nvestor88 Posted May 31, 2019 Report Share Posted May 31, 2019 Anyone running msd blaster 8252 coil? Wanna see some potential mounting locations. Thanks! Quote Link to comment
G-Duax Posted May 31, 2019 Report Share Posted May 31, 2019 I'm running a Crane LS91, which is the same type of coil, and I have mine strait over from the distributor on the fender, near the top, next to the hood on my 620. But you didn't say what vehicle... Quote Link to comment
nvestor88 Posted June 1, 2019 Author Report Share Posted June 1, 2019 510, you have a pic of it mounted? What wires are you using? Quote Link to comment
BrandonS Posted June 2, 2019 Report Share Posted June 2, 2019 I have similar coil from Summit in my car. I put it on the radiator support in front of the distributor. Quote Link to comment
nvestor88 Posted June 5, 2019 Author Report Share Posted June 5, 2019 Which spark plug wires are members using? Having an issue now tryin to find the correct coil wire. Quote Link to comment
datzenmike Posted June 5, 2019 Report Share Posted June 5, 2019 I run what the factory sold them with...NGK plugs and replaced the wires with NGK made, stock factory coil and EI matchbox from a later year. Quote Link to comment
banzai510(hainz) Posted June 5, 2019 Report Share Posted June 5, 2019 NKG NE64 is the wire set. amazon, rockauto, and elsewhere Quote Link to comment
nvestor88 Posted June 8, 2019 Author Report Share Posted June 8, 2019 The coil has a hei style cap. You need to modify a coil wire to fit it. Quote Link to comment
rosso Posted June 30, 2019 Report Share Posted June 30, 2019 I plan to use a black blaster 2 coil in my VG33 swap into the 510 wagon and will put the coil in the stock location and stock bracket - two less holes I have to think about plugging and it's close to the distributor. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.