510PantiesWET Posted October 3, 2011 Report Share Posted October 3, 2011 I have a 92 full ka24de swap that I would like to put into a 510 coupe. I will pay you and buy some brews to come over and help me mount the motor in the car I'm in lynnwood and should have all the necessary tools, time, space, skills, and effort to put the motor in the car, all I'm looking for is someone who has the knowledge. Quote Link to comment
HRH Posted October 3, 2011 Report Share Posted October 3, 2011 Why don't you put on your big girl panties and git r dun!? :P Quote Link to comment
510kevin Posted October 3, 2011 Report Share Posted October 3, 2011 If u were closer, I'd come help, I just finished my swap a couple weeks ago. It's not hard if u have a hoist, some jackstands and some beer. Probably took me an hour to drop mine in. Get on it Quote Link to comment
H5WAGON Posted October 3, 2011 Report Share Posted October 3, 2011 Pictures....nice and wet ones....:sweat: Don't be shy! Quote Link to comment
Boaty Posted October 4, 2011 Report Share Posted October 4, 2011 :blink: Big girl panties. ... ... ... ... ... ... ...... I didn't know you guys know my ex! Quote Link to comment
FiveTenzo Posted October 11, 2011 Report Share Posted October 11, 2011 kinda far tho :ninja: http://sacramento.craigslist.org/pts/2608366118.html Quote Link to comment
banzai510(hainz) Posted October 11, 2011 Report Share Posted October 11, 2011 drop the car off at Franks House and he can get it done for you with Jeffs help In Everett. Ray Stonehocker (autohero)can also get it done Quote Link to comment
Trophy24 Posted October 13, 2011 Report Share Posted October 13, 2011 How close are you to dropping it in? like, is the crossmember/transmission mount ready for action? If you are looking for a 2nd pair of hands for the drop in, I'm close by and know how to fix cars. Quote Link to comment
510PantiesWET Posted October 14, 2011 Author Report Share Posted October 14, 2011 Not close to mounting it, I can physically get it in on my own. I am looking for help with the transmission tunnel, motor and tranny mounts. We tried putting it in and it was no where near fitting in the tranny tunnel who is frank and jeff in everett? Quote Link to comment
izzo Posted October 14, 2011 Report Share Posted October 14, 2011 he is on here, and the founder of ratsun. PM icehouse Quote Link to comment
Trophy24 Posted October 15, 2011 Report Share Posted October 15, 2011 If you check out the darsport site I think you will find a pattern for the trans tunnel cut. Motor mounts will need to be done. Time to flip the crossmember. Quote Link to comment
Trophy24 Posted October 15, 2011 Report Share Posted October 15, 2011 If you check out the darsport site I think you will find a pattern for the trans tunnel cut. Motor mounts will need to be done. Time to flip the crossmember. Quote Link to comment
510PantiesWET Posted October 15, 2011 Author Report Share Posted October 15, 2011 Darsport huh? I'll check it out. Thanks everyone for the info, keep it comin Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.