metalmonkey47 Posted October 22, 2011 Author Report Share Posted October 22, 2011 Quote Link to comment
Master-O-Turbonics Posted October 23, 2011 Report Share Posted October 23, 2011 OOH high dollar YELLOW battery. ;-) Quote Link to comment
bananahamuck Posted October 24, 2011 Report Share Posted October 24, 2011 I'm gonna ignore that I hear that WAY too muuch :rofl: Dude all the younger guys have buzz cuts now a days it`s like looking at a 1950s high school yearbook ,,,,,,,F--ing creeps me out man...... Rock the hair, cuz someday it may be gone. Quote Link to comment
metalmonkey47 Posted October 25, 2011 Author Report Share Posted October 25, 2011 Dude all the younger guys have buzz cuts now a days it`s like looking at a 1950s high school yearbook ,,,,,,,F--ing creeps me out man...... Rock the hair, cuz someday it may be gone. All the kids now a days looks like fawking douches. Long hair was the thing to have 6 years ago, and now it's buzz cuts and mohawks. Fuck that, I like my hair long ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Temp switch took a shit, so I grabbed a whole new 2 piece thermostat housing from my parts stash and started polishing it up to go on the engine. Hardware was questionable, so obviously at the price, I just replaced that shit.. ///sofresh BEFORE AFTER Quote Link to comment
Skib Posted October 26, 2011 Report Share Posted October 26, 2011 All the kids now a days looks like fawking douches. Long hair was the thing to have 6 years ago, and now it's buzz cuts and mohawks. hey, Iv had a mowhawk for the last 7 years. so.... :fu: suck it bieber 1 Quote Link to comment
RadioRedline Posted October 29, 2011 Report Share Posted October 29, 2011 Awesome ride yo Radio Quote Link to comment
metalmonkey47 Posted October 31, 2011 Author Report Share Posted October 31, 2011 (edited) Been doing a ton today before I go to work in a few hours. Going through and inspecting all the brakes, since I've been having a funky problem with the parking brake. Sanded all the drums and painted them with engine enamel. So far, the shoes and hardware all look good. Front wheel cyl's look brand new, rears are leaking like a sonovabitch so I'm going to go get some in a few days. Front right wheel was out of adjustment, but so far all others are good. Oics in a bit perhaps? Edited October 31, 2011 by metalmonkey47 Quote Link to comment
metalmonkey47 Posted November 7, 2011 Author Report Share Posted November 7, 2011 (edited) Been smelling exhaust since jumping on the interstate the yesterday to SF2 Pulled up the floor mats today, and saw that someone layed some sheet steel over the pans. Heres why: Got my younger brother to strip the sheets of steel so I can prime them. I swept the floor up since it was covered in flakes and sprayed in some cheap primer until I can get my welder out and patch it. I fear the pans may be too weak to repair. Until I can get to it in a few days, I have some duct tape over the holes. It will work for now. Edited November 7, 2011 by metalmonkey47 Quote Link to comment
I'm BLUE Posted November 7, 2011 Report Share Posted November 7, 2011 Errrrrrr that sucks :( ... Looking at firewall ... Is windshield or coal area leaking possi :huh: bly ? Idk Glad u caught this in time ! :cool: Harborfreight sells some sheet metal clamps ... They work great !!! For butt welds ... Remember 4 inch stitches and spot welding to prevent warpage ... 4 inch increments ... Use body hammer and clamps ... At least that's how I know lol ... Sheet metal work takes me a bit sometimes ... Lol Good luck bud Quote Link to comment
Master-O-Turbonics Posted November 7, 2011 Report Share Posted November 7, 2011 Monkey, your bandwidth is too small, and has failed you. Quote Link to comment
metalmonkey47 Posted November 11, 2011 Author Report Share Posted November 11, 2011 Sorry guys, I am WAY too lazy to fix the bandwidth problem, so those oics are down for a few more days. Until then, I have a new photobucket! Quote Link to comment
metalmonkey47 Posted November 11, 2011 Author Report Share Posted November 11, 2011 I have a happy truck. Got an L16 thermostat housing, lightly polished it, and now I don't have an ugly ass water outlet Quote Link to comment
metalmonkey47 Posted November 19, 2011 Author Report Share Posted November 19, 2011 Bump for my photobucket back online ;) I chopped off the exhaust yesterday because I needed to move it out to make measurements for my fuel cell. It's running a 2'' straight pipe that turns out right in front of the driver side rear tire. Sounds good as hell, but it's WAY loud. I'm picking up a resonator when I go by Summit Racing next week. Quote Link to comment
510kevin Posted November 19, 2011 Report Share Posted November 19, 2011 Lookin good munkee, glad you got a real Datsun lol!!! Quote Link to comment
metalmonkey47 Posted November 19, 2011 Author Report Share Posted November 19, 2011 Lookin good munkee, glad you got a real Datsun lol!!! lolol hey man, that 210 was a beast! haha It pulled a tad bit harder then my 620 does now with a Weber and straight pipes. lol That little A motor had some serious balls when I was done with it Quote Link to comment
metalmonkey47 Posted November 20, 2011 Author Report Share Posted November 20, 2011 o rly? Quote Link to comment
I'm BLUE Posted November 20, 2011 Report Share Posted November 20, 2011 :D ,,nice !!!! , ,,, I'm waaaaayyy jealous you haz a Summit-Racing near you !!!! :lol: :cool: Still gonna use square tubing to frame it in ? Quote Link to comment
bananahamuck Posted November 20, 2011 Report Share Posted November 20, 2011 Very nice ........ Quote Link to comment
Master-O-Turbonics Posted November 20, 2011 Report Share Posted November 20, 2011 EPIC FAYULLLL WAYYYYY too freaking long hose clamp. :-P 1 Quote Link to comment
metalmonkey47 Posted November 22, 2011 Author Report Share Posted November 22, 2011 (edited) :D ,,nice !!!! , ,,, I'm waaaaayyy jealous you haz a Summit-Racing near you !!!! :lol: :cool: Still gonna use square tubing to frame it in ? It's AWESOME at summit :D HUGE amounts of everything you could ever want I haven't decided on the frame yet, I think I may use angle iron and 1/4 steel. Gonna hang it, and see what i can work with EPIC FAYULLLL WAYYYYY too freaking long hose clamp. :-P bite me I cut it off after that picture Edited November 22, 2011 by metalmonkey47 Quote Link to comment
Skib Posted November 22, 2011 Report Share Posted November 22, 2011 had no idea there was an actual summit store. 3 Quote Link to comment
yello620 Posted November 22, 2011 Report Share Posted November 22, 2011 bite me I cut it off after that picture Pics or it didnt happen. :D Quote Link to comment
Rockatansky620 Posted November 22, 2011 Report Share Posted November 22, 2011 had no idea there was an actual summit store. Oh there is.. and its friggin sweet. And with it being a distribution center, they have almost anything there in stock that they sell on the website. Quote Link to comment
metalmonkey47 Posted November 23, 2011 Author Report Share Posted November 23, 2011 (edited) took her for a longggg sprint tonight. Don't know why, but she had a MASSIVE top end tonight. It's been bouncing around lately, sometimes lacking a little power. I've had the carb apart a dozen times now, so I think it may be time to finally swap in my electronic dizzy Got a quick video clip of me trying her out. You can hear it spin through second before the tires finally grab. Third had a little chirp. It's very rare that I'm rough on her, but she's a bad little girl when I do. http://www.youtube.com/watch?v=5jGvAADfSK4&feature Edited November 23, 2011 by metalmonkey47 Quote Link to comment
metalmonkey47 Posted November 26, 2011 Author Report Share Posted November 26, 2011 Update: Haven't really played a lot with it, but I know a few things that need to be dealt with. I've gotta get an air cleaner on this things and get the gas tank mounted. I've finally decided to mount the tank, I'm making two rails out of 1/4 inch thick 1 inch wide/tall angled steel and I'm taking some big 2 inch stainless U-bolts to mount it to the rear frame rails. She's been running good other then when cold. Not a biggie. I'm going electronic ignition one of these days, so it's not TOO big of a deal. For now, I'm just cleaning up everything I have and removing all the un-necessary little things under the hood. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.