Kelly Posted December 10, 2020 Report Share Posted December 10, 2020 I need to replace/fix the following for my ‘71 521: 1. bulb for my dome light Does anyone know the part number? 2. windshield Where can I get one? 3. fuel gauge does not work How does one fix this issue? 4. wiper fluid (pump) Where can I get one? 5. tool to take spare tire off from under the pickup Where can I get one? I am located on the coast in Washington. Quote Link to comment
datzenmike Posted December 10, 2020 Report Share Posted December 10, 2020 1/ room lamp 26410-04100 optional room lamp used with door switch 26410-04400 or take the old one in to NAPA have hem match it up. 2/ Want ad?... https://ratsun.net/classifieds/category/9-datsun-parts/ 3/ Does the temperature gauge work? they both use the same power supply. If temp gauge works look under the passenger seat, on the floor is a connector with 6 wires exiting through the floor for all the rear lighting and the fuel sender in the tank. Unplug the connector, find the solid yellow wire and ground it with the ignition on. Gauge should read FULL. If no reading the gauge is probably bad. If it does read full re-connect and follow the yellow wire to the top of the fuel tank. Clean as best you can and make sure the yellow wire is not broken or hit by a rock and is connected to the terminal on the sender. Beside it is the BLACK ground wire and if it is broken or corroded away the tank won't read either. Make sure it's solidly grounded. It's hard to get at but if you can't see anything wrong you'll have to take the tank out to really get at the sender. Terminals are likely corroded and/or loose and not making contact 4/ Want ad? https://ratsun.net/classifieds/category/9-datsun-parts/ Auto parts store may have universal pump. 1 Quote Link to comment
DanielC Posted December 10, 2020 Report Share Posted December 10, 2020 On a 521 wires to fuel tank, taillights, and transmission goes under the cab floor, not in the cab. 1 Quote Link to comment
datzenmike Posted December 10, 2020 Report Share Posted December 10, 2020 You're saying not through the floor?? Where does it come from? the engine bay? It's been a long time 35 years since I had mine. My 620 went through the floor. Quote Link to comment
DanielC Posted December 10, 2020 Report Share Posted December 10, 2020 521, under the cab floor. 620 through the cab. Thread title, 1971 521. 1 1 Quote Link to comment
Stinky Posted December 11, 2020 Report Share Posted December 11, 2020 The spare tire tool....made mine for my 720. 3/8" rod....i dont remember what I did for the end, but it involved some .5" wide flatstock (twas what I had). I mighta cut a slot in the end and slipped it in there and welded it in Quote Link to comment
KELMO Posted December 13, 2020 Report Share Posted December 13, 2020 Let's see if we can solve this spare tire tool once and for all. The spare tire holder design with the chain that lowers the tire from under the vehicle has been used by Nissan almost forever. It is used on 510 wagons and any other wagon I would think. All trucks up to the Frontier and Titan and also includes the Xterra. The "T" handle, rods, and lug wrench are out of a 2014 Frontier. These parts are still available from Nissan "T" handle 99552-7S000 $8.70 EXTENSION ROD 99552-7S210 $8.63 (MAY REQUIRE 2) LUG WRENCH $12.72 (should be a 21MM) I hope this helps. Just about any Nissan that has a spare tire stored under the vehicle uses this. Should be able to find in a junk yard or purchased from your local Nissan dealer for about 40 bucks plus tax Quote Link to comment
datzenmike Posted December 13, 2020 Report Share Posted December 13, 2020 At least every year let it down and rub the chain with grease on a rag. Nothing like a flat in the rain and the spare won't budge because it's been rusting up under there for 40+ years with the original Bridgstone 6:00 X14 6 ply nylon tire. Quote Link to comment
yenpit Posted December 21, 2020 Report Share Posted December 21, 2020 On 12/13/2020 at 1:20 PM, KELMO said: Let's see if we can solve this spare tire tool once and for all. The spare tire holder design with the chain that lowers the tire from under the vehicle has been used by Nissan almost forever. It is used on 510 wagons and any other wagon I would think. All trucks up to the Frontier and Titan and also includes the Xterra. The "T" handle, rods, and lug wrench are out of a 2014 Frontier. These parts are still available from Nissan "T" handle 99552-7S000 $8.70 EXTENSION ROD 99552-7S210 $8.63 (MAY REQUIRE 2) LUG WRENCH $12.72 (should be a 21MM) I hope this helps. Just about any Nissan that has a spare tire stored under the vehicle uses this. Should be able to find in a junk yard or purchased from your local Nissan dealer for about 40 bucks plus tax Wow, great info! I have two different long rods, different lengths, but most importantly different square ends.............one noticeably bigger square! I noticed this a few months ago digging thru my parts, but never researched why the difference...........maybe truck vs 510 Wagon? I assume these Titan parts are compatible with the 521? Quote Link to comment
KELMO Posted December 23, 2020 Report Share Posted December 23, 2020 These were out of my Frontier but the part #'s indicate Titan application. The different rod lengths and different square end is odd and I do not recall ever seeing that. I also have to assume they are compatible with the 521 but I do not have one to try the theory out on. Now, If someone should choose to loan me their 521 I could research this and find out. I'll only need it for about a month.😄 Quote Link to comment
banzai510(hainz) Posted December 23, 2020 Report Share Posted December 23, 2020 he never posted since. Must mot be a priority Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.