KA620KC Posted September 19, 2013 Report Share Posted September 19, 2013 I have a turbo sitting in my garage taunting me everyday!! I'm running happy gas in my DE right now but that gets expensive every time i wanna refill. I'm thinking tax time well be boost time!! 1 Quote Link to comment
heretic Posted September 19, 2013 Report Share Posted September 19, 2013 this is going to be AWESOME.!!!! 1 Quote Link to comment
]2eDeYe Posted September 20, 2013 Report Share Posted September 20, 2013 whats stopping you? The next build :) Quote Link to comment
KA620KC Posted September 20, 2013 Report Share Posted September 20, 2013 What size tires are you running on your minty greens there? I'm running 235/45/18's with the torsions cranked pretty much all the way down, a middle leaf yanked and 3" blocks. My tires are way too tall though even though they are only 1/2" taller then my stock 195's on the 14" rims. Yours and Redeye's look perfectly sized. Quote Link to comment
]2eDeYe Posted September 20, 2013 Report Share Posted September 20, 2013 225/40 18 on mine. Quote Link to comment
Eagle_Adam Posted September 20, 2013 Author Report Share Posted September 20, 2013 i didnt drive mine today so ill check when i get home Quote Link to comment
Eagle_Adam Posted September 23, 2013 Author Report Share Posted September 23, 2013 found a good write up on the PS delete http://www.ka-t.org/forums/viewtopic.php?t=34921 figured id share what another member found for me!! pass it on :D Quote Link to comment
Eagle_Adam Posted September 23, 2013 Author Report Share Posted September 23, 2013 this is just for my reference: gasket kit timing kit headbolts Flip center-link fuel pump( inline pump near the tank, with a filter between it and the tank.) power steering delete exhaust mani if the header doesnt fit redeye mounts - http://community.ratsun.net/topic/39780-620-ka24-motor-mount-brackets/ truck KA slave cylinder and hose - using what i already have centerlink, ball joints, and tierods, end links, and sway bar bushings reverse taper for flipped centerlink new exhaust..... again pathfinder accelerator cable 3 or 4 90 degree bends for the heater hoses figure out radiator hoses powder coating figure out ECU mounting nail down wire and relay routing for the wire tuck fuel line clamps from a maxima (JY grab) and new high pressure fuel line electric fans electric fan controller EGR delete - http://www.ebay.com/itm/261266445926 fuel pressure reg theres probably more :/ got a few things purchased today thanx to parts sales over the weekend!!! Quote Link to comment
Eagle_Adam Posted September 24, 2013 Author Report Share Posted September 24, 2013 one more thing off the list! http://www.ebay.com/itm/261266445926 Quote Link to comment
KA620KC Posted September 25, 2013 Report Share Posted September 25, 2013 If this helps i used fuel pump part number E2000 from airtex, it is a Ford fuel pump. I mounted mines below the fuel tank right on the frame rail. Be sure to use the rubber isolators that come with it. If not it will be really loud. For my radiator I'm using one from a 96 vw jetta. It has house outlets on the correct side too. It doesn't have a filler neck though, so i used one from a dodge Durango which is remote mounted. I was able to use a factory oem lower radiator hose from the 240sx with a just a little trimming. And I'm only using a 14" fan on the front of the radiator. Absolutely NO cooling issues either even in 100+ degree weather and racing the truck at the drag strip!! Quote Link to comment
Eagle_Adam Posted September 26, 2013 Author Report Share Posted September 26, 2013 shipped out a big box of parts in trade to Redeye for a set of his mounts!! getting closer and closer! also my dad came back from his trip to Germany last night and confirmed i can borrow his truck during the swap! GAME FUCKING ON!! 1 Quote Link to comment
Eagle_Adam Posted September 26, 2013 Author Report Share Posted September 26, 2013 got these and these hoses and these and these loaded calipers.... guess its time for a rear disc brakes!!!! 1 Quote Link to comment
Eagle_Adam Posted September 26, 2013 Author Report Share Posted September 26, 2013 boom! timing kit and gasket kit are here! time to tear into the motor 1 Quote Link to comment
]2eDeYe Posted September 26, 2013 Report Share Posted September 26, 2013 A tip for you. Pull the PCV housing off the timing cover before pulling the cover to avoid damaging the rubber line. I learned the hard way :) Quote Link to comment
red76datsun Posted September 27, 2013 Report Share Posted September 27, 2013 Parts are flowing in! Super stoked to see this with the new heart Quote Link to comment
Eagle_Adam Posted September 30, 2013 Author Report Share Posted September 30, 2013 these should look pretty good behind my titans i guess.... just cant help myself sometimes EDIT: these ended up being for a kingpin truck so i sold them...... i haz a sad 2 Quote Link to comment
nismo dr Posted September 30, 2013 Report Share Posted September 30, 2013 holy shite! :thumbup: Quote Link to comment
uberkevin Posted September 30, 2013 Report Share Posted September 30, 2013 Hell yeah!! Shits going yo look way nice! Quote Link to comment
Eagle_Adam Posted September 30, 2013 Author Report Share Posted September 30, 2013 holy shite! :thumbup: right?!?!?!? i traded an old single cam and my SU's for them so no cash outta pocket!!!!!!!!!! 1 Quote Link to comment
Eagle_Adam Posted September 30, 2013 Author Report Share Posted September 30, 2013 a little less exciting but still crucial new headbolts :) 1 Quote Link to comment
]2eDeYe Posted September 30, 2013 Report Share Posted September 30, 2013 Those brakes are very nice. :cool: 1 Quote Link to comment
jrock4224 Posted September 30, 2013 Report Share Posted September 30, 2013 pssshhhhh turbo ka 610 ftw....... 1 Quote Link to comment
Farmer Joe Posted September 30, 2013 Report Share Posted September 30, 2013 ho-lee-shit.. Quote Link to comment
Eagle_Adam Posted September 30, 2013 Author Report Share Posted September 30, 2013 these should look pretty good behind my titans i guess.... just cant help myself sometimes got these and these hoses and these and these loaded calipers.... guess its time for a rear disc brakes!!!! these ^^^^ means this vvvvv SHOULD NEVER HAPPEN AGAIN 3 Quote Link to comment
KA620KC Posted September 30, 2013 Report Share Posted September 30, 2013 Fap fap!!!! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.