jesusno2 Posted November 1, 2010 Author Report Share Posted November 1, 2010 we bought a gasket kit and it came with 2 different gaskets i assumed it was a truck gasket and someone else posted up the same gasket once before. icehouse house said it can be made to work but the pan hits the girdle. ohh well its kinda late now steering is close to being done. Quote Link to comment
jesusno2 Posted November 7, 2010 Author Report Share Posted November 7, 2010 Steering finished. Intake modded, alt hooked up. harness cleaned up/tied up fuel system is plumbed, need to hook up radiator hoses and exhaust and we can fire it up. still need a driveshaft. Quote Link to comment
banginheep Posted November 18, 2010 Report Share Posted November 18, 2010 As the owner of this nisota I think it deserves a bump! Quote Link to comment
510kevin Posted November 18, 2010 Report Share Posted November 18, 2010 im jealous......i donthave a ka in my 510 and you have one in a TOYOTA!!!!!!!! :D Quote Link to comment
lil89ram50 Posted November 20, 2010 Report Share Posted November 20, 2010 any updates? Quote Link to comment
metalmonkey47 Posted November 20, 2010 Report Share Posted November 20, 2010 As the owner of this nisota I think it deserves a bump! GTFO of the forums until you have moar pictures of this! Quote Link to comment
jesusno2 Posted November 20, 2010 Author Report Share Posted November 20, 2010 More pics to come tomorrow eve maybe even a video! Quote Link to comment
jesusno2 Posted November 21, 2010 Author Report Share Posted November 21, 2010 VIDEO!!!! BITCHES got some timing to get sorted out and get everything set. http://www.youtube.com/user/TheJesusno2?feature=mhum Quote Link to comment
Icehouse Posted November 21, 2010 Report Share Posted November 21, 2010 Looks to be running smooth. Great to hear! Quote Link to comment
jesusno2 Posted November 29, 2010 Author Report Share Posted November 29, 2010 Well we finally got a shifter. for the tranny clutch hooked up and bled. Speedo gear swapped to a manual one. I made my own drive shaft Too! between a nissan yoke and a yota shaft. And god damn is it damn near perfect! I got a touch of vibration about 80mph and I'm not even sure that was from the drive shaft. first test drive of the truck and the goddamn clutch slips :angry: :angry: :angry: I looked at the disc before we put the powertrain in too! I'm pretty sure the pressure plate is weak, But heres a pic next to my goon in the dark with 2 ka's running! My driveshaft Quote Link to comment
WAGON JON Posted December 3, 2010 Report Share Posted December 3, 2010 I just found this page. Awesome swap! Nothing like a little bass-ackwardness to get something done! :D Quote Link to comment
jesusno2 Posted December 3, 2010 Author Report Share Posted December 3, 2010 Got a exedy clutch yesterday hopefully to get it in this weekend truck is supposed to get aligned sat also hope to get some more video up asap. Quote Link to comment
banginheep Posted December 6, 2010 Report Share Posted December 6, 2010 Update: the clutch is getting sidelined till we figure out whats wrong with the tranny. whines and sounds like piss until you push the clutch in. dont know if its the pilot bushing or the input shaft bearing or the tranny is just shot, dont think its the throwout bearing since it makes the noise with tranny engaged when the throwout should just be sitting there, but im not a expert and could be completely wrong lol. Quote Link to comment
]2eDeYe Posted December 6, 2010 Report Share Posted December 6, 2010 Sounds like the throwout to me. Quote Link to comment
WAGON JON Posted December 8, 2010 Report Share Posted December 8, 2010 more oics! Quote Link to comment
yello620 Posted December 8, 2010 Report Share Posted December 8, 2010 2eDeYe' date='06 December 2010 - 07:22 AM' timestamp='1291648963' post='388265']Sounds like the throwout to me. X 2 Quote Link to comment
banginheep Posted December 9, 2010 Report Share Posted December 9, 2010 I hope its not bad, its brand new Quote Link to comment
]2eDeYe Posted December 9, 2010 Report Share Posted December 9, 2010 Did you pack it with grease? For some reason the last couple of throw out's I've installed had to be greased... <_< Quote Link to comment
jesusno2 Posted December 9, 2010 Author Report Share Posted December 9, 2010 Packing it with grease seems odd man, wouldn't that sling shit all over the clutch? I've driven the truck a few times now I'm pretty convinced their is some bad bearings and some banged up syncros in the trans cause it won't make a noise in 4th gear which is a direct drive 1.1 ratio Quote Link to comment
]2eDeYe Posted December 9, 2010 Report Share Posted December 9, 2010 Not if you pack it and then wipe it down. I've been running the same throwout in my CJ5 for 3 clutches because the ones they sell in the kit aren't even the correct ones. I just repack it wipe it down and install, no problem. The last new one I installed in my G35 without greasing makes noise till it get's warmed up. That's what we get for moving manufacturing to china :unsure: Quote Link to comment
jesusno2 Posted December 10, 2010 Author Report Share Posted December 10, 2010 2eDeYe' date='09 December 2010 - 12:44 PM' timestamp='1291927499' post='389655']Not if you pack it and then wipe it down. I've been running the same throwout in my CJ5 for 3 clutches because the ones they sell in the kit aren't even the correct ones. I just repack it wipe it down and install, no problem. The last new one I installed in my G35 without greasing makes noise till it get's warmed up. That's what we get for moving manufacturing to china :unsure: Oh man dude, dont get me started on my china rant! jesus christ seriously packing grease into the throw out seems crazy! Well either way ive had fucked up throwout bearings, and Ive had bad transmissions. This trans has been hammered on I'm sure some kid owned the car. the motor runs pretty amazing though so cant complain to much. Quote Link to comment
DISLEXICDIME Posted December 10, 2010 Report Share Posted December 10, 2010 Just run 80/90 in the trans till you get a new one . Quote Link to comment
Sealik Posted December 10, 2010 Report Share Posted December 10, 2010 Hehe yea, Hilux's are TOUGH: You may or may not have seen this, but.... http://www.youtube.com/watch?v=uTqIVESk2vg http://www.youtube.com/watch?v=hy8tkIYs4xY&NR=1 :P First video is blocked Quote Link to comment
WAGON JON Posted December 26, 2010 Report Share Posted December 26, 2010 Ok, whats the latest on this project? Need updates! :rolleyes: Quote Link to comment
jesusno2 Posted December 26, 2010 Author Report Share Posted December 26, 2010 Well its pretty much finished someday find a different trans maybe a few other do dads but that's about it. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.