hosestop@msn.com Posted October 9, 2018 Report Share Posted October 9, 2018 People want s14 s15 NA s Bleach lately smooth power . You must bolt sr and trans as one to install , recently tried a removable tunnel , to remove seat and pull trans tail shaft into cabin for a clutch job later maybe , I think better than pulling motor and trans and split on ground to do a clutch job ! Not new idea ,Nissan had removable tunnel /floor on early trucks ,(60-64) and Mercedes did this also. 1 Quote Link to comment
hosestop@msn.com Posted October 9, 2018 Report Share Posted October 9, 2018 (edited) Edited October 9, 2018 by hosestop@msn.com 1 Quote Link to comment
hosestop@msn.com Posted October 9, 2018 Report Share Posted October 9, 2018 It also needed raised and shifter can be lined up with booty. Quote Link to comment
5t341tH Posted November 4, 2018 Report Share Posted November 4, 2018 Anybody have more pics of the motor mounts bolted up? I’m having Trouble lining mine up. Also engine mounts I have are two diff thicknesses, so I bought multiples Quote Link to comment
]2eDeYe Posted January 18, 2019 Author Report Share Posted January 18, 2019 New cross member for the 620 KA SR swap. 1 Quote Link to comment
nustad620 Posted February 14, 2019 Report Share Posted February 14, 2019 So with these mounts do you need to relocate the frame mounts? Or do these compensate for the misalignment with offset? I'd like to see more about that crossmember. Is it in production yet? Quote Link to comment
AtomChurch Posted February 16, 2019 Report Share Posted February 16, 2019 On 2/14/2019 at 10:55 AM, nustad620 said: So with these mounts do you need to relocate the frame mounts? Or do these compensate for the misalignment with offset? I'd like to see more about that crossmember. Is it in production yet? Which misalignment are you referring to? The front to back offset of the trans mounting points? Quote Link to comment
datzenmike Posted February 16, 2019 Report Share Posted February 16, 2019 On 2/14/2019 at 10:55 AM, nustad620 said: So with these mounts do you need to relocate the frame mounts? Or do these compensate for the misalignment with offset? I'd like to see more about that crossmember. Is it in production yet? I think it's clear this is for swapping SR and KA engine into the 620. On 2/21/2018 at 9:49 AM, ]2eDeYe said: Finally have a production run done. SR20DE to 620 Motor Mounts. Other than these mounts and relocating the alternator, this swap is the same as the 240SX KA24 swap. The slotted trans cross member probably allows either the longer 240sx or the shorter D21 5 speed is my guess. 2 Quote Link to comment
]2eDeYe Posted February 17, 2019 Author Report Share Posted February 17, 2019 On 2/14/2019 at 1:55 PM, nustad620 said: So with these mounts do you need to relocate the frame mounts? Or do these compensate for the misalignment with offset? I'd like to see more about that crossmember. Is it in production yet? No, bolt in. It essentially allows you to run the longer KA or SR trans I have sold a few crossmember already, will have a run through powder coat soon. Quote Link to comment
nustad620 Posted March 2, 2019 Report Share Posted March 2, 2019 On 2/15/2019 at 9:56 PM, AtomChurch said: Which misalignment are you referring to? The front to back offset of the trans mounting points? I don't know much about swapping a ka or sr into a 620, I just started the research. But a few builds I've read the engine cross member had to be moved forward to get the new mounts to line up. So what I was asking is are the mounts just bolt in and drop the engine in. Quote Link to comment
SlowAndRusty Posted April 10, 2019 Report Share Posted April 10, 2019 Did you end up making a bracket for the alternator? I’ll be doing the SR swap in my 620 around this time next year, and I definitely will be purchasing your brackets and crossmember if they’re still available. 1 Quote Link to comment
]2eDeYe Posted April 10, 2019 Author Report Share Posted April 10, 2019 On 3/1/2019 at 4:56 PM, nustad620 said: I don't know much about swapping a ka or sr into a 620, I just started the research. But a few builds I've read the engine cross member had to be moved forward to get the new mounts to line up. So what I was asking is are the mounts just bolt in and drop the engine in. Sorry I missed this, not getting notifications. grrr Well the order is more like drop the engine in place, install all of the mounts and make sure all of the bolts are started before final tightening and then dropping the engine/trans the rest of the way... but yes, bolt in. 12 minutes ago, SlowAndRusty said: Did you end up making a bracket for the alternator? I’ll be doing the SR swap in my 620 around this time next year, and I definitely will be purchasing your brackets and crossmember if they’re still available. I am am about to build the first couple to test. Will do a production run if they work out. :) 1 Quote Link to comment
SlowAndRusty Posted April 10, 2019 Report Share Posted April 10, 2019 Awesome! Definitely will be following for updates! 1 Quote Link to comment
Eric Posted September 3, 2019 Report Share Posted September 3, 2019 So how did the alternator bracket work out? Interested in a set of motor mounts and trans mount but it would be nice if i can get an alternator bracket in one go. Quote Link to comment
dyt620 Posted September 17, 2019 Report Share Posted September 17, 2019 Are these still available? Would be keen on a set to a SR20 N/A Autech into a 620, all the way downunder in Australia. Cheers Quote Link to comment
]2eDeYe Posted September 17, 2019 Author Report Share Posted September 17, 2019 They are available, I need to do another run. Shipping to Australia is pretty expensive. I have someone else asking for parts shipped to Aus as well, maybe I can package them together? Quote Link to comment
]2eDeYe Posted September 17, 2019 Author Report Share Posted September 17, 2019 On 9/3/2019 at 1:10 PM, Eric said: So how did the alternator bracket work out? Interested in a set of motor mounts and trans mount but it would be nice if i can get an alternator bracket in one go. I have the alternator bracket design finalized. Will be picking up the plates from the laser cutter this week. 1 Quote Link to comment
RAT SUN Posted January 20, 2020 Report Share Posted January 20, 2020 Do have any Sr20de Datsun 521 motor mounts in stock ? Quote Link to comment
]2eDeYe Posted January 22, 2020 Author Report Share Posted January 22, 2020 I am about to. PM Sent. Quote Link to comment
Dre620 Posted July 30, 2020 Report Share Posted July 30, 2020 On 2/21/2018 at 12:49 PM, ]2eDeYe said: Finally have a production run done. SR20DE to 620 Motor Mounts. Other than these mounts and relocating the alternator, this swap is the same as the 240SX KA24 swap. PM sent about mounts. Quote Link to comment
Kami04 Posted December 6, 2023 Report Share Posted December 6, 2023 Messages about your mounts would like to get everything available or some guidance pls Quote Link to comment
]2eDeYe Posted December 6, 2023 Author Report Share Posted December 6, 2023 6 hours ago, Kami04 said: Messages about your mounts would like to get everything available or some guidance pls Replied to your message. 🙂 Quote Link to comment
Datsr20 Posted August 10 Report Share Posted August 10 Hi guys first time here I’m from the uk and im looking to purchase a 620 next year and want to put a sr20det in so im hoping that I can still get hold of the parts needed from 2eDeYe 1 Quote Link to comment
]2eDeYe Posted August 10 Author Report Share Posted August 10 18 minutes ago, Datsr20 said: Hi guys first time here I’m from the uk and im looking to purchase a 620 next year and want to put a sr20det in so im hoping that I can still get hold of the parts needed from 2eDeYe Just PM me when you are ready. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.