q-tip Posted August 3, 2013 Report Share Posted August 3, 2013 That looks pretty much like a standard 510 rear view mirror Quote Link to comment
Datsunrider71 Posted August 3, 2013 Report Share Posted August 3, 2013 Ohhh I was asking cuz it has a night and day thing my other mirror didn't have that Quote Link to comment
Busta Nut Posted August 3, 2013 Report Share Posted August 3, 2013 Looks like the one in my 240z... Quote Link to comment
q-tip Posted August 3, 2013 Report Share Posted August 3, 2013 I didn't notice the night day thing, could be a Z , or maybe it was an option? Quote Link to comment
freekwonder Posted August 3, 2013 Report Share Posted August 3, 2013 Disconnected my IACV and can now idle below 1000 rpms and gained some driveability. Also replaced and tightened up my transmission mount bolts. Now I just need to source a new 1/4 window latch, one of mine broke :-( Quote Link to comment
Datsunrider71 Posted August 3, 2013 Report Share Posted August 3, 2013 Yeah guys is off a Z I just found out. Maybe it was a option but its cool lil thing. Quote Link to comment
TheShagginWagon Posted August 3, 2013 Report Share Posted August 3, 2013 New headlight switch and repainted my set of dash vents Quote Link to comment
jrock4224 Posted August 4, 2013 Report Share Posted August 4, 2013 i borrowed some parts for my wagon from a 610 Quote Link to comment
Tristin Posted August 4, 2013 Report Share Posted August 4, 2013 Now I just need to source a new 1/4 window latch, one of mine broke :-( There always seems to be some on eBay. Quote Link to comment
freekwonder Posted August 5, 2013 Report Share Posted August 5, 2013 There always seems to be some on eBay. yeah, but I'm a cheap bastard lol. Luckily I was able to rig it up to work for now. Quote Link to comment
edekalil Posted August 8, 2013 Report Share Posted August 8, 2013 Replaced the clutch master cylinder on my 70 two door 510 and got stuck trying to disconnect the hose going to the slave cylinder. I plan to go at it again this next weekend when I get back till it is done and I have a clutch working. Then I just have to get all the brake's working and start driving it again. Eddie Quote Link to comment
zianian Posted August 8, 2013 Report Share Posted August 8, 2013 Did my first burn outs in my baby... times a bunch. Just testing the posi. It works. Also did my first donuts. 3 I think. Just "seating" new fluid into diff gears/clutches/whatever. That worked too. Quote Link to comment
Busta Nut Posted August 9, 2013 Report Share Posted August 9, 2013 -Adjusted e-brake -polished top of radiator -adjusted clutch -wiped down engine bay -cleaned carbs -...and gave her a bath... Windows & vacuuming in the a.m............. Quote Link to comment
q-tip Posted August 9, 2013 Report Share Posted August 9, 2013 Was a couple days ago but I installed my ATP short throw shifter Quote Link to comment
zianian Posted August 10, 2013 Report Share Posted August 10, 2013 Was a couple days ago but I installed my ATP short throw shifter All business... no frills. Sweet Quote Link to comment
q-tip Posted August 10, 2013 Report Share Posted August 10, 2013 All business... no frills. Sweet Its stripped down about as far as it can be and still be a function able daily driver in my opinion Quote Link to comment
skyblue Posted August 10, 2013 Report Share Posted August 10, 2013 polished radiator Quote Link to comment
freekwonder Posted August 10, 2013 Report Share Posted August 10, 2013 Was a couple days ago but I installed my ATP short throw shifter Need to check this out, want one so bad, but I'm broke at the moment. As for me: Took for a nice drive around Tacoma Put on a $13 door mirror from Baxter automotive And started on her roof rack. Quote Link to comment
edekalil Posted August 11, 2013 Report Share Posted August 11, 2013 Got the cluch working, now I have to get on the brakes. Quote Link to comment
scooter stuff Posted August 12, 2013 Report Share Posted August 12, 2013 installed my motor. 1 Quote Link to comment
walpal Posted August 13, 2013 Report Share Posted August 13, 2013 I made a gas pedal. No more stepping on the little rod thing. woo hoo. :) 1 Quote Link to comment
Roz Posted August 13, 2013 Report Share Posted August 13, 2013 I made a gas pedal. No more stepping on the little rod thing. woo hoo. :) I need to do this. Any pictures of the back side? (The pedal, not your backside) Quote Link to comment
MARS 510 Posted August 13, 2013 Report Share Posted August 13, 2013 I need to do this. Any pictures of the back side? (The pedal, not your backside) OH HELL YEAH!!! show us the back side lol!!! Quote Link to comment
walpal Posted August 13, 2013 Report Share Posted August 13, 2013 OK, I get it, this isn't the thread Post-AS(s) thread :rofl: Well please excuse my ugly welds but this is how I did it... Bent up the back side to fit the rod. Had to grind out a bit on the rod to get the bolt to go through. Did a spot weld in the center and ground it down. It does swivel a little but I was going to run it for a while and see if I preferred it at particular angle and maybe lock it in at that setting. Quote Link to comment
MARS 510 Posted August 14, 2013 Report Share Posted August 14, 2013 OK, I get it, this isn't the thread Post-AS(s) thread :rofl: Well please excuse my ugly welds but this is how I did it... Bent up the back side to fit the rod. Had to grind out a bit on the rod to get the bolt to go through. Did a spot weld in the center and ground it down. It does swivel a little but I was going to run it for a while and see if I preferred it at particular angle and maybe lock it in at that setting. NICE!!! LOL!! thanks for the pics..let me see if can fabricate one for mine... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.