Angela Posted September 5, 2016 Report Share Posted September 5, 2016 Your build is coming along great Malachi! Your skills are impressive. Keep up the good work! Are you & Shiloe gonna make it to the next Eagle Rock event in November? Nice seeing you at the Cruise Nite...we gotta represent! :thumbup: 2 Quote Link to comment
soundboi Posted September 5, 2016 Report Share Posted September 5, 2016 very nice work, doing all the right things 1 Quote Link to comment
Charlie69 Posted September 5, 2016 Report Share Posted September 5, 2016 Welcome nice car, great upgrades and it is good to see a new member that contributes to the community from the start. Quote Link to comment
xUltra510 Posted September 10, 2016 Report Share Posted September 10, 2016 Sick! Following! Quote Link to comment
S30Jay Posted September 10, 2016 Report Share Posted September 10, 2016 Your exhaust came out great! It has a factory type of fit..... That's always a good thing. It's annoying when they bottom out. Keep rocking on this thing and driving it as well! Quote Link to comment
banzai510(hainz) Posted September 10, 2016 Report Share Posted September 10, 2016 Like the exaust except fot the tip. There are stainless type extensions that goes over but I like the stock type layout. Nice work who ever did it. nice straight How is your radiator holding up?.I got tiny leaks (China made) also what size spacer you use? how close to the alternator belt? I stuck a stock type 3 core in my 510 as the Champion was a little tighter fit but put it in my 521. where you put the thermocouplefor the heater fans? most put it on the outlet side of the thermostat or drilled on the rad? Quote Link to comment
Malachi Posted October 7, 2016 Author Report Share Posted October 7, 2016 Like the exaust except fot the tip. There are stainless type extensions that goes over but I like the stock type layout. Nice work who ever did it. nice straight How is your radiator holding up?.I got tiny leaks (China made) also what size spacer you use? how close to the alternator belt? I stuck a stock type 3 core in my 510 as the Champion was a little tighter fit but put it in my 521. where you put the thermocouplefor the heater fans? most put it on the outlet side of the thermostat or drilled on the rad? The radiator is holding up good I have about 7000 mile on it now. I'm not sure what size spacers I cut them all to get the rad as close as possible. I put the thermostat below the upper rad hose it was the probe type. Quote Link to comment
Malachi Posted October 7, 2016 Author Report Share Posted October 7, 2016 Since the last update I have added a rear sway bar, t3 kick panels, and a front air dam. here is a updated picture of the car. Quote Link to comment
banzai510(hainz) Posted October 7, 2016 Report Share Posted October 7, 2016 I like it Quote Link to comment
racerx Posted October 7, 2016 Report Share Posted October 7, 2016 Those supra rims? Quote Link to comment
Malachi Posted October 7, 2016 Author Report Share Posted October 7, 2016 Those supra rims? No they are 280zx rims Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.