Eagle_Adam Posted May 8, 2013 Author Report Share Posted May 8, 2013 I'm really happy with the truck overall!! Slodat, my only tip would be to make the trans tunnel cover removable. Getting the trans in was a PITA with the cover on. Or maybe I'm missing something..... Quote Link to comment
heretic Posted May 8, 2013 Report Share Posted May 8, 2013 awesome work. I love the covered arm rests also. The guy that did that interior work (me) is happy to do more Datsuns! Quote Link to comment
Eagle_Adam Posted May 8, 2013 Author Report Share Posted May 8, 2013 Got the new motor mounts in yesterday too! Left to do before canby: new heater core and hoses mount the rad wire the engine bay install the new coil put in the black seat belts i have mount the titans install the radio/speakers i have put in the new grill and bumper pick up the new camper shell i picked up from Siqx20 and get it on ( gotta have a safe place to escape thew tasers from what ive been told) finish the interior install and what ever else i find out i need to do along the way mount the new front bumper Quote Link to comment
Eagle_Adam Posted May 8, 2013 Author Report Share Posted May 8, 2013 also gotta install the DZ start Quote Link to comment
heretic Posted May 8, 2013 Report Share Posted May 8, 2013 I WANT.!!!!! also gotta install the DZ start Quote Link to comment
Eagle_Adam Posted May 8, 2013 Author Report Share Posted May 8, 2013 :thumbup: 1 Quote Link to comment
sedition88 Posted May 8, 2013 Report Share Posted May 8, 2013 I want to do this to my 510 someday Quote Link to comment
DISLEXICDIME Posted May 8, 2013 Report Share Posted May 8, 2013 620 trans a did it have sealant around the center section where the bell housing attaches. If so that is the one out of bee bani old long bed Quote Link to comment
Eagle_Adam Posted May 9, 2013 Author Report Share Posted May 9, 2013 Amber high beams are in This is the core support damage behind the bumper from a previous accident Quote Link to comment
Eagle_Adam Posted May 9, 2013 Author Report Share Posted May 9, 2013 But I did get a new bumper with the truck, so I set out to mounting it Found some shnazzy bolts to delete the rubber over riders Need some more hardware so I can mount the bumper to the mounts. Quote Link to comment
Eagle_Adam Posted May 9, 2013 Author Report Share Posted May 9, 2013 Got the new heater core, hoses, firewall grommets, and hearted core valve installed too Then got the drivers seat mounted, the center console and pass seat are just chilln till I get more hardware Quote Link to comment
Siqx20 Posted May 9, 2013 Report Share Posted May 9, 2013 Getting closer! Woop woop! Quote Link to comment
heretic Posted May 9, 2013 Report Share Posted May 9, 2013 DAMN look'n good.!!! Quote Link to comment
Eagle_Adam Posted May 9, 2013 Author Report Share Posted May 9, 2013 Left to do before canby: new heater core and hoses mount the rad wire the engine bay install the new coil put in the black seat belts i have mount the titans install the radio/speakers i have put in the new grill and bumper pick up the new camper shell i picked up from Siqx20 and get it on ( gotta have a safe place to escape thew tasers from what ive been told) finish the interior install install manifold studs install new motor mounts and what ever else i find out i need to do along the way Quote Link to comment
red76datsun Posted May 9, 2013 Report Share Posted May 9, 2013 Looking good man. Hope to see this at canby! Quote Link to comment
sedition88 Posted May 9, 2013 Report Share Posted May 9, 2013 It's coming along :thumbup: Quote Link to comment
Eagle_Adam Posted May 10, 2013 Author Report Share Posted May 10, 2013 Left my damned garage door opener at work... And it's locked up till morning Quote Link to comment
Eagle_Adam Posted May 10, 2013 Author Report Share Posted May 10, 2013 So no progress tonight :/ Quote Link to comment
bananahamuck Posted May 10, 2013 Report Share Posted May 10, 2013 Left my damned garage door opener at work... And it's locked up till morning Seriously ?? you crashed your garage door opener too.?? :w00t: :rofl: Oh,,,,,,,, damned ,,,,,,,,,,,,,,,NOT damaged :angel: 1 Quote Link to comment
Eagle_Adam Posted May 13, 2013 Author Report Share Posted May 13, 2013 Got a set of cheap studs at a hardware storeNow I can mount the intake and exhaust maniGettn closer, either the "new" bumper is way off or the trucks outta shape... I'm going with a bad repop. But I have one from another truck so I'm gunna dig it outta storage and try it Quote Link to comment
jrock4224 Posted May 13, 2013 Report Share Posted May 13, 2013 damn dude your k=just knocking out the datto projects down there Quote Link to comment
Eagle_Adam Posted May 13, 2013 Author Report Share Posted May 13, 2013 Gotta get em all done by canby!! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.