Eagle_Adam Posted December 11, 2013 Author Report Share Posted December 11, 2013 Ill just leave this here 8 Quote Link to comment
heretic Posted December 11, 2013 Report Share Posted December 11, 2013 badass Adam.!!! 1 Quote Link to comment
Eagle_Adam Posted December 11, 2013 Author Report Share Posted December 11, 2013 These went in the rear And these went in the front Took these out Next up: Finish the centerlink swap 3 Quote Link to comment
Eric Garside Posted December 11, 2013 Report Share Posted December 11, 2013 Did you find someone local to redo your tapers? What are you doing with the exhaust? What size are you going with? Love those disks on the back!! Are still going to run your ebrake? Quote Link to comment
Eagle_Adam Posted December 11, 2013 Author Report Share Posted December 11, 2013 I'm having my machinist look at the taper flip tomorrow, he said he has the welder a but isn't sure about the correct taper but without a direct comparison The exhaust will stay until I have the funds to redo it, for now in just gunna tie Into my current 2 in system The ebrake will get figured out after I have the truck running again, it doesn't look difficult to hook up Quote Link to comment
jrock4224 Posted December 12, 2013 Report Share Posted December 12, 2013 I failed... just stripped the pulley and started over ..... it got worse before I started over so I just started over.... Quote Link to comment
Eagle_Adam Posted December 12, 2013 Author Report Share Posted December 12, 2013 Not a fail in my book man, quality takes time ;) 1 Quote Link to comment
Eagle_Adam Posted December 12, 2013 Author Report Share Posted December 12, 2013 looks like all the powder coated parts are done! im hoping to finish up the front end tonight so i can put the goon in the garage for a coupla days of needed work and adjustments Quote Link to comment
heretic Posted December 12, 2013 Report Share Posted December 12, 2013 :) you & your 80's Neon Green.!!!! ....... looking good :) 1 Quote Link to comment
Eagle_Adam Posted December 12, 2013 Author Report Share Posted December 12, 2013 :) you & your 80's Neon Green.!!!! ....... looking good :) bet nobody will ever mistake my ride for someone elses ;) 1 Quote Link to comment
Eagle_Adam Posted December 13, 2013 Author Report Share Posted December 13, 2013 frame notches...... sure why not! 1 Quote Link to comment
Farmer Joe Posted December 13, 2013 Report Share Posted December 13, 2013 you get a shop to do those steering arms any cheaper? Quote Link to comment
Eagle_Adam Posted December 13, 2013 Author Report Share Posted December 13, 2013 you get a shop to do those steering arms any cheaper? havnt taken them in yet, family ish got in the way this week Quote Link to comment
Eagle_Adam Posted December 13, 2013 Author Report Share Posted December 13, 2013 sitting at work not being able to open this box is killing me...... Quote Link to comment
jrock4224 Posted December 13, 2013 Report Share Posted December 13, 2013 hope your hungry ? Quote Link to comment
jrock4224 Posted December 13, 2013 Report Share Posted December 13, 2013 spoiler alert 1 Quote Link to comment
Eagle_Adam Posted December 13, 2013 Author Report Share Posted December 13, 2013 Quote Link to comment
Eagle_Adam Posted December 13, 2013 Author Report Share Posted December 13, 2013 Quote Link to comment
Eagle_Adam Posted December 13, 2013 Author Report Share Posted December 13, 2013 om nom nom - the chip was kinda stale tho....... Quote Link to comment
Farmer Joe Posted December 14, 2013 Report Share Posted December 14, 2013 lol wut? Quote Link to comment
jrock4224 Posted December 14, 2013 Report Share Posted December 14, 2013 tims cascade there stale to begin with...... i skipped the soup figured that wouldnt be bueno Quote Link to comment
Eagle_Adam Posted December 14, 2013 Author Report Share Posted December 14, 2013 well thanx for lunch..... but this is what i really wanted, and boy is it yummy! lower timing cover to match the block crank pulley oil pan to complete the black bottom end silver upper timing cover to match the cyl head water pump pulley valve cover motor mounts and last but not least, a set of grill trim rings!! 4 Quote Link to comment
Janksun Posted December 14, 2013 Report Share Posted December 14, 2013 Gonna have a black grill? Quote Link to comment
Eric Garside Posted December 14, 2013 Report Share Posted December 14, 2013 As jrock would say, fap fap fap!!! 2 Quote Link to comment
Eagle_Adam Posted December 14, 2013 Author Report Share Posted December 14, 2013 Gonna have a black grill? Yup, gunna sand it down and paint it black :) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.