Jump to content

roadkill2525

Members
  • Content Count

    89
  • Joined

  • Last visited

Everything posted by roadkill2525

  1. You can also procure parts from forklift supply companies, Nissan made forklifts with plenty of part sharing.
  2. This is for the H150A and H165 axle bearings: 43215-H5000
  3. Here's some insight into the horrendous body kit. http://japanesenostalgiccar.com/turn-your-datsun-into-a-champion-with-the-210zx/
  4. Time Left: 2 days and 11 hours

    • WANTED
    • USED

    Looking for a set of leaf springs for a 1974-78 B210 or 1975-79 200SX.

    NO VALUE SPECIFIED

  5. I've been looking for B210 and 200SX springs but have come up with nothing so far, just exploring my options
  6. Looking for replacement springs for my damaged B210, going through Datsun1200.com there is a discussion of composite leaf springs in their wiki and a topic in the forum but nothing about being purchased or used. Are composite leaf springs as good or better than OEM? Worth the cost?
  7. As stated by the police officers, since we were the only cars there when we hit and both of us are claiming we had a green light the police can't charge anything. I know I knock big brother most of the time but a traffic camera at a location where there have been numerous accidents would be nice to show what happened.
  8. On the way to work I got hit be a driver who ran a red light, we don't have collision coverage so already starting to look for replacement parts. The biggest thing is the Minilite is toast but still holds air and the driver side leaf is twisted.
  9. http://www.datsun1200.asia/search?q=speedometer&search_button.x=0&search_button.y=0
  10. Currently having the differential overhauled, new bearings for the carrier and pinion. I've got everything aside from the pinion spacer (38165-N5000) which seems to be discontinued, aside from Pitroad-TS. Anyone might have a source for this part?
  11. Found a clock out of Australia, delivered by a platypus. Circuit board is damaged but repairable.
  12. Got this back in June, Sunny Excellence GX grille. Now to find the hood.
  13. Looking at replacing the off brand aftermarket stereo head unit, don't know if the speakers were replaced. Planning on using Pioneer but recommendations for speakers and head unit.
  14. They'll work, I'm currently running the 510 GTX2 control arm and tc rod, endlinks, braided brake lines and Futofab swaybar.
  15. Starting to look at moving up to a Weber, kit K8624 is the California legal 32/36 DGEV. Pros/Cons? I'd like to keep the air cleaner for a stock appearance.
  16. Passed smog, good for two more years.
  17. With the S10 Silvia/200SX being based off the B210, I've been wondering of the H165 read end from the 200SX will fit without or little modification.
  18. Looking at these from B Projects Japan. JUN Machine Shop - 3.8kgs (8.3lbs) Kameari Engine Works - 3.4kgs (7.49lbs) or 2.95kgs (6.5lbs) B Projects - 2.95kgs (6.5lbs)
  19. I've also looked at lightweight flywheels, are these overkill for a daily driver?
  20. Looking at doing the clutch soon, haven't found much for the 63 series 5 speed. Will the 24 tooth clutch kits for the 200SX's 63 series work for the the B210's? Don't know if there is different dimensions between the bellhousing on the A and L series equipped with the 63 series transmissions.
  21. Picked up some free wheels.
  22. When the manifold gasket was replaced before the manifolds were bolted together and then to the head, they weren't lined up because you can feel a difference in the level of the manifolds. The mechanic had dropped off with his machinist, it's been welded and surfaced. The exhaust manifold will be surfaced as well. afracer, it is a '78 California model so I can't do much of anything without being failed for smog visual inspection.
  23. Having the manifold gasket replaced and this was found while being taken off.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.