block paint

[Eagle_Adam]

thanks man! but ill pass for now, the gas involved kills it for me 

[izzo]

Offer is valid anytime, now or later, yo!  PS, I used to drive a minivan like that. I know the gas costs.  Luckily for me it only costs me less than 20 bucks now to your place and back :D  Now to just get my effing five speed in the wagon.  Brakes tonight, transmission the next three days.  Giving myself lots of time and room for error.

[RedBanner]

I never even tried a clear coat because just the.paint was pretty gloss. I might try it this next time tho.

[Eagle_Adam]

zebras dont come in gloss yo 

[RedBanner]

Bad ass ones do.

[Eagle_Adam]

dont forget your glitter topcoat prior to gloss 

[Eomund]

zebras dont come in gloss yo 

This

Don't know why, just do it.....

 

[RedBanner]

Aaaaaaahhhhh yeeeaaaahh!

[K_trip]

- removed -

[izzo]

^^ looks more of a robins egg blue then a datsun blue.  lulz. Still clean tho!

[K_trip]

- removed -

[GreaseMonky]

I Like VHT, and will be painting 3 engines with that very soon, my price is $7 a can and it comes in more colors then any other manufactuer, and I always use the primer first, I have never used the the clear tho,

 

 

by the way they have a purple part #sp149, or a lavender sp758, a magenta sp754

 

they have a purple anodized paint as well part#sp452, i have a book, i can look anything up if need be

[Stoffregen Motorsports]

If I remember correctly, Chrysler light blue is the closest match.

[MicroMachinery]

I used the Duplicolor Engine Enamel Pontiac Blue on my LZ23. I really like it, especially in contrast to the brass freeze plugs.

[GreaseMonky]

I used the Duplicolor Engine Enamel Pontiac Blue on my LZ23. I really like it, especially in contrast to the brass freeze plugs.

 

I really like the look of engines painted with the brass freeze plugs in there natural fourm, if there steel freeze plugs, i say paint them to

[crackerjack69]

oh the things i would do with a compressor and a spray gun......

 

Remember, I've got a construction grade compressor, virgin compressor hose, and a virgin HVLP. You're welcome to borrow them at any time.

[Eagle_Adam]

mmmmmm, so fresh and so clean clean 

 

[izzo]

Purple will go good with the red engine bay, yo

[Eagle_Adam]

Remember, I've got a construction grade compressor, virgin compressor hose, and a virgin HVLP. You're welcome to borrow them at any time.

 

 

HOT DAMN!!!!! i may just borrow that to put paint on the truck!! 

[K_trip]

- removed -

[Eagle_Adam]

it is!!! and it will be purple before too long  :devil:

[h2oprint]

I use automotive paint from ppg, everything i have done has not had an issue. It is rated for 450 degrees, and if the bay gets hotter than that, you need not worry about the paint.

[Eagle_Adam]

BLAM!!

 

[Stoffregen Motorsports]

What is that? A motor from my little pony? You should paint a rainbow on the side.

[Eagle_Adam]

with enough LSD anything and can be anything if you want it to ;)

 

 

but in all seriousness, this motor is going in my girls goon

 

 

and you can hate/tease all you want but its got L28 flat tops in it