Zeusimo
-
Posts
1,635 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Store
Classifieds
Everything posted by Zeusimo
-
I Have An L16 Intake Lemme Know
-
Hey Man, PM Me Your Phone # Plz Interested In The Nardi
-
Well My Head Was Warped And Caused A Blown Head Gasket Then Water Started To Mix Into The Oil Between 2-3
-
Why Would You Add Washers To The Head Bolts? Maybe Your Head Is Warped... But That Would Cause Oil To Mix In? I Would Have The Intake Manifold Checked Out Too
-
It Idles At 800 It's A 5 Speed I Don't Hear Any Leaks But It Is Missing The Choke And Air Cleaner P.O. Threw Them Away...
-
Hey Everyone. I Just Finished Making The 610 Drivable Runs Good And Drives Like A Champ But When Comming To A Complete Stop, It Stalls As If I Turned It Off If I Slow Down Really Hard It Wants To Stall But Doesn't To Stop I Have To Slow Down To Where I'm Bearly Rolling And Then Stop Completely It Doesn't Do This When It's Idling Just When I'm Comming To A Full Stop I'm Kinda Confused... Idk
-
610 Stalls When Comming To A Stop.. What's Wrong?
- Show previous comments 5 more
-
Clogged idle jet
-
was the engine warmed up?
-
Cold And Warm Doesn't Matter
My Truck Doesn't Even Have A Switch And It Runs Fine..
-
What Exactly Are You Taking About?? Swap Out To What?
-
Wanna Sell Me Your Door Panels, Center Console And E-Brake Assembly?? :P Nice 610 BTW... ...Oh, And Needs Moar Loar
-
L18 Cam Tower Torque Specs??
- Show previous comments 5 more
-
I just checked a Z forum, race and modify datsun book say 10-13. And that the headbolts end up holding it down too. Der, bolts going into aluminum should never be torqued so high.
-
Make sure there is no crud under towers....torque in 3 stages...5-10-12 lbs
-
^^^ sealik has it correct. In addition ... make sure the cam spins freely after.. if not don't bother
-
Nobody Likes Pics.. Post OICS :)
-
How Much Shorter Are 280ZX Struts Vs. 610??
-
I know they are nearly 2 inches shorter than 510... I would assume the same for 610...
-
Grease monkey swapped his, the tube is about an inch and a half shorter, but with the preload he runs its about the same ride hieght
-
Im sure glad banner remebers this stuff, cause i dont. I also did a funky spring combo as well. So maybe thats why it seems the same
-
-
Haha Battery Was Completely Drained Cuz It Didn't Even Want To Push Start Anymore.. It's All Good Though I Changed The Alt Last Night :)
-
Haha I Was Gone Half The Time Trying To Find A Bank That Was Open And Then I Had To Get The Battery From The 710 Charged.. :o
-
Anything Of My Truck? Or 710..? :)
-
Are 15x8 Rewinds Worth 300?
- Show previous comments 1 more
-
Good Condition
With Good Tires
-
Never heard of a 15x8 Konig rewind
they come in 14x7 and 15x7
-
Yeah but measured wrong a 7 inch rim is 8" lol
-
Haha.. That 710's Alternator Died The Way There!! Ran Off The Battery For A While Until It Completely Drained Had Autozone Charge It And It Made It Back Home :) But All Is Good Now.. We Just Changed The Alt
-
Guy Goes To Same School I Do Anyways.. Chinese Food Afterwards :D
-
Looking For This Goes Fron The Exhaust Manifold To The Intake
-
Get A Quality Pump No POS Vatozone
-
I Mean... Get The Cyl You Just Bought Take It To Autozone Tell Them You Want A Bleeder Valve For It
-
Take The Part Back To Autozone They Sell Bleeder Valves For Like $3
-
Ok.. So On My 610, I Need A Master Cyl It Still Has The Original Nabco One It Works... But It's Leaking It Has A 280ZX 5 Speed Do I Get A 610 Master Or..280ZX?
