Author Report Share Posted June 22, 2012 no tach, I will check the cover for the bottom of the seat, and I'll be taking pictures of requested parts today....I'll check the hood latch when I do that Link to comment
73Datsun620 Posted June 24, 2012 Author Report Share Posted June 24, 2012 ~bump~ hood cowl pending sell, hood latch pending sell, headlights pending sell - I'll get this parts off and get prices for you guys with shipping tomorrow, it's my birthday today. :) Link to comment
73Datsun620 Posted June 24, 2012 Author Report Share Posted June 24, 2012 Also, I have the rear end already pulled if anyone needs that, and I have a 3 spd auto with torque converter and a 4 spd manual with plate, both may need rebuilds. Also, I have a short drive shaft with bump guard, and I am open to parts trades - let me know what you have that might be needed on the new 72 620 i have. Link to comment
datsundash Posted June 24, 2012 Report Share Posted June 24, 2012 I am looking for the fresh air vent control rods and bushings, as well as the hot air defrost tubes, the little chrome pieces on the fresh air vents, the fiber optic cables, the gauge bezel, and probably more I am forgetting lol. Link to comment
Ranman72 Posted June 24, 2012 Report Share Posted June 24, 2012 ~bump~ hood cowl pending sell, hood latch pending sell, headlights pending sell - I'll get this parts off and get prices for you guys with shipping tomorrow, it's my birthday today. :) happy birthday Link to comment
73Datsun620 Posted June 26, 2012 Author Report Share Posted June 26, 2012 posting some parts pics soon Link to comment
73Datsun620 Posted June 26, 2012 Author Report Share Posted June 26, 2012 Grill - $25 plus shipping Link to comment
mezoman Posted July 13, 2012 Report Share Posted July 13, 2012 Are your rims for sale. I'd be very interested in those. How much? Link to comment
Enixxi Posted July 13, 2012 Report Share Posted July 13, 2012 How much for the tailight/ rear turn signal lenses shipped to 85757? Link to comment
bbqbill Posted July 16, 2012 Report Share Posted July 16, 2012 how much for fenders ? to 48101 Link to comment
Z chopper Posted July 16, 2012 Report Share Posted July 16, 2012 the headlight and washer switches if they are the green ones 1 Link to comment
Willdatsun Posted July 16, 2012 Report Share Posted July 16, 2012 Is it a long or short bed? Link to comment
DREWSDIME Posted July 16, 2012 Report Share Posted July 16, 2012 How much for steering column cover shipped to Upland,CA 91786 Link to comment
Epik_620 Posted July 20, 2012 Report Share Posted July 20, 2012 driver side window regulator shipped to 85716? Link to comment
dahveesdatsun Posted July 20, 2012 Report Share Posted July 20, 2012 passenger side fender ? font valence ? pm prices please to 90220 los angeles ca Link to comment
Sirsedrith Posted July 21, 2012 Report Share Posted July 21, 2012 Still Parting this out? Im looking for a running engine. 1 Link to comment
Recommended Posts