Busta Nut Posted January 14, 2015 Author Report Share Posted January 14, 2015 Nice ride brugh. Thx Papi!! Hope you find what you're looking for...... Quote Link to comment
Busta Nut Posted January 14, 2015 Author Report Share Posted January 14, 2015 Idk what spring rate I have but its stiff. And very bouncy. Something close to 400 Bouncy becuz you have no travel..... Quote Link to comment
mttam510 Posted January 15, 2015 Report Share Posted January 15, 2015 Bouncy becuz you have no travel..... 400 lb/in is waaayyyy to stiff for a street car. Bouncy is underdamped or over sprung. you has bumpstops? Quote Link to comment
Busta Nut Posted January 15, 2015 Author Report Share Posted January 15, 2015 400 lb/in is waaayyyy to stiff for a street car. Bouncy is underdamped or over sprung. you has bumpstops? :ph34r: ...you comin' on the 7th?? Quote Link to comment
Janksun Posted January 15, 2015 Report Share Posted January 15, 2015 :ph34r: ...you comin' on the 7th?? I'm gonna do my best! Quote Link to comment
Janksun Posted January 15, 2015 Report Share Posted January 15, 2015 Bouncy becuz you have no travel..... I have quite a bit of travel. Actually. 400 lb/in is waaayyyy to stiff for a street car. Bouncy is underdamped or over sprung. you has bumpstops? I took my bump stops out Quote Link to comment
mttam510 Posted January 15, 2015 Report Share Posted January 15, 2015 Did your KONI inserts include stops? If so, I would cut an inch from it. IiRC the stops should be 55mm OAL. I would trim 25 mm from the non-tapered end. You can always add packers to tune bumpstomp engagement. If not, I would get some, I will see if I have any kicking around.. Quote Link to comment
Busta Nut Posted January 20, 2015 Author Report Share Posted January 20, 2015 Did your KONI inserts include stops? If so, I would cut an inch from it. IiRC the stops should be 55mm OAL. I would trim 25 mm from the non-tapered end. You can always add packers to tune bumpstomp engagement. If not, I would get some, I will see if I have any kicking around.. No...they didn't come with them.....I installed some though.... .....but I am dropped.... When I'm sitting on the bumpstops there is about an inch to the ground..... .......this only happens on really bad dips when I have extra weight in the car...... Otherwise I'm good 99% of the time..... Quote Link to comment
Busta Nut Posted January 20, 2015 Author Report Share Posted January 20, 2015 Moar roadtrip woes....some already know.....others don't....... 536mi road trip.................made to mile 528........ Then this....... oics of the unbelievable job Mattndew76 did when I find my damn card reader..... 1 Quote Link to comment
mrbigtanker Posted January 20, 2015 Report Share Posted January 20, 2015 I will tell you what at least you did not have to get up on a tow truck. 2 Quote Link to comment
Busta Nut Posted January 21, 2015 Author Report Share Posted January 21, 2015 Putting this here also for my reference...... Spent Sunday morning looking for someone to weld up my :poop: ....... Mattndew76 to the rescue........... Matt has a great ass...... :rofl: Dooooooooooood....... 3 Quote Link to comment
mrbigtanker Posted January 22, 2015 Report Share Posted January 22, 2015 Or those bugle boy jeans he's wearing.lol 2 Quote Link to comment
denmarkboy Posted January 23, 2015 Report Share Posted January 23, 2015 Or those bugle boy jeans he's wearing.lol i know pants are a stranger to you sunny cali boys , round here we wear carhart's or nothing ! :w00t: 2 Quote Link to comment
Mattndew76 Posted January 23, 2015 Report Share Posted January 23, 2015 Ha ha ha bugle boys. Much funny. 2 Quote Link to comment
shacks510 Posted January 23, 2015 Report Share Posted January 23, 2015 He's got the jeans. What about the jean shirt and jean jacket? I don't own any pants except my work pants. 45 degrees? I'll throw on a sweater. Quote Link to comment
denmarkboy Posted January 23, 2015 Report Share Posted January 23, 2015 He's got the jeans. What about the jean shirt and jean jacket? I don't own any pants except my work pants. 45 degrees? I'll throw on a sweater. I didnt either when i lived in cali. i used to haul around a pair under the seat of my work truck so if i ever had to go on a osha site it had em on . Quote Link to comment
shacks510 Posted January 23, 2015 Report Share Posted January 23, 2015 I didnt either when i lived in cali. i used to haul around a pair under the seat of my work truck so if i ever had to go on a osha site it had em on . Don't forget the OSHA approved safety sandals. I always find myself wearing not shoes while working on the car. 1 Quote Link to comment
denmarkboy Posted January 23, 2015 Report Share Posted January 23, 2015 I will box up your light and jack stand and put them on the pallet with the engine today . 1 Quote Link to comment
Busta Nut Posted January 23, 2015 Author Report Share Posted January 23, 2015 Thx Al!! Quote Link to comment
Busta Nut Posted January 30, 2015 Author Report Share Posted January 30, 2015 Been a minute since I did something to my baby besides drive the shit out of her..... I've had these for a while now compliments of Skyblue.... They do not fit in the factory hole I have becuz they're for a 240z..... .......my 72510 has 5mm holes....noticed Skyblues 71 has no holes........ 1 Quote Link to comment
Busta Nut Posted January 30, 2015 Author Report Share Posted January 30, 2015 I've been using pieces of heater hose on the ends of my hood to keep it even and stop it from shaking around on the freeway....... I placed them here..... ...and here.... Quote Link to comment
Busta Nut Posted January 30, 2015 Author Report Share Posted January 30, 2015 The right side had a welded nut becuz of the fuel filter mount I wasn't using...... piece o' cake.......just cleaned it up..... 1 Quote Link to comment
Busta Nut Posted January 30, 2015 Author Report Share Posted January 30, 2015 Other side had to be drilled out....I'll weld the nut in when I do the full rotisserie..... 1 Quote Link to comment
Busta Nut Posted January 30, 2015 Author Report Share Posted January 30, 2015 2 Quote Link to comment
Busta Nut Posted January 30, 2015 Author Report Share Posted January 30, 2015 4 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.