mrbigtanker Posted May 10, 2012 Author Report Share Posted May 10, 2012 are you going more lower or is that the final stance? Yes i am.Im doing front coil overs and i want to bring the front down more.The back is 4" and the front is were it was from before i put the 4" blocks on the rear. Quote Link to comment
skyblue Posted May 10, 2012 Report Share Posted May 10, 2012 sweet! i'm thinking of going 4" in the rear to level out my stance. how much travel do you have with the 4inchers? Quote Link to comment
mrbigtanker Posted May 10, 2012 Author Report Share Posted May 10, 2012 sweet! i'm thinking of going 4" in the rear to level out my stance. how much travel do you have with the 4inchers? Ill let you know when i get a chance.One thing to remember is that with the 17" wheels i had on before the rim would hit the the bottom bracket for the U bolts.Now with the 18" wheels on the rear i could go down one more inch.So the front will meet the fender well hopefully with no turning problems.But i want to finish everything else first.My inner tie rods need to be flipped i need some longer wheel studs im still trying tofigure out were im mounting my fuel filter and fuel pump and i need to run a remote oil filter mount,its really close to the engine mount. Quote Link to comment
skyblue Posted May 10, 2012 Report Share Posted May 10, 2012 oh wow ok. you're so close. you must be super excited. hell, i am and it's not even mine. :P for reals though your truck is freaking awesome. Quote Link to comment
mrbigtanker Posted May 10, 2012 Author Report Share Posted May 10, 2012 oh wow ok. you're so close. you must be super excited. hell, i am and it's not even mine. :P for reals though your truck is freaking awesome. Thank alot i hope it just runs right or good i might say and i dont have all kinds of issues. Quote Link to comment
hardslammed Posted May 10, 2012 Report Share Posted May 10, 2012 I am trying to figure out where I'm goin to mount my inline fuel pump and filter too... I have some other good ideas on how to hide a bunch of other shit but I gotta try it out first then I'll share it with ya.... Trucks lookin good doggy. Hope to see you around one of these days Quote Link to comment
mrbigtanker Posted May 10, 2012 Author Report Share Posted May 10, 2012 I am trying to figure out where I'm goin to mount my inline fuel pump and filter too... I have some other good ideas on how to hide a bunch of other shit but I gotta try it out first then I'll share it with ya.... Trucks lookin good doggy. Hope to see you around one of these days You will see me maybe JCCS.I have been thinking about mounting to the frame rails but on one hand i want them exposed and on the other hand i dont.I have Aeromotive fuel filter and fuel pump and there nice to see but i dont know what direction to go.If anyone has some ideas with pictures that would i guess help both of us out. Quote Link to comment
mrbigtanker Posted May 11, 2012 Author Report Share Posted May 11, 2012 Let see today i mounted the fuel pressure regulator and got the starter going trying to run different bolts small thing no big deal and need to get the alternator figured out so i dont go to close to block for the radiator hose and not to far down so i do not hit the idler arm.Wil upload new pictures once more is done. Quote Link to comment
hacked521 Posted May 12, 2012 Report Share Posted May 12, 2012 im a little late but those wheels look dam nice! Quote Link to comment
mrbigtanker Posted May 12, 2012 Author Report Share Posted May 12, 2012 im a little late but those wheels look dam nice! thank you Quote Link to comment
krecs Posted May 16, 2012 Report Share Posted May 16, 2012 hey i need the parts to reverse the taper my truck is running i will drive it to portillos on saturday Quote Link to comment
mrbigtanker Posted May 16, 2012 Author Report Share Posted May 16, 2012 hey i need the parts to reverse the taper my truck is running i will drive it to portillos on saturday I will try to get it off by then.I got my mom in town from hawaii.But i want to try and make it to this weekend. Quote Link to comment
krecs Posted May 16, 2012 Report Share Posted May 16, 2012 no problem enjoy the family if you need help let me know Quote Link to comment
mrbigtanker Posted May 16, 2012 Author Report Share Posted May 16, 2012 This is how i got the name Mrbigtanker.Its nice to know you fixed a skate board to a big Peterbilt 379 long hood.This truck was capable of 650HP and about 2150 Lbs of torque. Quote Link to comment
mrbigtanker Posted May 16, 2012 Author Report Share Posted May 16, 2012 no problem enjoy the family if you need help let me know Thank you my love. Quote Link to comment
krecs Posted May 16, 2012 Report Share Posted May 16, 2012 man nice rig with that viser all you need is some spoke wheels and dinggle verries hanging from the winshield Quote Link to comment
mrbigtanker Posted May 16, 2012 Author Report Share Posted May 16, 2012 Also my 2005 Fatboy i fixed up.Performance machine front to back way more dollars to do a bike then a Datsun thats for sure. Quote Link to comment
mrbigtanker Posted May 16, 2012 Author Report Share Posted May 16, 2012 man nice rig with that viser all you need is some spoke wheels and dinggle verries hanging from the winshield Ieeeeee amigo Quote Link to comment
krecs Posted May 16, 2012 Report Share Posted May 16, 2012 chingao the next picture is going tobe the ss trailblaser Quote Link to comment
mrbigtanker Posted May 16, 2012 Author Report Share Posted May 16, 2012 You know i dont have one.Ill get one check out he events section and look under inland empire i just uploaded a picture there. Quote Link to comment
mrbigtanker Posted May 16, 2012 Author Report Share Posted May 16, 2012 my wifes TBSS.Cheap sale same rims like on my datsun. Quote Link to comment
mrbigtanker Posted May 18, 2012 Author Report Share Posted May 18, 2012 Not much right now.Mounted the fuel pressure regulator,the lines are a little tighter then i wanted them to be,but i want it as clean as i can make it.What do you think,man fuel lines are not cheap. Quote Link to comment
Busta Nut Posted May 18, 2012 Report Share Posted May 18, 2012 :wub: It's soooooooo shiny!! :wub: Quote Link to comment
mrbigtanker Posted May 18, 2012 Author Report Share Posted May 18, 2012 Thanks I hope I don't regret it. Quote Link to comment
oldskoolvws Posted May 20, 2012 Report Share Posted May 20, 2012 ^^^ you will :w00t: ^^^ Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.