]2eDeYe Posted October 26, 2013 Report Share Posted October 26, 2013 Great idea, you should incorporate a metal hinge :D Quote Link to comment
Eagle_Adam Posted October 27, 2013 Author Report Share Posted October 27, 2013 Not a bad idea! But in not the designer :/ Ill pass that tidbit along. Quote Link to comment
Tristin Posted October 27, 2013 Report Share Posted October 27, 2013 There's a guy in Cali that's producing these already. Not sure if he got around to the 620 yet though... Said he was making 521 and 510 ones. Had plans for the 620. Either say should be a big step above the cardboard. Quote Link to comment
Eagle_Adam Posted October 28, 2013 Author Report Share Posted October 28, 2013 It's the same guy, Rods mods. After I saw what he's already done I was sold. 1 Quote Link to comment
Eagle_Adam Posted October 28, 2013 Author Report Share Posted October 28, 2013 My main goal was to have a unique place to show off the ECU and new control box that's coming, and to do that I needed a metal mount. I've never seen anyone else do it so I figured game on!It should be pretty clean when done!Jessi also picked me up a hot wheelAnd I managed to get the KA broken down too Now I have to decide if the bottom end needs refreshed or not 2 Quote Link to comment
heretic Posted October 28, 2013 Report Share Posted October 28, 2013 :) I was thinking about this very thing while working on my red truck. It should be quite easy :thumbup: Introducing a new metal glovebox insert for all 620's!!! Quote Link to comment
Busta Nut Posted October 28, 2013 Report Share Posted October 28, 2013 Holy crap, dude.... I haven't been on here for a month and you're haulin' ass..... :thumbup: F'n Killer!! Hope pops is all good and recovers quick....... ........but not too quick ;) 1 Quote Link to comment
Eagle_Adam Posted October 29, 2013 Author Report Share Posted October 29, 2013 tools: http://www.summitracing.com/parts/pro-66785?seid=srese1&gclid=CNicw7_evLoCFaY9Qgod5wYAOw feeler gauges ring expander engine assembly lube Quote Link to comment
Eagle_Adam Posted October 29, 2013 Author Report Share Posted October 29, 2013 found a series of vids i liked that showed the bottom end assembly, figured i share :D Quote Link to comment
Draker Posted October 29, 2013 Report Share Posted October 29, 2013 Good stuff. It's the little things like that people skip over and the end result is a failed rebuild. 2 Quote Link to comment
Eagle_Adam Posted October 29, 2013 Author Report Share Posted October 29, 2013 yup, ive watched a dozen or two vids so far but his series was the most concise and descriptive :) 1 Quote Link to comment
jrock4224 Posted October 29, 2013 Report Share Posted October 29, 2013 carefull your build thread will be a sticky soon...... I know when I use that ka I have im coming to look at tall these reference vids....thanks for posting them ...good lunch entertainment 2 Quote Link to comment
Eagle_Adam Posted October 29, 2013 Author Report Share Posted October 29, 2013 np - i figured anybody with a 620 should be able to install a KA and an L after reading thru this....... Quote Link to comment
jrock4224 Posted October 29, 2013 Report Share Posted October 29, 2013 probably not your vague and segmented.... lol plus they might lose interest when u went through three trucks to get here...lolololol... I keeeeeddd 1 Quote Link to comment
Eagle_Adam Posted October 29, 2013 Author Report Share Posted October 29, 2013 meh their loss, silly newbs Quote Link to comment
jrock4224 Posted October 29, 2013 Report Share Posted October 29, 2013 Yea silly noobs ....... And if u got this far noobs keep reading ....... It gets epic in about 5 pages 2 Quote Link to comment
Eagle_Adam Posted October 29, 2013 Author Report Share Posted October 29, 2013 jrock the psychic! Quote Link to comment
Kirden Posted October 29, 2013 Report Share Posted October 29, 2013 As always, waiting patiently to see this one through. This build thread is so much more entertaining than minty... :fu: J/K, your build and tristin's social networking thread are both very entertaining and informative. You're still planning to paint the truck right? I mean it looks good to me, but black over that green will be stunning :) 1 Quote Link to comment
Eagle_Adam Posted October 29, 2013 Author Report Share Posted October 29, 2013 Yep, the truck will get paint. Just not sure when Quote Link to comment
Eagle_Adam Posted November 1, 2013 Author Report Share Posted November 1, 2013 well.................................... i couldnt leave it alone so now im in it balls deep 2 Quote Link to comment
jrock4224 Posted November 1, 2013 Report Share Posted November 1, 2013 balls deep????? .....are u talking the motor or the exceptionally attractive female in pic post 1...either way im excited for u ..... no homo.... waitwut, your gonna want that cover sooner then later...fawk......well if u buy me a engine stand I will throw my dohc ka on it and start pulling parts off it to coat for u .,.. 1 Quote Link to comment
jrock4224 Posted November 1, 2013 Report Share Posted November 1, 2013 fwiw that pic number one is PYT cuz FTW Quote Link to comment
]2eDeYe Posted November 1, 2013 Report Share Posted November 1, 2013 Full rebuild FTW! :D Quote Link to comment
Eagle_Adam Posted November 1, 2013 Author Report Share Posted November 1, 2013 balls deep????? .....are u talking the motor or the exceptionally attractive female in pic post 1...either way im excited for u ..... no homo.... both :angel: Quote Link to comment
Eagle_Adam Posted November 1, 2013 Author Report Share Posted November 1, 2013 waitwut, your gonna want that cover sooner then later...fawk......well if u buy me a engine stand I will throw my dohc ka on it and start pulling parts off it to coat for u .,.. done deal - PM me your paypal Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.