Sparkys datsun Posted April 28, 2021 Report Share Posted April 28, 2021 Looking for parts, needs seats, brake booster and steering rack for now thx 1 Quote Link to comment
720_Jeff Posted April 28, 2021 Report Share Posted April 28, 2021 You'll probably be redirected to the classifieds. By your profile description, you're in the NW, so assuming Oregon/Washington. There are plenty of trucks in that area, which I'd assume plenty of parts trucks or trucks in the junkyards. That would be your best bet. There are at least a few guys parting out trucks in the PNW. If you refine your location, they may be inclined to respond to you 1 Quote Link to comment
Charlie69 Posted April 28, 2021 Report Share Posted April 28, 2021 A more accurite location helps members help you. Quote Link to comment
datzenmike Posted April 28, 2021 Report Share Posted April 28, 2021 17 hours ago, Sparkys datsun said: Looking for parts, needs seats, brake booster and steering rack for now thx https://ratsun.net/classifieds/category/9-datsun-parts/ 1 Quote Link to comment
Sparkys datsun Posted April 30, 2021 Author Report Share Posted April 30, 2021 I'm in southern oregon and I've called all the local junkyards and they got nothing 1 Quote Link to comment
Lockleaf Posted April 30, 2021 Report Share Posted April 30, 2021 These trucks don't have a steering rack. Are you referring to the steering box? It turns the pitman arm. 2 Quote Link to comment
bottomwatcher Posted April 30, 2021 Report Share Posted April 30, 2021 Do what everybody else does and retrofit what you need if your handy. My 82 720 has 2003 power maxima seats, 2005 dual diaphragm booster from a frontier, KAe, c series trans. Honda parts in the power steering ect. You handy? Quote Link to comment
yenpit Posted April 30, 2021 Report Share Posted April 30, 2021 I have a 1980 2WD parts truck. I have the brake booster & the NON power steering box. Both still in a pretty clean 77k mile truck that was wrecked, so pretty good chance they are good parts! PM if interested! You will want to figure out a seat or seats regionally, cuz would need to ship via truck freight otherwise 😆. A KC has more room for the seat(s) to go back further, so you should be able to fit just about any mini truck bench (narrower than mid size) & just about any pair of buckets! We us lots of Honda Acura buckets in 510's. You will likely need to fabricate how something mounts, unless it is a factory seat for the truck. 1 Quote Link to comment
bottomwatcher Posted April 30, 2021 Report Share Posted April 30, 2021 Any seats is a little misleading. These trucks need seats that sit very low and to do it right might need a little fab work. Just search the forums for seat ideas. It has been covered dozens of times on here. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.