Eagle_Adam Posted October 1, 2013 Author Report Share Posted October 1, 2013 EGR delete plate came in today Quote Link to comment
Eric Garside Posted October 1, 2013 Report Share Posted October 1, 2013 How do the DNJ products look in person? I was looking at their DE master kit on RockAuto and was curious about the quality... Quote Link to comment
Eagle_Adam Posted October 1, 2013 Author Report Share Posted October 1, 2013 looks fine to me...... but this is my first KA so we shall see Quote Link to comment
INDY510 Posted October 1, 2013 Report Share Posted October 1, 2013 Where did you get the egr delete plate??? ..... is it for a s13 KA24DE? Quote Link to comment
Eagle_Adam Posted October 1, 2013 Author Report Share Posted October 1, 2013 one more thing off the list! http://www.ebay.com/itm/261266445926 Where did you get the egr delete plate??? ..... is it for a s13 KA24DE? lazy indy doesnt read........ ;) 3 Quote Link to comment
Eagle_Adam Posted October 12, 2013 Author Report Share Posted October 12, 2013 Just got word my redeye mounts are done and shipped :) 2 Quote Link to comment
Eagle_Adam Posted October 14, 2013 Author Report Share Posted October 14, 2013 I think I'm honestly just gunna use a JY pump..... $25 and i get the mounting brackets too, then if it goes out i can get a brand new one from the stealership :) Wednesday marks the "start" of my KA swap! why? cus Wednesday my dad goes in for his hip replacement surgery, he will be down and out for 6 weeks minimum Quote Link to comment
]2eDeYe Posted October 14, 2013 Report Share Posted October 14, 2013 So coinciding the hip replacement with your transplant? :lol: Quote Link to comment
Eagle_Adam Posted October 14, 2013 Author Report Share Posted October 14, 2013 exactly!!!! cus i know he wont be able to drive stick for 6 weeks until his doc clears him so i can drive his truck while i KA swap my truck and NOT have to take the bus to work or bum rides or be rushed!!!!! 2 Quote Link to comment
red76datsun Posted October 14, 2013 Report Share Posted October 14, 2013 Come faster Wednesday!!! Let this begin Quote Link to comment
Eric Garside Posted October 14, 2013 Report Share Posted October 14, 2013 I think I'm honestly just gunna use a JY pump..... $25 and i get the mounting brackets too, then if it goes out i can get a brand new one from the stealership :) Wednesday marks the "start" of my KA swap! why? cus Wednesday my dad goes in for his hip replacement surgery, he will be down and out for 6 weeks minimum I have a Volvo pump for my swap. J/Y's have lots of them, they are easy to get/pull, and I think mine was only $7. They are located right in front of the rear drivers side tire. I havent plumbed mine yet but it looks like a few fittings from the parts store and some pocket Maxima fuel line clamps (thanks Redeye!) and you should be good to go! Quote Link to comment
Eagle_Adam Posted October 14, 2013 Author Report Share Posted October 14, 2013 Come faster Wednesday!!! Let this begin no no no........ i need today and tomorrow to finish lowering my GF's goon so i can focus on the swap ;P I have a Volvo pump for my swap. J/Y's have lots of them, they are easy to get/pull, and I think mine was only $7. They are located right in front of the rear drivers side tire. I havent plumbed mine yet but it looks like a few fittings from the parts store and some pocket Maxima fuel line clamps (thanks Redeye!) and you should be good to go! good to know, i figure as long as the car/truck has an inline pump and a motor thats 2.4l or bigger im safe :) Quote Link to comment
]2eDeYe Posted October 15, 2013 Report Share Posted October 15, 2013 When the volvo pump goes you should switch to the Airtex E1000, It's used on a bunch of different factory built cars and mine was $100 brand new. Edit: I didn't use the volvo pump I go from the JY was due to the fact that I broke one of the fittings and could not source a replacement because of the thread size. I like to be able to get stuff like that. Quote Link to comment
Eagle_Adam Posted October 15, 2013 Author Report Share Posted October 15, 2013 new throttle cable is here Quote Link to comment
Eagle_Adam Posted October 15, 2013 Author Report Share Posted October 15, 2013 its like freek X-mas today!!!! got my Redeye mounts in the mail today!!!!!!!!! just gotta slot the trans crosmember when i pull the Lmotor out and im ready for a test fit!!!!!! 1 Quote Link to comment
]2eDeYe Posted October 15, 2013 Report Share Posted October 15, 2013 Hey those are nice looking mounts :rofl: 2 Quote Link to comment
Eagle_Adam Posted October 15, 2013 Author Report Share Posted October 15, 2013 seriously, i was told this hippy up north makes em!!!!!!!! you should get a hold of that guy, he makes a pretty damn fine product! he even powdercoated them for me!!!!! 3 Quote Link to comment
jrock4224 Posted October 15, 2013 Report Share Posted October 15, 2013 seriously, i was told this hippy up north makes em!!!!!!!! you should get a hold of that guy, he makes a pretty damn fine product! he even powdercoated them for me!!!!! traitor :poke: 1 Quote Link to comment
Eagle_Adam Posted October 16, 2013 Author Report Share Posted October 16, 2013 traitor :poke: :/ Quote Link to comment
Eagle_Adam Posted October 17, 2013 Author Report Share Posted October 17, 2013 Well, my pops had his hip replacement surgery yesterday, so its game on boys n girls! picked up one of my KA24DE's from storage along with the 5 speed i got with it picked up a new clutch too motor and trans are split motors on the stand started pulling things i dont need fan clutch EGR emissions BS old motor mounts ended the night with giving the motor a bath in 2 cans of break clean then pulled the cam cover to see what i was working with 1 Quote Link to comment
Eagle_Adam Posted October 21, 2013 Author Report Share Posted October 21, 2013 cool vid to referrance later Quote Link to comment
Eagle_Adam Posted October 21, 2013 Author Report Share Posted October 21, 2013 also awesome.... 1 Quote Link to comment
Eagle_Adam Posted October 21, 2013 Author Report Share Posted October 21, 2013 on a freekn roll today! http://www.ka-t.org/forums/viewtopic.php?t=4156 Quote Link to comment
Eagle_Adam Posted October 21, 2013 Author Report Share Posted October 21, 2013 another good one for future referrance: http://forums.nicoclub.com/s13-head-teardown-progress-pictures-t272493.html Quote Link to comment
Eagle_Adam Posted October 26, 2013 Author Report Share Posted October 26, 2013 There's always something about every car I've ever had that pisses me off..... ALWAYS!!!! In the 620, it's the glove box made from fucking cardboard.... So I set out to fix that! Introducing a new metal glovebox insert for all 620's!!! Once I have the first one in and working they will be FS :) This will also provide a sweet place to mount the custom control box being made for my engine swap :) 5 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.