Acuna989 Posted October 15, 2013 Report Share Posted October 15, 2013 Installed a new dash that I had laying around.Thinking about changing out the steering wheel. Getting tired of the wood grain. 1 Quote Link to comment
67_1600 Posted October 16, 2013 Report Share Posted October 16, 2013 Got my new rims installed, well one half of them anyway. Still need to install the 2" lowering blocks I got from Just Joel and will be lowering the front by about 1.5" or so. 8 Quote Link to comment
edekalil Posted October 16, 2013 Report Share Posted October 16, 2013 Changed oil in the 70 510 I got up and running, now to change the front flexible lines and continue on the brakes till they are finished. Quote Link to comment
edekalil Posted October 17, 2013 Report Share Posted October 17, 2013 Got the 70 510 driving. Next to get the motor into the 72 510 and get it up and driving. Quote Link to comment
edekalil Posted October 17, 2013 Report Share Posted October 17, 2013 Got the 70 510 driving. Next to get the motor into the 72 510 and get it up and driving. Quote Link to comment
edekalil Posted October 17, 2013 Report Share Posted October 17, 2013 Sorry about the double post Quote Link to comment
edekalil Posted October 18, 2013 Report Share Posted October 18, 2013 Got the motor and trans in 72 510. Quote Link to comment
edekalil Posted October 18, 2013 Report Share Posted October 18, 2013 Found most of the parts needed to compleat the 72 sedan and get it up and running. Now I just have to locate the nuts bolts and screws. Quote Link to comment
edekalil Posted October 19, 2013 Report Share Posted October 19, 2013 Found 2 brand new in the bags center links for the front end. Now to get to work and finish getting this one up and going. Quote Link to comment
dr.feltersnatch Posted October 20, 2013 Report Share Posted October 20, 2013 got my new clutch installed, engine bay painted and motor put back in. a few things left to button up but she runs again! i made some templates for a steering box brace. now i just need to pick up some material to build it. 1 Quote Link to comment
edekalil Posted October 20, 2013 Report Share Posted October 20, 2013 got my new clutch installed, engine bay painted and motor put back in. a few things left to button up but she runs again! i made some templates for a steering box brace. now i just need to pick up some material to build it. I was wondering I have a carb set up like the ones on your car. What size motor and carbs are they? I want to get mine working to use on one of my sedans. Quote Link to comment
Son_of_a_Datsun_Guy Posted October 20, 2013 Report Share Posted October 20, 2013 Quote Link to comment
dr.feltersnatch Posted October 20, 2013 Report Share Posted October 20, 2013 I was wondering I have a carb set up like the ones on your car. What size motor and carbs are they? I want to get mine working to use on one of my sedans. 38 mm flat tops. its an l18 with u67 head. here is some info on tuning these carbs hope it helps. http://www.nicoclub.com/archives/2-write-ups-on-tuning-su-carbs.html Quote Link to comment
edekalil Posted October 22, 2013 Report Share Posted October 22, 2013 Thanks, Found the bolts and nuts to finish putting the 72 sedan together. Will get back on it next weekend. Quote Link to comment
jovial_cynic Posted October 25, 2013 Report Share Posted October 25, 2013 Put oil into the SR20DET. Next steps, getting the syncromesh gear oil into the transmission, coolant into the radiator (well, need a rad hose that fits, first), oil/coolant lines to the turbo, fuel lines and fuel pump, and then vroom. Quote Link to comment
Ranman72 Posted October 28, 2013 Report Share Posted October 28, 2013 fixed the drivers side door rubber finally used a product James recommended :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: Quote Link to comment
edekalil Posted October 29, 2013 Report Share Posted October 29, 2013 Took the 70 510 out only to have it shut down due to trash in the gas tank or such. Will have to work on that. Quote Link to comment
Big_E-Dog Posted October 29, 2013 Report Share Posted October 29, 2013 building a shroud for the 300zx hood scoop to dump air into the intercooler Quote Link to comment
macgyver Posted November 2, 2013 Report Share Posted November 2, 2013 Started to pull the motor for the beginnings of my swap. 1 Quote Link to comment
dr.feltersnatch Posted November 2, 2013 Report Share Posted November 2, 2013 changed out my t/c bushings for the experimental engineering kit. i also replaced the bolt i seem to have lost from my alternator. Quote Link to comment
macgyver Posted November 2, 2013 Report Share Posted November 2, 2013 fixed the drivers side door rubber finally used a product James recommended :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup:What product was that? Need to do the same :/ Quote Link to comment
Carwson Posted November 3, 2013 Report Share Posted November 3, 2013 Well I got the coil overs in the 2 door (thank you James ) but need new wheels that don't drag to drive it. Got my tires just waiting on my wheels. 1 Quote Link to comment
edekalil Posted November 4, 2013 Report Share Posted November 4, 2013 Got some parts on the 72/510, gonna get some more on today. Quote Link to comment
edekalil Posted November 5, 2013 Report Share Posted November 5, 2013 Got most of the parts on now just have a few more parts to finish it. Then have to get all the fluids put in and get it cranked up. As well let my torn up body and fingers heal up, no fun when you get older and every time you barly bump yourself you end up taken the skin off. Quote Link to comment
Roz Posted November 6, 2013 Report Share Posted November 6, 2013 Got my coilovers from Ground Control, so I finally put the rear suspension back together. New control arm, crossmember, and moustache bar bushings, along with slotting the crossmember. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.