PercyTheAce Posted February 11, 2022 Report Share Posted February 11, 2022 Hey I was wondering if anybody has put the techno toy tuning coilovers for the 210 (b310) on a b210? Techno doesn’t have a specific section for the b210, so I’m open to other coilovers options as well https://technotoytuning.com/nissan/210/front-weld-coilover-kit-datsun-210 Quote Link to comment
mhub91 Posted March 7, 2022 Report Share Posted March 7, 2022 All Datsun coil over kits are the same except 240/260/280z, truck and early (pre 1968) cars and anything FWD. The 210, B210, 510, 610, 710, 810, Maxima, R30 Skyline, R31 Skyline, S110 200SX and S12 200SX are all the same in terms of what weld on coilover kits can be used. Yes, it fits. Quote Link to comment
ToastyBass Posted September 13, 2022 Report Share Posted September 13, 2022 I'm sorry I don't have any specifics about it, but my '75 B210 I bought at the end of July came with 280ZX coilovers up front. They look like they were a bolt-on upgrade, but I haven't taken the wheels off yet and gotten a good look at the front spindles. Quote Link to comment
Motorvated Posted September 16, 2022 Report Share Posted September 16, 2022 I got coilovers made for my B210. My struts were from a 310 I have a couple of videos: 1 Quote Link to comment
Hawaiian620 Posted September 16, 2022 Report Share Posted September 16, 2022 (edited) I also just got done with the coilovers on my 210. I went with Gecko Racing after seeing others on this site going with this company. One this to note is the fronts don't have a bracket for the brake line. Seems fine for now, but I might come up with something to hold it away from the shock. Edited September 16, 2022 by Hawaiian620 1 Quote Link to comment
datzenmike Posted September 16, 2022 Report Share Posted September 16, 2022 On 9/13/2022 at 8:46 AM, ToastyBass said: I'm sorry I don't have any specifics about it, but my '75 B210 I bought at the end of July came with 280ZX coilovers up front. They look like they were a bolt-on upgrade, but I haven't taken the wheels off yet and gotten a good look at the front spindles. Ignore the coil spring as these are 280zx coils and won't be used on a B-210, in fact not used on anything but a Z car. The caliper is massive and the rotor vented. They cannot ever be mistaken for B-210 brakes with a pie plate for a rotor.. 2 Quote Link to comment
roadkill2525 Posted May 18, 2023 Report Share Posted May 18, 2023 I'm running a pair of T3 510 Evolved coil overs, needed some trimming around the strut tower opening for the camber plates but bolted on fine. 2 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.