BEEBANI Posted November 28, 2007 Report Share Posted November 28, 2007 Here ya go guys, messing around with some ideas for plaques. Made this one out of 10ga. 304 stainless, it's about 10 inches tall by 6 inches wide. Quote Link to comment
Pacific coast Datsun Posted November 28, 2007 Report Share Posted November 28, 2007 Jason 1 word...badass!! If you decide to make more ill buy one :cool: Quote Link to comment
spiffinspudater Posted November 28, 2007 Report Share Posted November 28, 2007 Here ya go guys, messing around with some ideas for plaques. Made this one out of 10ga. 304 stainless, it's about 10 inches tall by 6 inches wide. That is AWESOME! Quote Link to comment
Bleach Posted November 28, 2007 Report Share Posted November 28, 2007 that's cool. You do good metalwork Quote Link to comment
]2eDeYe Posted November 28, 2007 Report Share Posted November 28, 2007 I'd like to purchase one as well :D Quote Link to comment
pope_face Posted November 28, 2007 Report Share Posted November 28, 2007 Wow... that is really good... I'll stay out of the buying part for now, but it would be pretty cool to have in the rear window... Quote Link to comment
71-521 Posted November 28, 2007 Report Share Posted November 28, 2007 smaller probably wouldn't look as good, huh?(fender decals) Quote Link to comment
Steroid Posted November 28, 2007 Report Share Posted November 28, 2007 That is VERY cool!!!!! Congrats!!!! Quote Link to comment
]2eDeYe Posted November 28, 2007 Report Share Posted November 28, 2007 smaller probably wouldn't look as good, huh?(fender decals) That'd be a sweet badge to run under the DATSUN badge on the fender, sorta like the deluxe badge :cool: Quote Link to comment
BEEBANI Posted November 28, 2007 Author Report Share Posted November 28, 2007 Smaller would have to be laser cut or waterjet, my machine would butcher anything smaller. What would ya'll pay for these? I plan on polishing them better at home with a buffer. Quote Link to comment
pope_face Posted November 28, 2007 Report Share Posted November 28, 2007 If you do end up getting a few of them made up, you could offer them unpolished... that way they can either be polished or painted, and it reduces time for you and cost for us... :D Quote Link to comment
71-521 Posted November 28, 2007 Report Share Posted November 28, 2007 2eDeYe;29728'']That'd be a sweet badge to run under the DATSUN badge on the fender, sorta like the deluxe badge :cool: That's exactly what I was thinking....:D Quote Link to comment
Pacific coast Datsun Posted November 28, 2007 Report Share Posted November 28, 2007 Smaller would have to be laser cut or waterjet, my machine would butcher anything smaller. What would ya'll pay for these? I plan on polishing them better at home with a buffer. Would $20 plus shipping be a low ball offer? It all depends on how much time you have into them. You could leave mine raw,may wanna get creative :D Quote Link to comment
djmoreron Posted November 28, 2007 Report Share Posted November 28, 2007 That's exactly what I was thinking....:D same here. i think i have access to a water jet Quote Link to comment
]2eDeYe Posted November 28, 2007 Report Share Posted November 28, 2007 Pac nailed it...$20 sounds good if'n it's not lowballing ya... Quote Link to comment
pope_face Posted November 28, 2007 Report Share Posted November 28, 2007 Was this cut by hand, or automated machine? If it's by hand... then $20 is probably a little low... I only know this because I know a guy that runs a jewellery shop, but he can make badges and grilles and anything... the thing is, he charges quite a bit per hour, plus materials, and it usually takes a couple hours to know out something like that by hand... Then again, for a pair of badges... say, 1.5" x 2.5"... I would say ~$20/$30 would be reasonable if they were made on an automated machine... Quote Link to comment
Bleach Posted November 28, 2007 Report Share Posted November 28, 2007 $200 sounds like a good price :) Quote Link to comment
]2eDeYe Posted November 28, 2007 Report Share Posted November 28, 2007 BEE has a plasma table....lucky bastard :D I'd sell it to Bleach if I was you BEE :lol: Quote Link to comment
BEEBANI Posted November 28, 2007 Author Report Share Posted November 28, 2007 I'd say $30, and I'll donate 10 of each sale to the site. Quote Link to comment
pope_face Posted November 28, 2007 Report Share Posted November 28, 2007 Beebani: $30 for a single large one, a single badge, or a pair of badges? Quote Link to comment
Fineline Posted November 28, 2007 Report Share Posted November 28, 2007 That things badass! I swear you have more free time at work than I do! I need to get into management. :fu: Put me down for one! Quote Link to comment
DISLEXICDIME Posted November 29, 2007 Report Share Posted November 29, 2007 i will buy a plaque for 30 buck's let me know when you are excepting orders so i can pay pall or send you the cash! Quote Link to comment
RB_Shaggs Posted November 29, 2007 Report Share Posted November 29, 2007 yes please let us know when you start selling them Quote Link to comment
Pacific coast Datsun Posted November 29, 2007 Report Share Posted November 29, 2007 Jason- $30 & $10 going to the site is a fair price. Let us know when you get a few made & your ready to ship, id love to have one for Reso :D Bleach can drive to you & pick his up..:lol: Quote Link to comment
]2eDeYe Posted November 29, 2007 Report Share Posted November 29, 2007 Wow dood, nice.... Thanks :) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.