datzenmike Posted May 30, 2018 Report Share Posted May 30, 2018 I used 240sx down pipes. Had to narrow the ends to 1.5" to fit the L16 manifold. Used a Mike Klotz exhaust flange leaving the sx pipes sticking up so they fit up inside the manifold. The 240sx and the L series use a similar transmission so the bends are all in the right places. From exhaust valve to where the two pipes join is over 30" so it's half way a long tube header. 2 Quote Link to comment
MikeRL411 Posted May 30, 2018 Report Share Posted May 30, 2018 I think I am going to order one of those 240sx pipr to header gaskets. Superficially looks like an RL411 NLA gasket to me. I have been cutting and patching 2 each 510 gaskets as a substitute. 1 Quote Link to comment
datzenmike Posted May 31, 2018 Report Share Posted May 31, 2018 The flange on the 240sx pipes that I mentioned was slightly larger than the MKlotz flange for the L16. It would not bolt up to the L16 manifold. The pipes are slightly wider apart also. The gear clamp in the top picture was to pull them together. I had to grind the holes in the L 16 flange larger for the KA pipes. 1 Quote Link to comment
aquilesopkarg Posted June 17, 2020 Report Share Posted June 17, 2020 I never got it to seal for shit. And the secondary reverse image search email checker port checker pipe itself hangs very low if I remember correctly. Quote Link to comment
scooter Posted January 24, 2021 Report Share Posted January 24, 2021 i had one of these too, had to belt sand the fuck out of it to get it flat. the port match is terrible. fix those two things and its half okay. I ran it for a couple years then got my hands on a nissan comp header. The car picked up a bunch of top end power. that green gasket material is the bomb though, if anyone knows where to get a big blank chunk of that stuff let me know. 1 Quote Link to comment
bilzbobaggins Posted January 25, 2021 Report Share Posted January 25, 2021 thermoseal klingersil c-4401 equalseal.com 1 Quote Link to comment
Stoffregen Motorsports Posted January 30, 2021 Report Share Posted January 30, 2021 Remflex is the buzz word these days. Here's a sheet of it on Amazon - https://www.amazon.com/Remflex-GS16511-Gasket-Sheet/dp/B006G30D6Q/ref=asc_df_B006G30D6Q/?tag=hyprod-20&linkCode=df0&hvadid=312684231807&hvpos=&hvnetw=g&hvrand=18351489539831013690&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9032555&hvtargid=pla-570207614090&psc=1&tag=&ref=&adgrpid=60983009663&hvpone=&hvptwo=&hvadid=312684231807&hvpos=&hvnetw=g&hvrand=18351489539831013690&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9032555&hvtargid=pla-570207614090 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.