Jump to content

77 longbox build thread


Recommended Posts

Well, after much coercing from others, and a huge amount of oics (which you guys can thank my droid for...never took any oics of previous builds) I am finally starting this out. This truck was a true survivor, and I am going to do a resotration of sorts. Color will be original, with alot of the flair of the original truck throughout. Upgrading the driveability has been first and foremost, and am planning a ka swap soon. I am going to start compiling oics from when i first bought it up through now. I will make a few posts as to not contaminate the first post with too much info.

 

This is in July of 2010. Just sold my 07 ram laramie builder and paid off my bills. Found this clean 1977 longbox over in Missoula, Montana. Guy had it on there for a while, i got it for 800 and a roadtrip. Beauty part was i won 900 at the casino the night before, so this truck already started out free to me, with a lot of luck. At this point I have had the truck a month, and you can see I already put 18" titans on..

DSC00011.jpg

Lowered 3" blocks and torsions........cut bumps

DSC00012.jpg

Put in HID hi and low beams, in crystal housings

DSC00009.jpg

superfunk plaid seats and panels!

DSC00002.jpg

the drivers and pass fenders are the only rust through on the truck

DSC00015.jpg

This is the worst ouch on the truck.....

DSC00014.jpg

The engine bay is very clean!

DSC00006.jpg

Some of you are familiar with my offensively bright HID'S (as pumpkin says anyhow!)

DSC00010.jpg

  • Like 1
Link to comment
  • Replies 258
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

So moving into 2011......January fourth my wife and I split up. I wasn't able to do much to the truck until I ws sure I was getting it to myself. Finally in march everything got settled and it was back to being wildman, and the lack of all that bs in my life has led us to here.......

 

This is right after I completed my 4 wheel disc swap. I used the beebani system.......I see photobucket jettisoned some of my photos, this is the ONLY one I have of right after it was done....not sure if you can see them in there, but hey its an oic!

2011-06-06_13-57-37_845.jpg

Right before Canby, i installed my JDM as fuck taillights with amber turns.........

And packed for canby!

2011-06-08_21-34-42_772.jpg

Just throwin some before oics out here.......this is meeting up with Jayden, chester, wide14u at a and w

2011-06-10_13-47-29_658.jpg

Link to comment

Ok, so after Canby my first plan of attack was making sure that my rust free truck stays that way. the next few oics are of stripping the interior floor down, prepping the surface, and applying bedliner to the floor!
2011-06-17_16-35-28_844.jpg

 

2011-06-17_16-35-15_48.jpg

 

2011-06-17_15-30-40_805.jpg

 

2011-06-17_16-35-51_719.jpg

2011-06-17_16-35-07_23.jpg

 

2011-06-17_17-31-40_588.jpg

 

2011-06-17_21-21-22_702.jpg

 

 

The raptor is tough, nearly impervious and it quieted down the interior TONS

  • Like 1
Link to comment

<p>Now this time a week later, I had pulled off the front end. The interior was now at the upholstery shop being redone. I had a pair of rustfree fenders that needed some work. As I was working on these fenders, I decided to clean, prep and bedline the inner fender wells too! I also did the backs of the new fenders, however photobucket lost those oics too<br />

2011-06-21_18-54-45_826.jpg</p>

<p>2011-06-21_18-54-37_656.jpg</p>

<p> </p>

<p><br />

So the fenders I mounted back on the truck to test fit, and do the sanding and light filler work<br />

2011-06-28_15-15-40_91.jpg</p>

Link to comment

Keeping on.....these are some oics of the fenders all primed before wetsand!

2011-07-03_20-04-43_354.jpg

2011-07-03_20-04-36_988.jpg

2011-07-03_20-04-51_616.jpg

And during shooting, second or third coat of basecoat.....There was no exact color match for this color is basecoat. I however tracked down a color used on 97-01 nissan micra's that is the modern equivalent........its VERY close and sexy!

2011-07-04_18-24-58_308.jpg

And now here is the fenders and valance on the truck last week!

2011-07-06_20-46-08_332.jpg

  • Like 1
Link to comment

And while the truck was torn apart, waiting for me to find colors and screwing around, I decided to put on my offenhauser dual plane intake and upgrade to an electric fan. I used a fan off of an 01 dodge dakota, worked amazing, very tight fit!

2011-06-28_15-15-15_406.jpg

shoehorn!

2011-06-28_15-15-22_977.jpg

Time for celebration bitches!

2011-05-20_20-59-23_412.jpg

and yea the oics are all taken at my shop....i am head mechanic for the school dist transportation dept here!

school-bus-driver-babes-demotivational-poster.jpg

  • Like 1
Link to comment

So today brought about one of the more awesome things. I was really wanting to keep the plaid interiorm but it was starting to wear down from age, and finding plaid upholstery for auto use is almost impossible. SO at canby I bought a nice seat cover from 79d50? (i think its his screenname), I took this, my door panels, the seat, kick panels and the shifter boot over to my neighbor, who is a very talented upholsterer and had her make all this come together for me! SO great!

2011-07-12_15-39-16_148.jpg

2011-07-12_15-37-59_903.jpg

2011-07-12_15-37-55_444.jpg

2011-07-12_15-38-06_869.jpg

 

And now going in!!!

2011-07-12_16-44-14_88.jpg

2011-07-12_16-44-36_492.jpg

2011-07-12_16-44-21_664.jpg

2011-07-12_16-44-45_759.jpg

 

A little out of sequence......the carpeting was shot in the truck. I REALLY didnt want to spend 150 bucks on carpeting for like a 720 or a hardbody and fuck with fitting it all in.......I was out at pull n save a couple weeks ago and ran across a ford courier that someone had started to restore then lost interest......it was filthy, but ill be damnded if there wasnt a nice, black aftermarket chunk of molded carpet in it. I bought it for 7$ and cleaned the fuck out of it, and here are the oics of it installed

2011-07-12_15-36-10_495.jpg

2011-07-12_15-36-29_373.jpg

 

So far thats all she wrote. I will be working on this truck hardcore, as I have a ka swap coming up and will keep this thread updated. I do ALL of my own work, paint, body , mechanical everything. Built not bought............i live for this. Have fun and comment away guys!

  • Like 1
Link to comment

Very nice it looks like you will have your ka swap before me

well chet, sometimes it works that way..........i am really being a madman on this build........I have above average abilities and great shop to work in. Not every ratsuner has this. I am lucky....plus i scour the shit out of CL to find parts and rigs lol..............hopefully make a road trip soon with the KA!

Link to comment
2eDeYe' date='13 July 2011 - 07:45 AM' timestamp='1310568324' post='511648']

Yay, build thread! :lol:

 

 

The new paint looks great. Too bad about the plaid, but the black looks boss.

Thanks! I really wanted to keep the plaid, but yea the black is looking amazing! Lots more to do......good thing someone had me do this lol!

Link to comment

well chet, sometimes i swing that way..........i am really being a catcher in this relationship........I have above average abilities and a smooth ass... Not every ratsuner has this. I am lucky....plus i scour the shit out of CL to find trannys lol..............hopefully make a road trip soon with my new buddy!!

 

FIXED :D

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.