Madness Posted September 10, 2009 Report Share Posted September 10, 2009 Just wanted to call you and tell you that I'm doing 78mph down the highway (with no background noise) thats all. You're an ass :fu: Quote Link to comment
Bob3 Posted September 10, 2009 Author Report Share Posted September 10, 2009 You're an ass :fu: :lol::D:lol::D:lol::D:lol::lol::lol: :fu: Quote Link to comment
Bob3 Posted January 5, 2010 Author Report Share Posted January 5, 2010 I need some help. I DID DO A SEARCH. I have a no crank - no start problem on my '78 kc. I thought the ignition switch was going bad, as it has been acting up for the past few months. To eliminate the ignition switch I pulled the plug off the back of the ignition switch to see if I could jump start it there. NO. When I jump the ignition is takes 5 to 45 seconds for the lights on the dash to come on and they go off as soon as I try to jump the starter. Then there is a delay before they come on again. Is there a ignition relay? A starter relay? What do you guys think? Thanks - Bob Quote Link to comment
Duke Posted January 5, 2010 Report Share Posted January 5, 2010 Will it crank if you jump it at the starter solenoid? Also try cleaning the connectors, kinda sounds like a bad connection. Quote Link to comment
fastdadd Posted January 5, 2010 Report Share Posted January 5, 2010 the wire for the starter solenoid falls off of mine all the time Quote Link to comment
Skib Posted January 5, 2010 Report Share Posted January 5, 2010 the wire for the starter solenoid falls off of mine all the time lol Iv had that happen on the Z before, finally got around to sticking a new blade plug on it :lol: Quote Link to comment
denveratsun Posted January 7, 2010 Report Share Posted January 7, 2010 Did you check any of the relays yet Bob? Has this been fixed yet? Quote Link to comment
Bob3 Posted January 7, 2010 Author Report Share Posted January 7, 2010 Did you check any of the relays yet Bob? Has this been fixed yet? No, not yet. - I have been driving the MX520 and my M3. I don't know which is more fun! :P I do miss driving the 620. :( Quote Link to comment
Bob3 Posted January 8, 2010 Author Report Share Posted January 8, 2010 I took 5 minutes and looked at the 620. It was easy. The battery terminals were just dirty. I took them off cleaned them up and that was it. Back on the road. ;) Quote Link to comment
slam_dat_sun Posted January 8, 2010 Report Share Posted January 8, 2010 Good going Bob :D Quote Link to comment
denveratsun Posted March 9, 2010 Report Share Posted March 9, 2010 Bringing this thread back from the dead! Got to hang out with Bob the other day and after looking at his awesome new 411 Goon...and the Opposition Goon...and the 320...........and the MX520..........................we did the required "modification" to fit 17' Yukon rims on his 1978 KC...I think it looks pretty cool. We did talk about "lower"... Quote Link to comment
mklotz70 Posted March 9, 2010 Report Share Posted March 9, 2010 that would have been a good reason to buy a lathe!! :) ....or maybe I should say "excuse"! :) Quote Link to comment
Bob3 Posted March 13, 2010 Author Report Share Posted March 13, 2010 that would have been a good reason to buy a lathe!! :) ....or maybe I should say "excuse"! :) I think excuse is better! Next to my 2500 Mega Cab. Quote Link to comment
hessianben Posted March 13, 2010 Report Share Posted March 13, 2010 ooh looks good!! wants lower too :) Quote Link to comment
Bob3 Posted March 20, 2010 Author Report Share Posted March 20, 2010 I fixed up the rear of the 620 today. I cleaned up the inside of my very dirty tail lights and freshened up the paint around my tail lights and license plate. Quote Link to comment
denveratsun Posted March 20, 2010 Report Share Posted March 20, 2010 Thats really nice Bob!....in a sweet sort of motherly voice... :D Now lower it Dang it!...in a strong fatherly voice! :lol: Quote Link to comment
]2eDeYe Posted March 21, 2010 Report Share Posted March 21, 2010 That's a good looking truck. :cool: Quote Link to comment
Dat620guy Posted March 21, 2010 Report Share Posted March 21, 2010 Good job there Bob! Like how the truck looks now. :thumbup: Quote Link to comment
Bob3 Posted March 21, 2010 Author Report Share Posted March 21, 2010 The 620 with the NSX race car. Is that low enough? :P Quote Link to comment
Madness Posted March 23, 2010 Report Share Posted March 23, 2010 bob you really have to lower that NSX... you could hit the trails with that thing! BTW parking in the dip is cheating... oh and how many freakin vehicles do you own? Quote Link to comment
goes2fast Posted March 30, 2010 Report Share Posted March 30, 2010 Bob, Just found this thread, you are a lucky guy, if I would have found that KC, it would have been in my shop instead of yours! LOL!:lol: Now that the weather is getting better, we need to get that M&G going. As soon as the doctor OKs me to drive again I'd like to at least drive down to meet you and take a look at your toys. I've been home from the hospital for a week as of today, and I'm working on my KC doing little things as I can, I can't pickup more than 10lbs, can't bend over, or twist, so I'm not getting much done, but I'm finding enough to keep busy. Did you ever find out what the electrical problem was? I have a gremlin on mine now, Ignition switch works, but no power is making it to the relay, without bending or twisting it's hard to look for the cause. I agree with the other guy, you should keep it in the family this time, either S15 or maybe 350Z? If you don't like any of the Nissan suspension options, at least use Nissan power. Later,:cool: Quote Link to comment
Bob3 Posted April 24, 2010 Author Report Share Posted April 24, 2010 The MX520 is still at the body shop and I finally got a little time in my shop today. So . . . I built an air-dam for the 620! I had nothing else to do - we were snowed in! :P Quote Link to comment
mklotz70 Posted April 24, 2010 Report Share Posted April 24, 2010 snowed in? with that shop? Boo hoo! I'm all broke up for you!!! :) lol!!! Nice dam :) Quote Link to comment
Bob3 Posted April 24, 2010 Author Report Share Posted April 24, 2010 snowed in? with that shop? Boo hoo! I'm all broke up for you!!! :) lol!!! Nice dam :) Thanks Mike! LOL :P Quote Link to comment
Bob3 Posted April 24, 2010 Author Report Share Posted April 24, 2010 I repainted my grille and cleaned up the front end. Before & after pics . . . Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.