philcas1987 Posted April 23, 2011 Report Share Posted April 23, 2011 It's a sewing machine !!! See the close up very sexy. But dOnt show Kama Quote Link to comment
Stoffregen Motorsports Posted April 24, 2011 Report Share Posted April 24, 2011 We'll get that idle smoothed out and then you won't be able to tell the difference between that and your KA!!! Quote Link to comment
68Datsun510 Posted April 25, 2011 Author Report Share Posted April 25, 2011 I'd be happy to keep the engine running at idle with the headlights on!!! LOL Current idle is 1300rpm, headlight on, 900, highbeam, slow draw down to a shaky stall. Quote Link to comment
68Datsun510 Posted April 26, 2011 Author Report Share Posted April 26, 2011 'Stoffregenmotorsports' wasnt kidding! Corrected a few mechanic errors, (me, whoops!) and timing inaccuracies due to a cheap equus timing gun. THis thing ROMPS!!! Quote Link to comment
68Datsun510 Posted April 27, 2011 Author Report Share Posted April 27, 2011 Finished up some side stuff like the undertray, strut bar, etc. Built my oil pressure sensor remote mount! Grease gun hoses are 1/8 NPT on both ends, and have a working pressure of over 3000psi. Used it with some sealant in the block (retapped to 1/8 NPT in the rebuild process) then to a brass coupler to a sensor block. I think this will work out nicely! Dug this old pics up of my 68 in the good 'ol days! Avenue of the Giants on the north CA coast. ANd my awesome girlfriend bought this stuff as a surprise gift when i got the datsun road ready again! Quote Link to comment
68Datsun510 Posted April 27, 2011 Author Report Share Posted April 27, 2011 Need to re-do my valve adjustment tomorrow, get a cable throttle setup from a 620, as i hate this bellcrank crap, and it'll be completely awesome =) Quote Link to comment
the510keeper Posted April 27, 2011 Report Share Posted April 27, 2011 Cool Bubba back in a Datsun again! Quote Link to comment
68Datsun510 Posted April 27, 2011 Author Report Share Posted April 27, 2011 Hell yes! Almost forgot these, Its a 69, with original 69 turn signals, but, it has a 70+ valance panel... Should i??? Scored these for $4 at a swap meet. Should I? lol Awesome pro-Datsun Girlfriend bought an 8" bazooka tube, she likes the boom booms! fits perfectly in the foot well of the pass side! Works GREAT in such a small car =D Yeah, a 10" sub would be more powerful, but im not one to be obnoxious.........yet...... Quote Link to comment
banzai510(hainz) Posted April 27, 2011 Report Share Posted April 27, 2011 Corrected a few mechanic errors, (me, whoops!) and timing inaccuracies what were they? Quote Link to comment
68Datsun510 Posted April 27, 2011 Author Report Share Posted April 27, 2011 My timing gun reads 5 degrees more advanced than it really is, its a cheap equus. I have a craftsman digital one now. ANd the carb issue was when i rebuilt the weber, somehow, i swapped the primery and secondary jets... WHoops! Quote Link to comment
68Datsun510 Posted April 28, 2011 Author Report Share Posted April 28, 2011 Couple sweet pics =) Quote Link to comment
philcas1987 Posted April 28, 2011 Report Share Posted April 28, 2011 Nice dude!! Glad you're in a car now Quote Link to comment
68Datsun510 Posted April 30, 2011 Author Report Share Posted April 30, 2011 Installed an Accel Super Coil i had, works better!! 620 Pickup arm rest fits a 69 510! 50A OE Nissan 720 alt, it tested PERFECT! 4 speed shift knob from a Courier Is this a heat shield? I should install this... 42 years of service Quote Link to comment
Siqx20 Posted May 1, 2011 Report Share Posted May 1, 2011 I cant wait till i make some new door panals so i can put arm rests back in this bitch, Lookin good cody! Quote Link to comment
68Datsun510 Posted May 1, 2011 Author Report Share Posted May 1, 2011 Thanks Brandon, get with the oics posting on your build! Quote Link to comment
Siqx20 Posted May 1, 2011 Report Share Posted May 1, 2011 Havent done mutch to take pics of. been raining. thread is up to date yo! Quote Link to comment
68Datsun510 Posted May 1, 2011 Author Report Share Posted May 1, 2011 Haha cool =) Steve and Kyle are at the Bur. We should Join them. If distance and fuel werent an inhibitor... Quote Link to comment
Siqx20 Posted May 1, 2011 Report Share Posted May 1, 2011 yeah for real... o i miss gp. I will be moving back in june it looks like, Quote Link to comment
68Datsun510 Posted May 6, 2011 Author Report Share Posted May 6, 2011 Moving back? Why would you do such a thing? Its such a ...depression town...=( UPDATE Just did some cleaning up on my rear disc setup, had a nagging dragging brake issue (lol) every now and then the brakes would hang on a bit and cause drag. I suspect it was a sticking e brake cable, cant find anything else wrong. So, i posted OICS for all to see my 87 maxima rear brakes, mounted upside down to use factory brake cables, and brackets from Aaron Suchy. Quote Link to comment
Siqx20 Posted May 6, 2011 Report Share Posted May 6, 2011 I rather like gp. Lol hater Quote Link to comment
68Datsun510 Posted May 6, 2011 Author Report Share Posted May 6, 2011 I like GP a lot too! I was only referring to the availability of work there. Almost everyone i know is unemployed it seems :/ Quote Link to comment
WAGON JON Posted May 6, 2011 Report Share Posted May 6, 2011 Unemployed you say? Quote Link to comment
Siqx20 Posted May 7, 2011 Report Share Posted May 7, 2011 o well i can do my job from home so im taking my work down there ;) Quote Link to comment
68Datsun510 Posted May 7, 2011 Author Report Share Posted May 7, 2011 Jon, yeah, most people i know in GP is, maybe things have changed since my last trip. Brandon, sweet! Quote Link to comment
68Datsun510 Posted May 7, 2011 Author Report Share Posted May 7, 2011 Some pics from the SacDatsun meet Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.