bananahamuck Posted September 25, 2017 Author Report Share Posted September 25, 2017 1 Quote Link to comment
datzenmike Posted September 26, 2017 Report Share Posted September 26, 2017 '82/'83 S110 diff??? Or '84 S12??? Would LOVE one of those. 2 Quote Link to comment
bananahamuck Posted September 26, 2017 Author Report Share Posted September 26, 2017 junkyard owner said it was 82-83 200sx ,,, but it was in an 80 something customized 210 up on top of a stack of the crusher pile. He said it used to be his personal car and it ran a NapZ24 with a turbo.... Plate is bugged out to keep this secret stash,,,,,,,,,,,,,,,,,,,,,,,, a secret. .We found another of the same setup still in 200sx but it is at the bottom of the crusher pile,,,,, in the mud. . 1 Quote Link to comment
bananahamuck Posted September 26, 2017 Author Report Share Posted September 26, 2017 Follow up of the "new" Doody mobile ,, car is together and driving him to work at probably way to high of speeds now,, BOOM!! . 3 Quote Link to comment
]2eDeYe Posted September 27, 2017 Report Share Posted September 27, 2017 Looks like something fell off.... :lol: 2 Quote Link to comment
KoHeartsGPA Posted September 27, 2017 Report Share Posted September 27, 2017 Something! 1 Quote Link to comment
q-tip Posted September 27, 2017 Report Share Posted September 27, 2017 It'll buff out... 1 Quote Link to comment
bananahamuck Posted March 14, 2020 Author Report Share Posted March 14, 2020 (edited) Three years since last update.. Lean miss backfire ,, still made it 20+ miles to home at freeway speeds Throttle shafts were extremely loose but needed to be driven to get out of hibernation .. Pretty sure at the very least screw head went through the valves.. whoopsie daisy ,, haha . Edited March 14, 2020 by bananahamuck Quote Link to comment
datzenmike Posted March 14, 2020 Report Share Posted March 14, 2020 Open chamber head and it's small size.... could have gone right through. 1 Quote Link to comment
bananahamuck Posted March 17, 2020 Author Report Share Posted March 17, 2020 (edited) On 3/13/2020 at 9:31 PM, datzenmike said: Open chamber head and it's small size.... could have gone right through. A87 peanut ,, but yeah it sure looks by the plug it at least went in.. thinking put on a different carb and letting it ride .. But this is the same head that if you remember at Canby ( when we could still camp in almost whole field) we were having a time getting the valves adjusted on in one of the cylinders , as they had drilled into seats so far .. he should just bite the bullet and Ka24e swap the stupid thing already.. he has enough setups to do it at least 3 times over .. just needs to get off the videa games and do it Edited March 17, 2020 by bananahamuck Quote Link to comment
datzenmike Posted March 17, 2020 Report Share Posted March 17, 2020 Hmmm might be pressed into the head then. I pulled a Chev six cylinder head once because the owner had had someone deliberately throw a small bolt down the carb. This was before hoods were opened with a cable from inside and anyone could open your hood on the street. Sure enough the bolt was pressed into the piston just missing the rings, maybe 1/4" in and the head was hitting the underside of the head and making a noise when running. I 'unscrewed' it and put back together with a gasket and all was well. Quote Link to comment
Fat510 Posted October 28, 2020 Report Share Posted October 28, 2020 (edited) Probably since I changed the dizzy (felt like it was flooding out) it developed a serious vacuum leak on the carb shafts. So with a working dizzy and no vacuum leak anymore and valves that haven't been adjusted since, it doesn't run that bad despite running on three cylinders in adjusted valves with a carb with linkage that sticks. Accelerate from a stop, get to second, linkage sticks half open, basically power shifting now, turn off car while in gear to slow down, secondary is also stuck open, pulling fuel that entire time it was off, turn key back on, big boom pull over and unstick linkage. I was driving all over town for about an hour while this was happening, luckily the entire choke flap didn't get blown off haha it might be KA time, after putting coilovers and and a W58 into my cressida. Edited October 28, 2020 by Fat510 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.