Datsunrider71 Posted July 26, 2013 Report Share Posted July 26, 2013 Going to start my head gasket bra!! REAL GREASERS DON'T MIND WORKING IN THE RAIN YOU DIGZZZZ Quote Link to comment
67_1600 Posted July 26, 2013 Report Share Posted July 26, 2013 What's that center console off of? It's out of a 720 and fits very well. It's a tad too wide in the rear but nothing a little extra padding under the carpet won't fix. It does cover the vent below where the air would blow into the cabin, but I'm planning on adding some vents and duct work to fix that. Quote Link to comment
Datsunrider71 Posted July 26, 2013 Report Share Posted July 26, 2013 It's out of a 720 and fits very well. It's a tad too wide in the rear but nothing a little extra padding under the carpet won't fix. It does cover the vent below where the air would blow into the cabin, but I'm planning on adding some vents and duct work to fix that. It looks fresh bro I like it I'm going to keep on the look out for one of those Quote Link to comment
zianian Posted July 26, 2013 Report Share Posted July 26, 2013 speaking of center consoles... Good old cardboard, tape, wood & glue and a touch of Velcro. and paint... can't forget the paint. Flat Black of course. I'm taking orders btw. Act now. Quote Link to comment
Just Joel Posted July 26, 2013 Report Share Posted July 26, 2013 What, no cup holder? Quote Link to comment
zianian Posted July 26, 2013 Report Share Posted July 26, 2013 lol I was just thinking yesterday Joel.... No cups allowed. I do have a water bottle though. It's "mounted" in the stuff tray that sits on the passenger seat. It's own lil cardboard cubby. Everything has a cubby in that lil' passanger try. Lighter, ciggy tin/ashtray, needlenose ciggy roach pliers, mifi, android/pod, napkin cubby, garage door opener clip slot. tobbacoo doperware holder, change box, zip ties, tape, head unit remote. I think that's it. It's all there. Quote Link to comment
nb6179505 Posted July 28, 2013 Report Share Posted July 28, 2013 so i stripped the inside of the foam adhesive the PO had put down, took out the seats, took of the door panels and the headliner... this is what lies beneath... How should I proceed, thinking of soda blasting/ sand blasting the inside and outside, patching up the holes in the floors and painting...do you guys think it's worth blasting inside? whats the cost of blasting inside and outside? and would i need to take out the dash, gas tank, and engine? Not really looking to have the engine bay blasted, it looks fine Quote Link to comment
Tristin Posted July 28, 2013 Report Share Posted July 28, 2013 Cant say I like the clean rear markers, but everything else looks fantastic. Green paint and Euro tails look so good together. Quote Link to comment
Big_E-Dog Posted July 28, 2013 Report Share Posted July 28, 2013 relocated thr fuse box, installed es300 hood dampners (no more stick!) thats all for now... Quote Link to comment
oldgasman Posted July 30, 2013 Report Share Posted July 30, 2013 Put this motor in today. Quote Link to comment
macgyver Posted July 30, 2013 Report Share Posted July 30, 2013 Made a carbon fiber back plate for behind my light/wiper knobs.... 1 Quote Link to comment
Son_of_a_Datsun_Guy Posted July 30, 2013 Report Share Posted July 30, 2013 ^ that's a nice detail, very cool Quote Link to comment
edekalil Posted July 31, 2013 Report Share Posted July 31, 2013 Ordered couch master cylinder and slave to got one of my 510s shifting, next get the brakes up and working. Eddie Quote Link to comment
Just Joel Posted July 31, 2013 Report Share Posted July 31, 2013 I broke it ;( :( Quote Link to comment
Trophy24 Posted August 1, 2013 Report Share Posted August 1, 2013 Body work... Sand sand sand. Repeat! Quote Link to comment
Tristin Posted August 2, 2013 Report Share Posted August 2, 2013 Cleaned up some more dash wiring, cleaned up the interior (I had parts and trash everywhere while I have been working on it the last couple weeks), started my 32/36 rebuild with a Pine-Sol bath, and merged my two sets of side markers together until I can find a nice set of USDM ones. Quote Link to comment
TheShagginWagon Posted August 2, 2013 Report Share Posted August 2, 2013 On the 4 door project, I dropped the whole rear end to swap in a slotted rear crossmember, subie r160, and possibly rear coilovers :) Quote Link to comment
DatMo Posted August 2, 2013 Report Share Posted August 2, 2013 Took off the metal pieces around my lights and sanded em up a bit. I thought there was rust? but then i put some paint remover on it and it cleared right up. I also took off both my lights because i plan to plasti-dip the rear. I'll post pics when done. i hope it's nice. Quote Link to comment
zianian Posted August 2, 2013 Report Share Posted August 2, 2013 I dreamt at it. Quote Link to comment
Datsunrider71 Posted August 3, 2013 Report Share Posted August 3, 2013 I put this on today And this cool looking Mirror can some one tell me What Datsun this comes off Quote Link to comment
Son_of_a_Datsun_Guy Posted August 3, 2013 Report Share Posted August 3, 2013 Where'd you source that bumper trim piece? Just a swap meet find? Been looking for one of those since I got the car. Quote Link to comment
Datsunrider71 Posted August 3, 2013 Report Share Posted August 3, 2013 Where'd you source that bumper trim piece? Just a swap meet find? Been looking for one of those since I got the car. I got it from my friend Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.