hessianben Posted June 25, 2010 Report Share Posted June 25, 2010 Just thought I would post a couple pics of my Frontier. I've been working on it more than anything in the past few weeks. I bought these wheels from Radim on here, (George) and his brother Edward's friend. They are OZ 18x8.5"s They were chrome, but pretty corroded. I spend some days sanding, smoothing, priming and painting them. They ended up looking alright! I also had a new exhaust built to go up and over most of the cross members, so i wouldn't drag on speedbumps anymore! Went from the manifold, up over the trans xmember, to the cat, just below the carrier bearing xmember, to a Spintech 2.5" to 2.5"(x2) muffler, and up over the axle with twin tailpipes. sounds really growly, not rice at all. turns some heads for sure now. video/sound clip also did a cam swap from a couple different ka versions... stock frontier cams are 224 or something like that. I switched to 2 S13 exhaust cams (248/248) which gave amazing top end, but lost a little bottom end grunt... I finally switched to a 248/232 setup from S13/S14 donors, which gave back some bottom end torque, but kept the top end pull! win. had to modify the rear cam journal surface by plugging the rear oil hole, or else it would piss all the pressure out. (the truck and later 240 KA heads, don't have a rear cam journal anymore. Thanks for looking! :) Quote Link to comment
motavated Posted June 25, 2010 Report Share Posted June 25, 2010 I seriously have to do my exhaust like that. That is what lead to my head bolt tightening scenario... Nice!!!! Who did your exhaust? Quote Link to comment
hessianben Posted June 25, 2010 Author Report Share Posted June 25, 2010 the guys who did my exhaust were Bud and Russ at Mesa Muffler, on Harbor Blvd, in Costa Mesa. They did the exhaust for the 521 too. Good guys. Quote Link to comment
]2eDeYe Posted June 25, 2010 Report Share Posted June 25, 2010 Nice Frontier. :thumbup: Quote Link to comment
datto510 Posted June 25, 2010 Report Share Posted June 25, 2010 Those wheels look great on your truck! Quote Link to comment
hessianben Posted June 25, 2010 Author Report Share Posted June 25, 2010 THanks- i wasn't sure i liked how the color turned out, but it's growing on me now... :) Quote Link to comment
banzai510(hainz) Posted June 25, 2010 Report Share Posted June 25, 2010 How you learn to do a KA timming cam swap. I reaaly need to know how to do this. Since KA use buckets unstead of rocker arms I guess you dont need to lash them up(lash pads ect).???????? Quote Link to comment
Pacific coast Datsun Posted June 25, 2010 Report Share Posted June 25, 2010 Ben thats a really nice agressive look. Does this mean the Nismo rims are now for sale :cool: ? & i like the exhaust...tucked up high & out of the way. Quote Link to comment
sick620 Posted June 25, 2010 Report Share Posted June 25, 2010 i like the stance clean little truck Quote Link to comment
CharlieBucket Posted June 25, 2010 Report Share Posted June 25, 2010 i love the truck, i wish i need all this to mine recently. What color are the wheels exactly? They are not quite black or gold, i like it alot! Did you just remove you rear bumper? or roll pan? Quote Link to comment
Radim Posted June 25, 2010 Report Share Posted June 25, 2010 They are Charcoal, when i first saw them at work i thought they were flat black chrome. Quote Link to comment
hessianben Posted June 25, 2010 Author Report Share Posted June 25, 2010 How you learn to do a KA timming cam swap. I reaaly need to know how to do this. Since KA use buckets unstead of rocker arms I guess you dont need to lash them up(lash pads ect).???????? I've been reading on it for a while- the 240 guys have been experimenting for a while- the trucks are basically the same, but without the rear cam journal. if youre using an exhaust cam on the intake side, you have to rotate it back 4 teeth retarded. (adjustable cam gears would be nice, but out of the budget) here is one thread i was following: http://forums.nicoclub.com/my-comments-on-248-240-s13-cam-swap-t152578.html and here is the jim wolf instructions: (i hope this link works. you can download the pdf pretty easy) http://docs.google.com/viewer?a=v&q=cache:KILXyZVg5QAJ:www.jimwolftechnology.com/wolfpdf/CAM%2520INSTALL%2520INST%2520FOR%2520KA24DE.PDF+ka24de+cam+swap+jim+wolf&hl=en&gl=us&pid=bl&srcid=ADGEESjeqrPSboNAvwXYRTdGl5EpjIWlpPAzV5-ks3ou_CWTnjHQPQzUaI8Ld1Q6MGXShdcNIVR0sgCUeUqti-bv18CeyOd6u7IEKuVXsxcA3x990_6UgG4ovCaUZ1XVkkT8Y1m7wlGB&sig=AHIEtbR6S-jLfpF0b_fn9ej2zImvZLz8ww Ben thats a really nice agressive look. Does this mean the Nismo rims are now for sale :cool: ? & i like the exhaust...tucked up high & out of the way. THanks mark. but, no- Nismo's arent for sale :) the go on the 521! :) i love the truck, i wish i need all this to mine recently. What color are the wheels exactly? They are not quite black or gold, i like it alot! Did you just remove you rear bumper? or roll pan? Thanks CB, that rear valance is the same one from the hardbody's. it was too much $ for a rollpan, so i spent $30 on that valance, and rattle canned it. cut a little recess for the tailpipes too. Quote Link to comment
Bleach Posted June 25, 2010 Report Share Posted June 25, 2010 I need to lower my Frontier... nice truck you have there Quote Link to comment
dat620 Posted June 26, 2010 Report Share Posted June 26, 2010 very nice lookin fronty, like the new wheels also, and as pac asked, are you by chance wanting to sell the old take off wheels, very nice job you did there, i used to have a 2000 crew cab fronty, lowered it 3 and 4" and did a cat back exhaust turned out lookin good...tom Quote Link to comment
hessianben Posted June 26, 2010 Author Report Share Posted June 26, 2010 very nice lookin fronty, like the new wheels also, and as pac asked, are you by chance wanting to sell the old take off wheels, very nice job you did there, i used to have a 2000 crew cab fronty, lowered it 3 and 4" and did a cat back exhaust turned out lookin good...tom Thanks, but sorry, not selling my Nismo's... they will be on the 521 as soon as it's back together :) Quote Link to comment
72nismo Posted June 27, 2010 Report Share Posted June 27, 2010 I use to have a 2000 Frontier always wanted to put some wheels on it.But I ended up selling my Frontier actually which I still had it. But anyways Hessianben your Frontier looks good with those wheels. Thumbs up!!!! LBG Quote Link to comment
kiznook Posted June 27, 2010 Report Share Posted June 27, 2010 +1 for the Spintech! I have one on my 510 that I previously had on my hardbody, and gotta say they sound great on KAs and Ls Wheels look hot too Quote Link to comment
hessianben Posted June 28, 2010 Author Report Share Posted June 28, 2010 +1 for the Spintech! I have one on my 510 that I previously had on my hardbody, and gotta say they sound great on KAs and Ls Wheels look hot too yeah, honestly, i've never found a muffler that gave a good tone to these motors... maybe a turbo muffler with a long cherry bomb... ... but this sound, i'm stoked on! thanks! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.