bonvo Posted April 14, 2012 Author Report Share Posted April 14, 2012 mike my hood is already fucked and it goes with the road race look i want Quote Link to comment
Will Posted April 20, 2012 Report Share Posted April 20, 2012 I picked up my 710 in California and drove it back to New York - it's nice to see another cross-country Datsun trip meet with success! (Plus, your trip was cross-continent. Even better!) Did it give you any trouble along the way? I somehow once wound up with a bicycle that was made in Geelong... an Australian friend said that that town is known for making good pies. hi all, been on here for a while lurking, but time to start posting. Just picked up a datsun 180bsss from geelong,victoria (australia) and drove back to western australia about 3500kms Have been chasing one for a while now, so when i saw this one i bit the bullet any brought it. Anyway some pics now of the car and some of the journey. Quote Link to comment
nisman Posted April 21, 2012 Report Share Posted April 21, 2012 I picked up my 710 in California and drove it back to New York - it's nice to see another cross-country Datsun trip meet with success! (Plus, your trip was cross-continent. Even better!) Did it give you any trouble along the way? I somehow once wound up with a bicycle that was made in Geelong... an Australian friend said that that town is known for making good pies. no problems at all on the way across, purred like a kitten. About the most interesting thing in geelong is the ford factory and museum (que backlash from geelong community). How far is california to new york? Love the slots, so quiet and doesn't compete with the car. No hood pins. I had them stock from the factory on my Dart and never liked them. After market ones were even worse. Don't put holes in your hood! Hood pins were on the car when i bought it, also had oil cooler fitted and r31 skyline rear discs. Now has subaru lsd diff fitted 4.4 ratio with billet stub axels and golf mk1 chin spoiler to be fitted. Also just got my american tail-lights (the triple square ones) to be painted and fitted (a very big thanks to dave if hes on this forum for sourcing and sending me them.) Will put up more pics as being modded. Quote Link to comment
Will Posted April 21, 2012 Report Share Posted April 21, 2012 no problems at all on the way across, purred like a kitten. About the most interesting thing in geelong is the ford factory and museum (que backlash from geelong community). How far is california to new york? By the time I was done driving, I'd traveled almost 4,000 miles (about 6,400km) - but I didn't go in a totally straight line. It would have been 3,000 miles if I took the shortest route possible, but the way I went let me visit some friends and eat some great fried chicken. There are some pictures over here: http://community.ratsun.net/topic/31440-so-i-found-the-710-of-my-dreams-time-for-a-cross-country-trip/ Quote Link to comment
dobo Posted May 4, 2012 Report Share Posted May 4, 2012 Nisman thats a fair trek :w00t: Glad to see you trusted the dato and it got you there! jealous though! Quote Link to comment
nisman Posted May 4, 2012 Report Share Posted May 4, 2012 By the time I was done driving, I'd traveled almost 4,000 miles (about 6,400km) - but I didn't go in a totally straight line. It would have been 3,000 miles if I took the shortest route possible, but the way I went let me visit some friends and eat some great fried chicken. There are some pictures over here: http://community.rat...s-country-trip/ awsome stuff, lov'in the pic with the engine in the passengers side. Nisman thats a fair trek :w00t: Glad to see you trusted the dato and it got you there! jealous though! Its an awsome drive , i want to do it again, hmmm.. maybe some more dattos. That would be cool Quote Link to comment
dobo Posted May 4, 2012 Report Share Posted May 4, 2012 yeah I've driven up the middle to Darwin but not over to the west, it would be awesome i agree. anyway this is what i am aiming for with my 610. but with 2 more doors Quote Link to comment
SublimeDatsun610 Posted May 6, 2012 Report Share Posted May 6, 2012 yeah I've driven up the middle to Darwin but not over to the west, it would be awesome i agree. anyway this is what i am aiming for with my 610. but with 2 more doors dobo, then you need to take a few pages from Zerows book. his sedan is the shit! he puts the ASS in Anal retentiveness when it comes to ideas and detail.. 1 Quote Link to comment
DatFan Posted May 7, 2012 Report Share Posted May 7, 2012 Now has subaru lsd diff fitted 4.4 ratio with billet stub axels and golf mk1 chin spoiler to be fitted. Also just got my american tail-lights (the triple square ones) to be painted and fitted (a very big thanks to dave if hes on this forum for sourcing and sending me them.) Will put up more pics as being modded. Nisman, that's a very clean and complete SSS you've got there - well worth your effort to take delivery! It's good to know that those tail-light bits are going on such a nice car. Looking forward to your progress pics. Quote Link to comment
zerow Posted May 11, 2012 Report Share Posted May 11, 2012 dobo, then you need to take a few pages from Zerows book. his sedan is the shit! he puts the ASS in Anal retentiveness when it comes to ideas and detail.. My ideas and detail are on the anal retentive side, but the outcome was way worth it. The car has to go beyond build and become a labor of love, then the fun can really begin. Quote Link to comment
ehime Posted May 15, 2012 Report Share Posted May 15, 2012 these 2 cars are officially my inspiration Bonvo I've seen this car before, any more piks and info on it. Very modified, and dually an inspiration! Quote Link to comment
bonvo Posted May 15, 2012 Author Report Share Posted May 15, 2012 unfortunatly thats the only pic of it i have found i wish i could find more Quote Link to comment
nisman Posted May 16, 2012 Report Share Posted May 16, 2012 Bonvo I've seen this car before, any more piks and info on it. Very modified, and dually an inspiration! thats one sweet looking datto, need to find more info on this vehicle Quote Link to comment
nisman Posted June 4, 2012 Report Share Posted June 4, 2012 got an early model dash for 180bsss at last. think it has been used in a late model before as the wiring on the back is soldered on (see pic) anyway will take to autoelecy to fit, hope it works. Got all these parts, I need to pull my finger out and fit them all. Quote Link to comment
ser240z Posted June 6, 2012 Report Share Posted June 6, 2012 So, I'm tired of seeing the 610 rot everyday and not having time to take care of her. Gonna get rid of her, but putting it up here before it goes into the for sale thread. '73 coupe, rough condition, motor is out, but I have all the pieces and then some. Had a lot of help from other members gathering pieces. Numbers matching L18, ported L16 (possibly built, haven't taken it apart), dual SU's, two webers, stock carb, great condition clock, solex locks, pedals to convert to manual trans, flywheel, couple of different gasket sets (timing and head I think), electronic dizzy, cut performance springs, two sets of stock springs, new real wheel cylinders, new pads and shoes, new brake master, possibly more. http://s467.photobuc...39/ser240z/610/ $1200 takes it all, bring your own wheels and something to tow it. If you want my wheels, black satin western minis with polished lips, just dirty, $1500. Price may be negotiable, maybe not. I'm just trying to get my money back and get her to a good home. If you don't like my post here, maybe a mod can move it. Thanks Scott Quote Link to comment
bonvo Posted June 6, 2012 Author Report Share Posted June 6, 2012 duuuuude sertiously sell me that spoiler ive been looking for one for years Quote Link to comment
nisman Posted June 7, 2012 Report Share Posted June 7, 2012 copies of that boot lid spoiler are to be made and distributed i know of at least 5 people who would want one! Quote Link to comment
bonvo Posted June 7, 2012 Author Report Share Posted June 7, 2012 if he sells it to me ill look into it Quote Link to comment
zerow Posted June 10, 2012 Report Share Posted June 10, 2012 Happy 610 Day! If you don't have one, find one. And if you see one, admire it. I plan to drive mine :thumbup: Quote Link to comment
MicroMachinery Posted June 11, 2012 Report Share Posted June 11, 2012 Indeed. Happy 6/10. Very happy 610 for Bonvo. Quote Link to comment
bonvo Posted June 14, 2012 Author Report Share Posted June 14, 2012 lol that it was man Quote Link to comment
Burabuda Posted July 1, 2012 Report Share Posted July 1, 2012 well bros looks like the goblin won't be at jccs this year .. Quote Link to comment
MicroMachinery Posted July 1, 2012 Report Share Posted July 1, 2012 Uh oh.. I don't like the look of that ".." Quote Link to comment
bonvo Posted July 1, 2012 Author Report Share Posted July 1, 2012 fuck what happened Quote Link to comment
zerow Posted July 2, 2012 Report Share Posted July 2, 2012 He will probably bring the other one... On a happier note, I WILL be there this year...registration #35! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.