Busta Nut Posted February 1, 2015 Report Share Posted February 1, 2015 Let's go!!! 1 Quote Link to comment
Busta Nut Posted February 1, 2015 Report Share Posted February 1, 2015 Kalani got them all blasted clean...... time to cut'em...... 68mm to the top...but we need the threads.....cutting out 54mm.... Quote Link to comment
Busta Nut Posted February 1, 2015 Report Share Posted February 1, 2015 I need waaaay moar practice..... After using up half the grinding wheel...... 1 Quote Link to comment
mrbigtanker Posted February 2, 2015 Report Share Posted February 2, 2015 If it holds your good busta 1 Quote Link to comment
Draker Posted February 2, 2015 Report Share Posted February 2, 2015 Probably more of your settings than anything. .. It'll hold. :) 1 Quote Link to comment
Busta Nut Posted February 2, 2015 Report Share Posted February 2, 2015 Probably more of your settings than anything. .. It'll hold. :) Ya....I think my wire speed was too fast and not hot enough...... Moar practice hopefully today if I can find those damn collars...... Quote Link to comment
skyblue Posted February 2, 2015 Report Share Posted February 2, 2015 Honed the cylinders some more. 1 Quote Link to comment
mrbigtanker Posted February 2, 2015 Report Share Posted February 2, 2015 Only 1600 ? Is that for now or permanent? Quote Link to comment
Busta Nut Posted February 2, 2015 Report Share Posted February 2, 2015 Only 1600 ? Is that for now or permanent? For now.....he needs a reliable daily..... .....spending money where we need to only..... We will always accept donations though.... :poke: 2 Quote Link to comment
Busta Nut Posted February 2, 2015 Report Share Posted February 2, 2015 I have 2 other engines to build so Skyblue is taking over Kalani's engine..... .......he's got that in and out motion down.. :rofl: 4 Quote Link to comment
TENDRIL Posted February 2, 2015 Report Share Posted February 2, 2015 That's why the ladies love him ;) 2 Quote Link to comment
mrbigtanker Posted February 2, 2015 Report Share Posted February 2, 2015 Do you guys even have jobs.lol 4 Quote Link to comment
Duke Posted February 2, 2015 Report Share Posted February 2, 2015 I need waaaay moar practice..... After using up half the grinding wheel...... Looks like you were lacking gas coverage. Sorry to sound like a dick, but these are not the kind of welds that should be on a suspension member. Practice on scrap, not on critical parts. 3 Quote Link to comment
mrbigtanker Posted February 2, 2015 Report Share Posted February 2, 2015 Union? Fuck unions. 1 Quote Link to comment
skyblue Posted February 3, 2015 Report Share Posted February 3, 2015 That's why the ladies love him ;) yea they do. :rofl: Quote Link to comment
TENDRIL Posted February 3, 2015 Report Share Posted February 3, 2015 I need waaaay moar practice..... After using up half the grinding wheel...... Power too low, wire speed to high, too much stop and go, cup too far or to close Quote Link to comment
TENDRIL Posted February 3, 2015 Report Share Posted February 3, 2015 Ya....I think my wire speed was too fast and not hot enough...... Moar practice hopefully today if I can find those damn collars...... Lol beat me to it, didn't see that haha 1 Quote Link to comment
r0p0doe Posted February 3, 2015 Report Share Posted February 3, 2015 For a second I thought that prelude had a motor sticking out of it :rofl: 2 Quote Link to comment
Kalani Posted February 3, 2015 Author Report Share Posted February 3, 2015 when they were ready for cuttin' professional Quote Link to comment
Kalani Posted February 3, 2015 Author Report Share Posted February 3, 2015 :ninja: finally 2 Quote Link to comment
Kalani Posted February 3, 2015 Author Report Share Posted February 3, 2015 just mocking it up for now. gets me stoooooked oh and some seats from my buddies e30. $free.99 6 Quote Link to comment
Janksun Posted February 4, 2015 Report Share Posted February 4, 2015 I need waaaay moar practice..... After using up half the grinding wheel...... I can't tell if you did it or not, but if you use a grinding wheel and put a 45 degree bevel on the edges of the material to be welded back together it's helps out a lot. 2 Quote Link to comment
skyblue Posted February 4, 2015 Report Share Posted February 4, 2015 cylinders done. 3 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.