compression Posted January 12, 2011 Report Share Posted January 12, 2011 This is my friend's RX-240. He is a die-hard datsun guy, but he decided to go different on this build. Everyone knows rotary engines and what a pain in the ass they can be. So my friend found this old RX-7 and pulled out the old wankel and put in a KA24DE. Granted, it took a couple years of spare time, but it is driving now. The interior is 100% stock RX-7. He managed to keep the A/C working, working dash (speedo, tach, all temp gauges). Not to mention he converted it to rack and pinion and added power steering to it. The install is very clean. There is a freshly rebuilt GSL-SE limited slip in there and completely rebuilt suspension with coilovers and camber plates, and swaybars and poly bushings. Not only is it much faster than the rotary ever could be, it gets better gas mileage and is much smoother and quieter. The custom rear GSL-SX badge is a sticker custom made for him by Todd at Graveyard Graphics (Creepy Cruiser) The future will bring a fully built turbocharged engine sporting a new BorgWarner EFR turbocharger and custom manifold. Anyway, just another interesting ride out there. Quote Link to comment
datzenmike Posted January 12, 2011 Report Share Posted January 12, 2011 I like it. Good swap. Quote Link to comment
thisismatt Posted January 12, 2011 Report Share Posted January 12, 2011 Nice, clean car! What intake manifold is that, and where's the turbo? :D Any pics of the install? Quote Link to comment
metalmonkey47 Posted January 12, 2011 Report Share Posted January 12, 2011 Super good looking car man . He did a damn good job. Quote Link to comment
ariascarlos1990 Posted January 12, 2011 Report Share Posted January 12, 2011 bad ass. Tell him he did a good job on it! Quote Link to comment
izzo Posted January 12, 2011 Report Share Posted January 12, 2011 Nice job on the HDR... Cool car too Quote Link to comment
compression Posted January 12, 2011 Author Report Share Posted January 12, 2011 Nice, clean car! What intake manifold is that, and where's the turbo? :D Any pics of the install? Not turbocharged yet, just N/A for now. EFR turbo's have an 8 week lead time, so it will be a while. The turbo motor is being built and M&B Cylinder Heads here in Portland. Xcessive Manufacturing makes those intake mani's, and some other cool KA stuff. http://www.xcessivemanufacturing.com/ Quote Link to comment
compression Posted January 12, 2011 Author Report Share Posted January 12, 2011 Nice job on the HDR... Cool car too No HDR, just messed with the levels/contrast/etc. Quote Link to comment
izzo Posted January 12, 2011 Report Share Posted January 12, 2011 No HDR, just messed with the levels/contrast/etc. Cool man! It has the look of hdr, and i thought for sure it was when i saw under the muffler in this pic. Good job none the less, that car is cool!\ Quote Link to comment
Wide14u Posted January 12, 2011 Report Share Posted January 12, 2011 it came out so nice Quote Link to comment
Mini-L320 Posted February 1, 2011 Report Share Posted February 1, 2011 "Not only is it much faster than the rotary ever could be" :huh: WHAT!! :hyper: Someone doesnt have faith in the Rotary Engine! -_- Quote Link to comment
Creepy Cruiser Posted February 2, 2011 Report Share Posted February 2, 2011 Wow, it came out cool dude. And thanks for the shout out on the badges. Quote Link to comment
Dave7 Posted February 3, 2011 Report Share Posted February 3, 2011 Very nice swap. What did he use for rack and pinion? I've had two 1st generation Rx-7s and they where just add perfect except for the steering box. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.