BURLEIGH Posted February 1, 2013 Author Report Share Posted February 1, 2013 Send me a detailed list of all the carb stuff and I may want to cut a deal for everything. Trptrptrptrptrp@gmail.com Well, I've sold quite a bit since my original post..., but I'll make a list of whats left this weekend and post it up. Thanks! Link to comment
SunnyDaze Posted February 1, 2013 Report Share Posted February 1, 2013 Hi, do you have an A-series twin SU manifold or A-series exhaust manifold? Link to comment
BURLEIGH Posted February 1, 2013 Author Report Share Posted February 1, 2013 Hi, do you have an A-series twin SU manifold or A-series exhaust manifold? PM Sent! Link to comment
rat-a-dat-dat Posted February 1, 2013 Report Share Posted February 1, 2013 Do you happen to have a dual choke cable for the 38mm. SSS carbs? Link to comment
hurricane14 Posted February 1, 2013 Report Share Posted February 1, 2013 burleigh, following up on our PM's from yesterday regarding the a series parts. PM sent again. Link to comment
BURLEIGH Posted February 2, 2013 Author Report Share Posted February 2, 2013 Had a question about a couple of the manifolds I have and posted up about it here: http://community.ratsun.net/topic/51659-what-manifolds-are-these-from-a-series-twin-sus/ Let me know what ya think guys. Thanks! Richard Link to comment
Ron1200 Posted February 2, 2013 Report Share Posted February 2, 2013 Hi Richard I'm interested a 45 DCOE. Actually I'm interested in the Chokes, Venturi and Jets. Is one of the 45 DCOE a type 13? I've sent you a PM.. Thanks Ron Link to comment
BURLEIGH Posted February 2, 2013 Author Report Share Posted February 2, 2013 Hi RichardI'm interested a 45 DCOE. Actually I'm interested in the Chokes, Venturi and Jets. Is one of the 45 DCOE a type 13? I've sent you a PM.. Thanks Ron Replied... Thanks! Link to comment
danfiveten Posted February 15, 2013 Report Share Posted February 15, 2013 Sent you 2 pm's now, please get back to me about the parts i bought, never got told if they shipped yet or not. Thanks. 1 Link to comment
Z chopper Posted March 16, 2013 Report Share Posted March 16, 2013 interested in the white air filters Link to comment
Mnilges Posted March 19, 2013 Report Share Posted March 19, 2013 Hi, I'm looking for a metal cooling line that comes off the back carb on a 1973 240z with flat tops. It was only on the 1973 and it has a loop in it. It has a female flared fitting on both ends and it may be copper tubing. Thanks, Mark Link to comment
lostforawhile Posted March 19, 2013 Report Share Posted March 19, 2013 I sent you a pm,but are there direct links to the pictures of all those carbs? i want to print those and frame them for my garage wall, incredible Link to comment
BURLEIGH Posted March 27, 2013 Author Report Share Posted March 27, 2013 Sorry Guys, I've been out of pocket for a while... I'm back for a little while now though and can respond to questions here or via email. Thanks! Richard Link to comment
Just Joel Posted March 27, 2013 Report Share Posted March 27, 2013 What needles do you have? thanks Joel Link to comment
lostforawhile Posted March 27, 2013 Report Share Posted March 27, 2013 would you by any chance have an air cleaner gasket to fit one one of the early ones, that fit the 72 sss? i just need to make a pattern, but i can throw you a few bucks for an intact gasket Link to comment
BURLEIGH Posted March 27, 2013 Author Report Share Posted March 27, 2013 Joel, I have a bin full of various needles. What size are you looking for? Lost, I replied to your PM. Thanks! Richard Link to comment
BURLEIGH Posted March 27, 2013 Author Report Share Posted March 27, 2013 BTW, I'll take $800 plus shipping for everything that's left if any one is interested.. Gotta get this stuff gone!!! :-) Link to comment
Just Joel Posted March 27, 2013 Report Share Posted March 27, 2013 I'm looking for variety of Mxx needles... (m66, m76, etc.) Link to comment
BURLEIGH Posted March 27, 2013 Author Report Share Posted March 27, 2013 I'm looking for variety of Mxx needles... (m66, m76, etc.) I'll take a look through the bin tonight... Thanks! Link to comment
Just Joel Posted March 27, 2013 Report Share Posted March 27, 2013 sounds good, let me know... need sets of two, unbent, no scratches or significant wear. thanks Joel Link to comment
daltonryan620 Posted March 30, 2013 Report Share Posted March 30, 2013 do you have a set of mikunis with manifolds? if not su carbs would be nice. in lookin for a whole swap set for i have the stock hitachi in an L16 with an L18 top end and the motor does not like the power restriction much lol motor hates low rpm and carb hates high rpm :/ Link to comment
BURLEIGH Posted April 1, 2013 Author Report Share Posted April 1, 2013 do you have a set of mikunis with manifolds? if not su carbs would be nice. in lookin for a whole swap set for i have the stock hitachi in an L16 with an L18 top end and the motor does not like the power restriction much lol motor hates low rpm and carb hates high rpm :/ I have some SU's that would work for you, but no manifold... Shoot me an email or PM and we can discuss... Thanks! Richard Link to comment
lostforawhile Posted April 1, 2013 Report Share Posted April 1, 2013 to the guy trying to make them work with a cable, PM me, Ill send you some detailed pictures of how I did the ones on my old Accord, I think it's on the thread I did of the install, I used the eccentric piece off of a Keihin carburator Link to comment
Recommended Posts