Zeusimo

Once Your Starter Goes Out.. It Will Be The Best Time To Upgrade To A Gear-Reduction Starter :P

Cb7tuner - You Have To Reach A Certain Number Of Noob Posts Before Actually Becoming A Member <_< El Camino Central - Started A Build Thread.. But Theres What.. 5 Active Poster On The Site? :huh: Ratsun > Anything :P

I Have Monroe Load Adjusting Shocks They Ride SMOOTH They Lift The Rear 1/2" But You Can Load The Truck And It Only Saggs 1"

Is This A Troll?

Nope.... My Friend Has A 75 Camaro And He Has To Smog It Maybe It Has To Be Before A Specific Date?... IDK <_<

Lol... Who Cares Atleast We Know Those Bump-Stops Fit On Non Balljoint Trucks :lol:

Huh... Thats Weird I Had To Cut Them In Order For Them To Fit I Also Didn't Need To Drill Or Tapp Anything :huh:

Did Someone Say Rake :P

Needs Moar Dub-Step

What? Got Mine For $80 PAIR

なに？ Twenty Bucks Off With A Loaded Autozone Rewards Card

Orr $20 With Your 5 Points :)

Getting The Shims Together Is Basic Trial And Error But You Could Also Go To A Rear-End Shop And They Will Get The Angle Right For You ;)

Even If You Slam Your Truck You Can Still Use It Last Week I Hauled Tons Of Concrete And Dirt It All Comes Down To What Shocks You Install The Ones Monroe Supply Only Sagg 1"

Make Sure To Get An Alignment When You're Done :cool:

Try Again :cool:

Junk Yards Got Em' For $40 :lol:

The Only Problem You Will Have With Lowering A 620 Is That The Exhaust Is An Inch Off The Pavement <_< Mines Almost 5' Up Front.. Rides Good And I Still Have Stock Shocks Gonna Get KYBs To Get It To Ride Like The Back Does :P But I'm Also Running 225/75 :mellow:

How Did You Tuck Those Wires!?? :o

You Will Have A Shitty Ride :mellow: (Seriously... 620 Leafs Are Stiff)

Moderate 2-3 Inch Drop Front Re-Index Torsion Bar 1 Tooth Off And Run Pinto KYBs Rear 4X4 Leaf Springs And Monroe Self Leveling Shocks After That Have The Front End Aligned And Set The Pinion Angle DONE :P Now If You Want 5" :rofl: Front Lower Bumpstop Mounts, Lo-Profile Bumpstops, Machine Spindles, Raise Shock Towers Stock KYBs, Re-Index 2 Teeth Off Rear C-Notch Frame, 4X4 Springs, 3" Blocks, 9 Degree Shims, Raise Bearing, Monroe Self-Leveling Shocks

Mmm Dem Wheels :Drool: