datson4life Posted July 8, 2014 Author Report Share Posted July 8, 2014 Did not know local auto parts stores stocked up on new u joints, the front and back ones are caca, maybe thats what caused the clinging noise everytime i shifted 1 Quote Link to comment
]2eDeYe Posted July 8, 2014 Report Share Posted July 8, 2014 That would do it. Was the driveshaft allowing gear oil to pass through the slip yoke? 1 Quote Link to comment
datson4life Posted July 8, 2014 Author Report Share Posted July 8, 2014 Yes, oil everywhere, and front u joints is loose , and rear one is dry and done 1 Quote Link to comment
datson4life Posted July 8, 2014 Author Report Share Posted July 8, 2014 I was taught how to upload pics thru phone , so this topic will be full of them, heres the plugs, expandable is too thick and slips out, 41mm is too big, 40mm is perfect, with some good silicone on the walls 3 Quote Link to comment
uberkevin Posted July 8, 2014 Report Share Posted July 8, 2014 So your putting a one peace in? 1 Quote Link to comment
datson4life Posted July 8, 2014 Author Report Share Posted July 8, 2014 One piece not yet, carrier bearing still is nice in this 1 Quote Link to comment
uberkevin Posted July 9, 2014 Report Share Posted July 9, 2014 Only wondering I guess. I just picked up a one piece. 1 Quote Link to comment
datson4life Posted July 9, 2014 Author Report Share Posted July 9, 2014 One piece is nice, orange 521 has one piece 1 Quote Link to comment
uberkevin Posted July 10, 2014 Report Share Posted July 10, 2014 You get it made or from a 520? 1 Quote Link to comment
datson4life Posted July 10, 2014 Author Report Share Posted July 10, 2014 Got it made 1 Quote Link to comment
DanielC Posted July 10, 2014 Report Share Posted July 10, 2014 I just got a new drive shaft center support bearing from Nissan, 37521-20402. 1 Quote Link to comment
datson4life Posted July 11, 2014 Author Report Share Posted July 11, 2014 Sweet thanks ^ Driveline in, no more pinging and clinging, but now temp and speedometer dont work, one thing after another, u get use to it with these trucks 1 Quote Link to comment
datson4life Posted July 11, 2014 Author Report Share Posted July 11, 2014 This one came with a radiator that over cools lol Anybody have experience with a radiator by winner racing? Sounds China, its fat and cools too good 1 Quote Link to comment
Busta Nut Posted July 11, 2014 Report Share Posted July 11, 2014 Looks just like the Champion.....cools great....as long as it doesn't leak.... :lol: 1 Quote Link to comment
datson4life Posted July 12, 2014 Author Report Share Posted July 12, 2014 Thats what i thought, does look like champion, but says winner racing, its probably a champion knockoff lol 1 Quote Link to comment
datson4life Posted July 25, 2014 Author Report Share Posted July 25, 2014 Did a few stuff this week, fixed thermostat housing, went l.e.d on cluster, and gave it a dose of low witg the help of konig209 1 Quote Link to comment
datson4life Posted July 25, 2014 Author Report Share Posted July 25, 2014 After 3 Quote Link to comment
mrbigtanker Posted July 25, 2014 Report Share Posted July 25, 2014 I like it,I like it a lot.very nice. 2 Quote Link to comment
derek72_521 Posted July 25, 2014 Report Share Posted July 25, 2014 i like the stance, how much did u lower front and back? 1 Quote Link to comment
datson4life Posted July 25, 2014 Author Report Share Posted July 25, 2014 About 4.5 inches, took off bumpstops, and surprisingly its still a really soft ride, im in love, drove it a bit, now exhaust/ intake gasket has a fat leak 1 Quote Link to comment
earlyvws Posted July 25, 2014 Report Share Posted July 25, 2014 Wow, that looks clean. Love this truck. 2 Quote Link to comment
datson4life Posted July 25, 2014 Author Report Share Posted July 25, 2014 Thanks dude 1 Quote Link to comment
uberkevin Posted July 25, 2014 Report Share Posted July 25, 2014 Hell yeah looks sweet man. 2 Quote Link to comment
datson4life Posted July 25, 2014 Author Report Share Posted July 25, 2014 Hope i can get tires soon so i can slap on those powder coated wheels i have 1 Quote Link to comment
datson4life Posted July 27, 2014 Author Report Share Posted July 27, 2014 I use to not like those mirrors, but now im starting to like them 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.